DIFFUSION OF LONG CHAINS THROUGH A POROUS THIN GEL NETWORK

Using a core(142 nm)made of linear polystyrene(PS)chains as a seed,we further polymerized a thin layer of cross-linked PS shell(7 nm)on it in water to form a core-shell particle.Such a particle swells in toluene,which enables linear PS chains inside the core to gradually diffuse out through the porous shell.Using a combination of static and dynamic laser light scattering,we examined the chain diffusion process by following the change of the scattering intensity(i.e.the average molar mass of the particles).For the first time,we have revealed that the diffusion exhibits three stages.In the first stage,the chain diffusion through the shell is even faster than their translational diffusion in a dilute solution.The three stages respectively correspond to the change of the solution in the core from concentrated to semidilute and then from semidilute to dilute.     

High speed liquid chromatography with small bore columns

Using a specially designed column system, we have systematically investigated the effect of mobile phase velocity on column efficiency. The performance of small bore columns operated at different linear velocities of mobile phase was examined for three different types of injection system. Using the value of H^∞/u or n^∞/t${}_{\text{r}}^{\text{º}}$ as a criterion of a high speed separation, we calculated values of n/t${}_{\text{r}}^{\text{º}}$ for different solutes according to the equation \documentclass{article}\pagestyle{empty}\begin{document}$ {{\rm n}\mathord{\left/ {\vphantom {{\rm n} {{\rm t}_{\rm r}^ \circ }}}\right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }} = {{{\rm n}^\infty } \mathord{\left/ {\vphantom {{{\rm n}^\infty } {{\rm t}_{\rm r}^ \circ }}} \right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }}\left({\frac{{1 + {\rm k'}}}{{{\rm k' + }\beta }}} \right)^2 $\end{document}; the results obtained are in agreement with the experimentally determined values. These systematic investigations culminated in the separation of seven compounds in less than 10 s; the respective chromatogram is shown.     

ZnHZSM-5上丙烷芳构化的研究-丙烷的活化

研究了HZSM－5、ZnHZSM－5和ZnNaZSM－5上的羟基振动光谱和一氧化碳吸附的红外光谱，以及丙烷的芳构化反应．红外光谱中发现表征强B酸的3610cm－1羟基振动峰相对强度由于锌离子的引入和浸渍氢氧化钠而减小，说明了锌离子和钠离子均进入了分子筛的阳离子位；一氧化碳在锌离子上的吸附峰位在2232cm－1，说明进入阳离子位的锌离子是一种强L酸．反应结果表明，锌离子的引入大大地促进了丙烷的转化和芳烃选择性的提高；在一定范围内，随浸渍氢氧化钠量的增加，丙烷转化率下降，而丙烯的选择性和产率增加，说明了锌组份直接参与了丙烷的脱氢过程．Zn－L酸是丙烷活化脱氢的中心，丙烷在该中心上异裂活化直接脱氢．     

CO在铜基催化剂上活化及助催剂作用本质的量子化学研究

提出了CO在助促和非助促的铜基催化剂上吸附活化的两种活性中心原子族模型Cu_5和Cu_4M~(n+)O。应用电荷自洽离散变分X_a近似计算方法对CO在这两种模型上活化本质,并对过渡金属助催剂离子M~(n+)(从ⅣA—ⅧA族中各选一个V~(3+),Ti~(3+),Fe~(3+),Mn~(2+),Mo~(4+))与合成甲醇铜基催化剂上金属铜原子相互作用的本质及其对CO活化的效应进行量子化学研究。计算表明CO是以碳端吸附在活性中心模型Cu_4M~(n+)O中的Cu(1)原子上,并向助催剂M~(n+)离子倾斜45°。从吸附态CO—Cu_5和CO—Cu_4M~(n+)O的原子簇轨道,态密度以及C—O间重选集居数的计算结果指出,CO分子受到活化。助催剂与催化剂中铜原子间相互作用影响了铜原子的价态,改变体系E_f能级,改善了前线轨道HOMO与CO 2π~*轨道的匹配,从而增加d电子的反馈,降低CO间的重选集居数,促进了CO的活化。     

神经网络的函数逼近能力分析

本文综述了多层前传网络（ＭＬＰ）及径向基函数网络（ＲＢＦ）对函数任意精度逼近的能力，比较了两种网络的最佳逼近特性。对激活函数类的扩充作了介绍，并说明有限数值精度对函数逼近能力实现的影响。     

THERMAL NEUTRON ACTIVATION ANALYSIS—AN IMPORTANT ANALYTICAL TOOL

ABSTRACT

This review is intended to present an introduction to the use of thermal neutron activation analysis (TNAA) as an analytical technique for the determination of elements in almost all kinds of matrices. This method of analysis is generally multi-element and experimental conditions can be designed to be nondestructive to the sample. This review will focus on thermal neutron activation as this technique allows determination of approximately two-thirds of the elements on the periodic chart. There are also more and wider spread facilities in the United States that offer these services. The available facilities are located across the United States and are generally accessible to everyone. The review will also detail the advantages and disadvantages of TNAA compared to other common spectroscopic methods. An outline of the general procedure for performing the analysis of the elements using activation analysis is presented to emphasize the ease of using this technique. The outline is divided into sections that give the general procedure, how to choose the correct nuclear reaction and reaction product, and the main sources of errors that can affect the results of the study. These sources of error are subdivided into general types of errors. The general types of errors are divided into those related to pre-chemistry, problems associated with the irradiation of the samples, errors associated with the use of nuclear constants (cross sections, half-lives, transition probabilities, etc.), the choice of the correct reaction and reaction product, and those associated with the counting of the irradiated samples. The general theory of activation analysis is presented and summarizes the derivation of the equations used and the development of the comparator method of analysis. The comparator method is used to simplify the method by irradiating samples along with standards. This reduces the need for using the nuclear constants and thus reducing errors. The use of radiochemical separations to isolate analytes of choice from the radioactive matrix is also described. Some current literature is also included to give a feel for current applications of the use of thermal neutron activation analyses. The summary also describes some of the different matrices that have been used for analyses.     

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.     

Modelling and simulation of gas dynamics in an exhaust pipe

The gas dynamics in an exhaust pipe is studied. In particular we focus on the warm up of the catalytic converter in very short times after the engine start. This is done by combustion a small unburnt part of the exhaust gas. This process is classically modelled by gas dynamic equations. Compared to the existing literature we improve the (one-dimensional) modelling approach using a small Mach number technique and a network ansatz for the full exhaust pipe. The final simplified model on one hand still describes the main features and on the other hand it is computationally a few orders of magnitude faster than the original model. Performing numerical simulations we compare the new model to the (classical) full model and to experimental results in the literature.     

Investigation on slot-die coating of hybrid material structure for OLED lightings

With an attempt to fabricate large-area OLED lighting panels, we investigate slot-die coating of a small molecule (SM) hole transport layer (HTL). It is observed that SM HTL films formed by spin coating exhibit pinhole-like surface, whereas the films by slot-die coating show micro-sized hillocks due to agglomeration. As the plate temperature of the slot coater is increased, smaller hillocks appear more densely. To tackle it, a small amount of a polymer HTL is added into the SM HTL (Hybrid HTL). By the aid of entangled polymer chains, small molecules are prohibited from migrating and thus agglomerations disappear. The peak-to-peak roughness of the slot-coated hybrid HTL films is measured to be about 11.5 nm, which is slightly higher than that (~7 nm) of the polymer HTL film, but much lower than that (~1071 nm) of the SM HTL film. Similar results are also observed in spin-coated films. It is also addressed that OLED with the hybrid HTL shows higher luminous efficacy, compared to OLED with the SM HTL or the polymer HTL. We have further demonstrated that the dissolution problem occurring between two stacked layers with different solvents during slot-die coating can be suppressed to a great extent using such a combination of materials in hybrid structure.     

Defect-related relaxation processes in irradiated rare gas solids

Electronic and atomic relaxation processes in preirradiated solid Ar doped with N 2 were studied with a focus on the role of radiative electronic transitions in relaxation cascades. Combining methods of activation spectroscopy - thermally stimulated and photon-stimulated exoelectron emission, a new channel of relaxation induced by photon emission from metastable N atoms was detected. It was shown that in insulating materials with a wide conduction band photons of visible range can release electrons from both kinds of traps - shallow (lattice defects) and deep thermally disconnected ones. Correlation in the charge recombination reaction yield and the yield of low temperature desorption - important relaxation channel in a preirradiated solid - clearly demonstrates interconnection between atomic and electronic processes of relaxation.