纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Spectroscopic and Electrochemical Characterization of Cytochrome P450st‐DDAB Films on a Plastic‐Formed Carbon Electrode

We have studied the characterization of thermophilic cytochrome P450 (P450st)‐didodecyldimethylammonium bromide (DDAB) films by using UV‐vis absorption, resonance Raman spectroscopy, and electrochemical methods. The observed Raman spectrum indicated near‐native conformation of the heme iron in DDAB film on the surface of a glass slide, while on the surface of a plastic‐formed carbon (PFC) electrode, the conformation of P450st‐DDAB was very similar to that of heme‐DDAB film, suggesting the release of heme from P450st in DDAB films on PFC electrodes. When NaBr was added as salt to the casting solution, the result of Raman spectrum indicated near‐native conformation of P450st in DDAB film even on the PFC electrode, but no redox potential of P450st which has near native structure was observed. This study suggests the essential experimental conditions when working with heme protein‐DDAB films as, in some cases, heme iron from proteins is released on the surface of the electrode.     

Isoperichoric focusing field-flow fractionation and thin layer isoperichoric focusing based on coupling of gradient generated by primary field with secondary field action: general principles and performances

The primary field forces can generate spatially oriented gradient of the effective property of a continuum or pseudo-continuum fluid (carrier liquid). When this gradient is coupled with the action of a secondary field of identical or different nature the isoperichoric focused zones of the dispersed species can appear. Consequently, they can be separated according to differences responding to the property gradient of the carrier liquid. This concept can be applied under static (non-flow) conditions in thin layer focusing as well as under dynamic conditions with the elution due to the carrier liquid flow in focusing field-flow fractionation. The gradient established by the action of the primary field and the concentration distribution of the isoperichoric focused zone formed by the coupled effect of the gradient and of the primary or secondary field are described theoretically. The rigorous relationship describing the shape of the focused zone is compared with the approximate solutions. The performances of the proposed principle were evaluated by model calculations. Potential experimental configurations considering the implementation of the static and dynamic conditions are discussed. The generalized isoperichoric focusing theory can be applied to describe the particular processes operating in analytical and preparative focusing separations of the particles of various, but especially of biological origin.     

Challenges in the structural characterization of thin organic films

This review addresses the special problems associated with the micro-structural characterization of thin and ultrathin organic films, primarily by optical spectroscopies. Films which are deposited by Langmuir-Blodgett techniques, self-assembly chemistry, and bulk film deposition techniques are considered. The use of enhanced optical excitation using surface phasma resonances and integrated optical structures is discussed extensively, as is the use of ellipsometry. Discussion of the spectroscopies used is broken into a section on electronic spectroscopies and an extensive discussion of vibrational spectroscopies. Vibrational information may be obtained with photons (absorption or scattering) or electrons (loss spectra), and the types of experimental systems amenable to each, along with the advantages and disadvantages of each are explored.     

RuO2 electrode surface effects in electrocatalytic oxidation of glucose

We have studied the electrocatalytic activity of RuO₂-PVC film electrodes, fabricated using RuO₂ powders prepared at five different temperatures, viz., 300, 400, 500, 600 and 700°C, for the oxidation of glucose in high alkaline media, 1 to 3 M NaOH. The RuO₂-PVC film electrodes have been first characterized in 1 to 3 M NaOH solution by cyclic voltammetry (CV) and rotating disc electrode (RDE) techniques in a wide potential range −1,100 to 450 mV (SCE), and three redox pairs representing Ru(IV)/Ru(III), Ru(VI)/Ru(IV) and Ru(VII)/Ru(VI) transitions have been identified. The voltammetric peaks at low sweep rates have been analyzed using surface activity theory formulated for interacting electroactive adsorption sites, and interaction terms have been evaluated. The total voltammetric surface charges have been analyzed as per Trassatti’s formalism with respect to their dependence on potential sweep rate, and charges associated with less accessible and more accessible surface sites have been calculated. For glucose oxidation, the results have indicated that RuO₂ (700°C)-PVC electrode shows two oxidation peaks in contrast to RuO₂ (300°C)-PVC electrode. Also, RuO₂ (700°C)-PVC electrode exhibits higher intrinsic electrocatalytic activity than the 300°C electrode, although the former possesses lower electrochemically active surface area. Additionally, kinetic analyses made from RDE results with reference to Michealis–Menten (MM) enzyme catalysis has shown that RuO₂ (700°C) electrode possesses extended glucose-sensing range in terms of MM kinetic constant, K _M , compared to other electrodes. Possible reasons for such differences in the behavior of the electrodes of different temperatures towards glucose oxidation are identified from studies on oxidation of glucose in solutions of different pH, oxidation of different glucose derivatives, and also from physicochemical results from BET, XRD, SEM, DTGA, XPS analysis of RuO₂ powder samples.     

Molecular imprinting in ultrathin titania gel films via surface sol-gel process

Recent progresses of molecular imprinting in metal oxide matrices were summarized. Application of the surface sol-gel process to mixtures of organic carboxylic acids and titanium alkoxide provides ultrathin layers of titania gel (10-20 nm thick), in which molecule-sized cavities are kept intact upon removal of the organic templates. The imprinted cavity reflects the structural and functional features of the template molecule, and the enantioselective imprinting of dipeptide isomers is observed. Robustness and flexibility of the ultrathin titania layer is demonstrated by the formation of interconnected titania hollow structures. Possible practical applications and unsolved problems of this technique are discussed.     

Titanium‐implanted CaTiO3 films and their changes in Hanks' solution

Titanium‐implanted CaTiO₃ film was prepared and then characterized by x‐ray photoelectron spectroscopy (XPS) and Rutherford backscattering spectrometry (RBS) before and after immersion in Hanks' solution for 7 days. An as‐prepared specimen contained a small amount of Ar implanted during sputtering, although the pressure was as low as 10^?4 Torr. Even though Ar convolution increased with an increase in the relative Ti ion dose, most of the convoluted Ar was not from the Ar gas used for Ti ion production but rather was from the Ar gas used for sputtering the CaTiO₃. During Ti implantation, the CaTiO₃ films were ion‐etched by Ti ions. The composition of the CaTiO₃ film was not changed to any great degree by the Ti implantation, however its properties changed considerably. After immersion in Hanks' solution, the thickness of the specimen not implanted with Ti decreased the most whereas the [Ca]/[P] ratio, which was nearly unity before exposure, decreased significantly, becoming 0.23 on the Ti‐implanted specimen prepared at 200 W and 0.13 on the Ti‐implanted specimen prepared at 50 W. It was also observed by XPS that the ratio [Ca]/[P] was ～1.9 for all Ti‐implanted specimens after immersion in Hanks' solution for 7 days. Judging from the binding energies of Ca 2p_3/2 and P 2p electrons and the [Ca]/[P] ratio, it was suggested that a hydroxyapatite‐like substance had formed on the surfaces of the Ti‐implanted specimens after immersion in Hanks' solution. Copyright © 2003 John Wiley & Sons, Ltd.     

Structural and Optical Properties of Sol-Gel Derived Aluminosilicate Planar Waveguides Doped with Er3+ Ions

Er3+ doped-aluminosilicate thin films were prepared on silica and silica/Si substrates by the sol-gel process and dip-coating. The sol-gel aluminosilicate planar waveguides were prepared from silicon and aluminium alkoxides. Their structural characterization has been carried out by Raman spectroscopy, Atomic Force and Scanning Electron Microscopies. The results indicated that these films present an amorphous structure until an annealing temperature of 900°C, while at temperatures higher than 1000°C, crystallization occurs. An estimate of microcrystallite sizes using Raman spectroscopy is given, which agrees with data from scanning electron microscopy. The optical properties have been investigated by Fluorescence spectroscopy in the visible region.     

溶液成膜的温度对聚对苯二甲酸乙二酯结晶度的影响

<正> 用溶液成膜是制备聚合物薄膜的常用方法之一。但是溶液成膜的条件,如成膜温度,溶液浓度等对半结晶聚合物结晶度的影响研究报道较少。制备聚对苯二甲酸乙二酯(PET)非晶态薄膜通常使用熔融热压其后淬火的方法。由于PET在熔点附近易于降解,在薄膜中产生气泡,因而很难制备较大面积的均一厚度的薄膜,如在拉伸试验中所需