Polymer Networks: From Plastics and Gels to Porous Frameworks

Polymer networks, which are materials composed of many smaller components—referred to as “junctions” and “strands”—connected together via covalent or non‐covalent/supramolecular interactions, are arguably the most versatile, widely studied, broadly used, and important materials known. From the first commercial polymers through the plastics revolution of the 20^th century to today, there are almost no aspects of modern life that are not impacted by polymer networks. Nevertheless, there are still many challenges that must be addressed to enable a complete understanding of these materials and facilitate their development for emerging applications ranging from sustainability and energy harvesting/storage to tissue engineering and additive manufacturing. Here, we provide a unifying overview of the fundamentals of polymer network synthesis, structure, and properties, tying together recent trends in the field that are not always associated with classical polymer networks, such as the advent of crystalline “framework” materials. We also highlight recent advances in using molecular design and control of topology to showcase how a deep understanding of structure–property relationships can lead to advanced networks with exceptional properties.     

A Dual‐Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single‐ligand‐based electronically conductive porous coordination polymers/metal–organic frameworks (EC‐PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π‐conjugated EC‐MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene, THQ=tetrahydroxy‐1,4‐quinone). The modulated conductivity (σ≈2.53×10^?5 S cm^?1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g^?1) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

Imparting Multifunctionality by Utilizing Biporosity in a Zirconium‐Based Metal–Organic Framework

In this work, we have synthesized nanocomposites made up of a metal–organic framework (MOF) and conducting polymers by polymerization of specialty monomers such as pyrrole (Py) and 3,4‐ethylenedioxythiophene (EDOT) in the voids of a stable and biporous Zr‐based MOF ( UiO‐66 ). FTIR and Raman data confirmed the presence of polypyrrole ( PPy ) and poly3,4‐ethylenedioxythiophene ( PEDOT ) in UiO‐66‐PPy and UiO‐66‐PEDOT nanocomposites, respectively, and PXRD data revealed successful retention of the structure of the MOF. HRTEM images showed successful incorporation of polymer fibers inside the voids of the framework. Owing to the intrinsic biporosity of UiO‐66 , polymer chains were observed to selectively occupy only one of the voids. This resulted in a remarkable enhancement (million‐fold) of the electrical conductivity while the nanocomposites retain 60–70 % of the porosity of the original MOF. These semiconducting yet significantly porous MOF nanocomposite systems exhibited ultralow thermal conductivity. Enhanced electrical conductivity with lowered thermal conductivity could qualify such MOF nanocomposites for thermoelectric applications.     

Unpaired 3d Electrons on Atomically Dispersed Cobalt Centres in Coordination Polymers Regulate both Oxygen Reduction Reaction (ORR) Activity and Selectivity for Use in Zinc–Air Batteries

Reversible oxygen conversion is important for various green energy technologies. Herein we synthesize a series of bimetallic coordination polymers by varying the Ni/Co ratio and using HITP (HITP=2,3,6,7,10,11‐hexaiminotriphenylene) as the ligand, to interrogate the role of metal centres in modulating the activity of the oxygen reduction reaction (ORR). Co₃HITP₂ and Ni₃HITP₂ are compared. Unpaired 3d electrons in Co₃HITP₂ result in less coplanarity but more radical character. Thus, despite of a reduced crystallinity and conductivity, the best ORR activity, comparable to 20 % Pt/C, is obtained for Co₃HITP₂, showing the 3d orbital configuration of the metal centre promotes ORR. Experimental and DFT studies show a transition of ORR pathway from four‐electron for Co₃HITP₂ to two‐electron for Ni₃HITP₂. Rechargeable zinc–air batteries using Co₃HITP₂ as the air cathode catalyst demonstrate excellent energy efficiency and stability.     

Controlling the Microstructure of Conjugated Polymers in High‐Mobility Monolayer Transistors via the Dissolution Temperature

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (T_dis) is investigated as a powerful strategy for morphology control. Low T_dis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π–π stacking. The field‐effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high T_dis with a value approaching 1 cm² V^?1 s^?1. Besides that, the solution kinetics reveal a higher growth rate of aggregates at low T_dis, and filtration experiments further confirm that the dependence of the fibril width in monolayers on T_dis is consistent with the aggregate size in solution. The generalizability of the T_dis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high‐mobility monolayer transistors.     

Bridging Small Molecules to Conjugated Polymers: Efficient Thermally Activated Delayed Fluorescence with a Methyl‐Substituted Phenylene Linker

Based on a “TADF + Linker” strategy (TADF=thermally activated delayed fluorescence), demonstrated here is the successful construction of conjugated polymers that allow highly efficient delayed fluorescence. Small molecular TADF blocks are linked together using a methyl‐substituted phenylene linker to form polymers. With the growing number of methyl groups on the phenylene, the energy level of the local excited triplet state (³LE_b) from the delocalized polymer backbone gradually increases, and finally surpasses the charge‐transfer triplet state (³CT). As a result, the diminished delayed fluorescence can be recovered for the tetramethyl phenylene containing polymer, revealing a record‐high external quantum efficiency (EQE) of 23.5 % (68.8 cd A^?1, 60.0 lm W^?1) and Commission Internationale de l′Eclairage (CIE) coordinates of (0.25, 0.52). Combined with an orange‐red TADF emitter, a bright white electroluminescence is also obtained with a peak EQE of 20.9 % (61.1 cd A^?1, 56.4 lm W^?1) and CIE coordinates of (0.36, 0.51).     

共轭聚合物发光和光伏材料研究进展

聚合物光电功能材料与器件因其广阔的应用前景,1990年以年来吸引了世界各国学术界的广泛关注和兴趣.聚合物光电子器件主要包括聚合物电致发光二极管、聚合物场效应晶体管和聚合物太阳能电池等,其使用的关键材料是共轭聚合物光电子材料,包括共轭聚合物发光材料、场效应晶体管材料和光伏材料等.本文主要对共轭聚合物电致发光材料和光伏材料的研究进展进行综述,介绍了这些聚合物材料的种类、结构和性质以及在聚合物电致发光器件和聚合物太阳能电池中的应用.并讨论了当前共轭聚合物光电子材料中的关键科学问题和今后的发展方向.     

THERMOSENSITIVITY OF NARROW-DISPERSED POLY(N-n-PROPYLACRYLAMIDE) PREPARED BY ATOM TRANSFER RADICAL POLYMERIZATION

Controlled polymerization of N-n-propylacrylamide was achieved by atom transfer radical polymerization(ATRP) in a N,N-dimethylformamide-water mixture(50 vol%)at room temperature with methyl 2-chloropropinonate as initiator and CuCl/tris(2-dimethylaminoethyl)amine as the catalytic system in a ratio of 1:1:1.High molecular weight homopolymers(up to 3.7×10~4)with narrow molecular weight distribution(less than 1.2)were obtained.The living character of the polymerization was further demonstrated by self-block...     

两亲性树状聚合物*

树状聚合物及其功能化是近年来高分子科学界的研究热点之一。本文综述了不同类型的树状聚合物,分别有聚酯、聚丙三醇、聚乙烯亚胺等超支化聚合物,聚酰胺-胺、聚丙烯亚胺等树枝状聚合物。通过对树状聚合物末端大量官能团的亲水（亲油）改性可以制备两亲性树状聚合物,改性方法主要有酰胺化反应、酯化反应、麦克尔加成反应等。与通过缩聚反应所得到的上述树状聚合物不同,近年来配位聚合领域出现的通过“链行走”机理形成的树状聚乙烯,引起了高度关注,这方面着重介绍了乙烯与极性单体直接共聚合或者采用链行走与原子转移自由基聚合联用制备两亲性树状乙烯聚合物。最后对两亲性树状聚合物领域的发展前景进行了展望。     

聚合物材料中六价铬萃取方法研究

本研究作为起草国际电工委员会标准IEC 62321, Ed.1的第3次国际实验室间比对实验的一部分,考察了用碱溶液对聚合物样品中六价铬进行萃取时样品的基体材料、粒径和萃取时间对萃取效率的影响.研究选取了3种不同粒径 (<125 μm,125～250 μm和250～500 μm) 的ABS、PVC和EVA/PE样品.用50 mL 0.5 mol/L NaOH-0.28 mol/L Na2CO3混合碱性消解液在90～95 ℃下萃取样品中的六价铬,并在1～6 h内逐渐增加萃取时间.测试结果表明:聚合物中六价铬的萃取率明显地受到样品基体材料的影响,PVC材料有很好的萃取效果,ABS中的六价铬也能被有效萃取出;而EVA/PE材料中的六价铬则几乎不能被萃取.对PVC和ABS,3 h的萃取时间基本能达到最大萃取率,而样品粒径在减小至＜250 μm后,萃取率会明显提高.