A cation trap for anodic stripping voltammetry: NH3–plasma treated carbon nanotubes for adsorption and detection of metal ions

NH₃–plasma treated multi-walled carbon nanotubes (pn-MWCNTs) with cation traps for the detection of ultratrace quantities of Zn(II), Cd(II), Cu(II), and Hg(II) using square wave anodic stripping voltammetry (SWASV) is described. The pn-MWCNTs use their adsorption performance to enhance the sensitivity. It is found that under optimized conditions Zn(II), Cd(II), Cu(II) and Hg(II) were individually detected at potentials of −1.16, −0.78, −0.268 and 0.108 V, respectively. The detection limit (3σ method) of 0.314, 0.0272, 0.2263, and 0.1439 nM toward Zn(II), Cd(II), Cu(II), and Hg(II) is achievable, respectively. No interference could be seen during the simultaneous detection of Zn(II), Cd(II), Cu(II), and Hg(II). The pn-MWCNTs exhibit excellent selectivity owing to the different ability of adsorption. A study of the ability of pn-MWCNTs in practical application is carried out using a sample of water collected from Dongpu Reservoir in Hefei City, Anhui, China. It is found that the results were favorable when compared against inductively coupled plasma atomic emission spectrometry (ICP-AES) analysis.     

Hydrophobic Vitamin B12. X. Steric Effect in Electrochemical Carbon-Skeleton Rearrangement Catalyzed by Hydrophobic Vitamin B12 in Nonaqueous Media

Abstract

A steric effect in the carbon-skeleton rearrangement catalyzed by heptamethyl cobyrinate perchlorate, [Cob(II)7C₁ester]C10₄, was investigated under electrochemical conditions. The controlled-potential electrolyses of alkyl halides having two carboxylic ester groups of different bulkiness on the same carbon atom, such as 2,2-bis(ethoxycarbonyl)-l-bromopropane, l-bromo-2-tert-butoxycarbonyl-2-ethoxy-carbonylpropane, l-bromo-2-cyclohexyloxycarbonyl-2-ethoxycarbonylpropane, and l-bromo-2-ethoxy-carbonyl-2-phenoxycarbonylpropane, were carried out in N,N-dimethylformamide, as catalyzed by [Cob(II)7C₁ester]CIO₄, to give the corresponding ester-migrated products in the dark at—1.5 V vs SCE in the presence of acetic acid and at—2.0 V vs SCE without acetic acid. As regards a correlation between bulkiness of an ester group and a migration aptitude, a smaller ester group tends to migrate to the adjacent carbon atom more readily than a larger one. The origin of such a steric effect is discussed with attention to the rate-determining step.     

CoO–xCo(OH)2 supported silver nanoparticles: electrosynthesis in acetonitrile and catalytic activity

1. Download : Download high-res image (151KB)
2. Download : Download full-size image

     

Electrochemically induced oxidative cyclization of 2,3‐dihydroxypyridine. Synthesis of a novel highly oxygenated heterocyclic compound

Electrochemical oxidation of 2,3‐dihydroxypyridine in aqueous phosphate buffer solution at a glassy carbon electrode has been studied using cyclic voltammetry and controlled potential coulometry. The results indicate that oxidation of 2,3‐dihydroxypyridine on glassy carbon electrode shows an irreversible feature in aqueous solution. This data indicates that the electrochemically generated pyridindione is unstable and via an oxidative conversion pathway converts to a novel highly oxygenated heterocyclic compound. By means of the obtained electrochemical data, an efficient, one‐pot method for the synthesis of this heterocyclic compound based on the oxidative cyclization of 2,3‐dihydroxypyridine under green conditions, and in a good yield and purity is described. Copyright © 2011 John Wiley & Sons, Ltd.     

Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Molecular Composites Comprising Rodlike Polyamides and Vinyl Polymers

Abstract

At present we have strong evidence that several members of a series of wholly-aromatic, para-linked, rodlike polyamides, polyesters, and polyesteramides form molecular composites with certain flexible-chain, thermoplastic polymers over a wide range of compositions. This paper reports on the initial results of an investigation of intermolecular interactions using spectroscopy and various scattering techniques as well as characterization of some of the mechanical and optical properties of these materials. The composites are made by two techniques: 1) photo-polymerization of a homogeneous solution of a rodlike polymer in a monomer containing a photoinitiation; 2) solvent evaporation from homogeneous solutions of very limited combinations of solvent, rodlike polymers and flexible polymers. While both of these techniques produce optically clear, nonscattering films of various thicknesses over the entire compositional range, e.g., 1–99 wt% of rodlike polymer, the latter is generally more convenient and has been used extensively in this study. Optical and electron microscopy, wide angle light scattering, and spectroscopic and thermal analysis support the view that these polymer combinations are truly molecularly dispersed.     

Trityl Salt-Initiated Cationic Polymerization of 1,2-Cyclohexene Oxide: Structural Analyses of the Products

The polymerization of 1,2-cyclohexene oxide was carried out at 0°C in dichloroethane with triphenylmethyl hexafluoroarsenate as the initiator. A typical reaction product (PCHO-1) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel-permeation chromatography, x-ray diffraction, and differential scanning calorimetry (DSC). The x-ray and DSC data show that PCHO-1 is an amorphous substance. The results of the NMR analyses show that the propagation step in the trityl salt-initiated polymerization obeys Bernoullian statistics with a P_m value of 0.38.     

基于2-苯基-4-喹啉酸及双咪唑类配体的钴(Ⅱ)配合物的合成、表征、磁性和电化学性质

利用2-苯基-4-喹啉酸、苯-1,4-双(咪唑基-1-甲基)和乙酸钴在二甲基甲酰胺和水的混合溶剂中反应,得到配合物[Co(pqba)2(biyb)](1)(Hpqba=2-苯基-4-喹啉酸,biyb=苯-1,4-双(咪唑基-1-甲基))。采用元素分析、红外光谱、X单晶衍射结构分析、热重分析等方法对配合物进行了表征和结构测定。配合物1属单斜晶系,C2/c空间群。配合物1中的biyb配体采用双齿桥链模式连接金属钴离子首先形成一维"之"字链,通过π…π堆积作用,进一步拓展为二维超分子结构。循环伏安法测试结果说明配合物1的电解过程为准可逆过程。磁化率测量表明,配合物1具有反铁磁性质。