The effects of ultrasound frequency and power on the activation energy in Si-KOH reaction system

The activation energy is the minimum amount of energy required to initiate a reaction. It is one of the important indexes for appraising a reaction. The chemical reaction rate is closely related to the value of activation energy, and reducing activation energy is propitious to promoting a chemical reaction. In the present paper, the relationship between the activation energy in Si-KOH reaction system and the ultrasound frequency and power has been discussed for the first time. The range of ultrasound frequency and power is 40-100kHz （interval by 20kHz） and 10-50W （interval by 10W）, respectively. The experimental clata indicate that the activation energy decreases with the increasing ultrasound power. Comparing with the activation energy without ultrasound irradiation, the results in our paper indicate that ultrasound irradiation could reduce the activation energy in Si-KOH reaction system and increase the reaction rate.     

碱活化多孔碳用于分离甲苯及活化/吸附机理

采用生物质木质素磺酸钠(SLS)为碳源, 先与硬模板NaCl混合预碳化, 再加入活化剂NaOH在氮气保护下升温至850 ℃碳化, 得到SLS基碱活化的多孔碳吸附剂(SPCN). 将SPCN用于吸附液体石蜡中芳香烃甲苯, 对比研究了不同活化剂加入量对SPCN结构、 性质及吸附效果的影响. 结果表明, SPCN表面具有丰富的官能团和发达的微/介孔结构, 活化剂加入量对比表面积的影响为先增大后减小, 碱/碳质量比为1∶1时比表面积达到最大值(710.4 m ²/g); 吸附量与比表面积呈正相关, 样品SPCN-1的最大吸附量为2875.17 mg/g, 远高于商业吸附剂, 经5次吸附-解吸循环后仍保持92.5%的吸附效率. 探究了活化机理, NaOH、 碳质和气体发生氧化还原反应释放气体留下孔隙, 经充分酸洗、 水洗后得到永久孔道. 最后, 结合扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱(Raman)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)和比表面积分析等结果证明了吸附机理主要是孔隙填充效应、 范德华力、 π-π相互作用及电子供/受体作用的共同作用. 首次报道了SPCN应用的新方向并探究了活化与吸附机理, 制备方法简易、 经济, 产品循环稳定性好、 无污染, 有望用于工业化生产.     

Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

石墨相氮化碳可见光下活化过一硫酸盐氧化降解光惰性邻苯二甲酸二甲酯的机理研究（英文）

近几年过一硫酸盐(PMS)活化技术备受关注,其中利用太阳能活化PMS具有可持续和环保的优势,但PMS本身不吸收可见光.因此,本文提出利用具有可见光响应的石墨相氮化碳(g-C3N4)激发产生光电子进而活化PMS.首先利用三聚氰胺前驱体通过热缩聚法制备g-C3N4,通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见光漫反射(UV-Vis)、荧光光谱(PL)、透射电镜(TEM)、N2吸附脱附测试(BET)、电化学等一系列方法对g-C3N4进行表征,研究其表面性质及光学性能.结果显示, g-C3N4具有典型的片层结构和可见光活性,禁带宽度为2.7 e V.本文选取光惰性的内分泌干扰物邻苯二甲酸二甲酯(DMP)为目标污染物,系统地研究了其降解动力学和降解机理.研究发现,在短波紫外光(254和300nm)照射下,直接光解和·OH参与的反应机理能实现DMP的光降解,而在可见光照射下g-C3N4介导的光催化过程不能使DMP分解;但当添加PMS时,体系主导自由基由·O2–转化为SO4·–和·OH,从而实现DMP的有效降解和矿化.研究还发现,高浓度的PMS和高剂量的g-C3N4均可以提高PMS的活化量和相应的DMP降解效率,但提高催化剂剂量的方式能更充分的利用PMS.尽管高浓度的DMP阻碍了PMS和光催化剂g-C3N4的有效接触,但可以提高PMS的利用率.当p H低于零电荷点(5.4)时, DMP的降解效率较高.此外,使用两种淬灭剂(乙醇和叔丁醇)与DMP进行竞争性实验,结合电子自旋共振检测,表明SO4·–和·OH都是体系主要的自由基.此外,还对g-C3N4的可持续性能进行考察,四次循环实验结果显示,该催化剂具有良好的可重复利用性.对DMP降解进行总有机碳测定,发现降低了19%.最后,利用液相色谱质谱联用对DMP降解产物进行定性定量分析,发现DMP主要通过SO4·–和·OH对苯环的攻击以及脂肪族链的氧化断键这两种途径进行降解.综上可见,利用可见光激发g-C3N4产生的光电子能有效活化PMS降解顽固型有机污染物,可为实现太阳能活化PMS技术提供有力的技术参考.     

Immunosensor for Detection of the Textile Dye Disperse Orange 1 Based on Non‐conventional Competitive Assay

Textile dyes appear as an important class of compounds that has become a matter of public concern and a serious challenge for scientists and environmentalists due to their large‐scale production and extensive application. In this work, a non‐conventional competitive‐type amperometric immunosensor was successfully developed for detection of the textile dye Disperse Orange 1 (DO1). The DO1 was magnetically captured and separated from the sample solution using magnetic particles (MP) functionalized with the antibody anti‐DO1 and with HRP and gold electrodes were modified with the conjugate DO1‐BSA. Molecules of DO1 immobilized on the electrode surface and DO1 captured by MP compete for antibody binding sites. As a result, the amperometric signal decreases with increasing target DO1 concentration at the capture step, because this decreases, the attachment between the HRP coated MP and the electrode. This strategy allowed us to determine DO1 at the low detection limit of 0.87 ng mL^?1 with great specificity. Also, there were good recoveries for detection of the textile dye in river water samples without the need of sample pre‐treatment. The competitive amperometric immunosensor shows applicability for the determination of small molecules that cannot be determined by conventional competitive or sandwich immunosensors.     

SiO2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

红外运动小目标的检测

通过分析天空背景下红外运动小目标、噪音以及背景的特征,提出一种检测方法·首先利用向量小波变换对运动图像进行预处理;其次采用图像差分进行目标的粗检测,提取出候选目标;最后可根据运动目标和噪音的特征对候选目标进行识别,检测出真实的运动小目标·实验证明,该方法可有效检测天空背景下红外运动小目标·     

吲唑、3-卤代吲唑互变异构反应机理的理论研究

The molecular structures of indazole and 3-halogeno-indazole tautomers were calculated by the B3LYP method at the 6-311G** level, both in the gaseous and aqueous phases, with full geometry optimization.The geometry and electronic structure of the tautomers of indazole, 3-halogeno-indazole and their transition states were obtained. The Onsager solvate theory model was employed for the aqueous solution calculations.The results of the calculation indicated that the N1-H form of the studied molecule is more stable than that of the N2-H form. The influences of the different 3-halogeno and solvent effects on the geometry, energy,charge and activation energy were discussed. The reaction mechanism of the tautomerization of indazole and 3-halogeno-indazole was also studied and a three-membered cyclic transition state of the tautomer reaction has been obtained.     

活化条件对活性碳纳米管比表面积的影响

以KOH为活化剂, 研究了多壁碳纳米管在制备活性碳纳米管过程中四个重要影响因素: 活化剂用量、活化温度、活化时间和活化过程中保护气体的流速对所得活性碳纳米管BET比表面积的影响并解释了原因. 研究表明上述四个因素都会对活性碳纳米管的比表面积产生较大的影响, 其中活化剂用量的影响最大, 在研究范围内可引起比表面积增大约241 m²•g^-1. 在这四个影响因素中除活性碳纳米管的比表面积随活化温度的增加而不断增加外, 其他三个影响因素的变化都会使活性碳纳米管的比表面积出现最大值, 而且四个影响因素的改变, 都不改变活性碳纳米管的孔洞主要是中孔和大孔的特点.     

四氯化锆四元催化体系中乙烯齐聚反应的动力学研究

研究了四氧化锆作主催化剂的四元催化体系中，乙烯压力、催化剂浓度和温度对乙烯齐聚反应的影响．测定了稳定态下乙烯齐聚反应的宏观动力学方程和表观活化能．