Simplified chemical and radiochemical synthesis of 2-arachidonoyl-glycerol, an endogenous ligand of cannabinoid receptors

Endocannabinoids have emerged as a new class of lipid mediators, with manifold roles in the central nervous system and in the periphery. Several studies have identified 2-arachidonoyl-glycerol (2-AG) as a major endogenous agonist of cannabinoid receptors. Here, the chemical synthesis of 2-AG is reported, along with the synthesis of its tritium-labeled derivative. These unlabeled and radiolabeled compounds are suitable tools for unravelling some metabolic routes and biological activities of 2-AG in various cells and tissues.     

无保护流体室温燐光法测定吲哚-3-丁酸的研究

在仅以碘化钾为重原子微扰剂、亚硫酸钠为除氧剂及无任何保护性介质存在的水溶液中 ,吲哚_3_丁酸 (IBA)能发射很强的室温光 (RTP) ;详细研究了分析测定条件及有机溶剂对RTP的影响 ;在最大光波长λex/λem =281/447nm处 ,光强度与IBA浓度在2.0×10 -7～1.0×10 -5mol/L范围内呈良好的线性关系 ,检出限4.3×10-8 mol/L ;方法直接用于强化水样和土壤中IBA的测定 ,回收率96 %～104 % ,相对标准偏差2.37 %～3.97 %。     

In Situ IR Spectroscopic Studies on Molybdenum Nitride Catalysts: Active Sites and Surface Reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo₂N/-Al₂O₃ catalyst are presented in this paper. The surface sites of fresh Mo₂N/-Al₂O₃, both Mo⁺ (0<<2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm^-1, due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo₂N/-Al₂O₃ behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo₂N/-Al₂O₃ catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo₂N/-Al₂O₃ catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.     

27Al和29Si MAS-NMR对Mo/HZSM-5催化剂的研究

使用＾２９Ａｌ固体离分辨核磁技术对甲烷无氧芳构化催化剂Ｍｏ／ＨＺＳＭ－５分子筛进行了研究，发现ＨＺＳＭ－５分子筛本体中仅含有少量非骨架Ａｌ，Ｍｏ物种与分子筛骨架Ａｌ的相互作用随Ｍｏ担载量以及焙烧的温度的升高而增加，在高温焙烧下，Ｍｏ物种会使分子筛骨架严重脱铝，并且生成Ａｌ２（ＭｏＯ４）３新相，最终导致分子筛骨架塌陷，催化性能下降。     

超球谐展开的收敛行为He原子的^3S态

利用相关函数－超球谐－广义Ｌａｇｕｅｒｒｅ函数方法，研究Ｈｅ原子＾３Ｓ态波函数向超球谐函数展开的收敛行为。截止于ｌ＝０，１，２的超球谐函数给出的本征能分别与组态相互作用的ｓ－，ｓｐ－，ｓｐｄ－极限能一致。仅用４４个超球谐函数，便得到了与精确的ＨｙｌｌｅｒａａｓＣＩ变分能量小数点后第５位的２＾３Ｓ，３＾３Ｓ的４＾３Ｓ态本征能吻合。     

(CH3)2SBr2 – einige Reaktionen und Strukturen

(CH₃)₂SBr₂ – Reactions and Structures (CH₃)₂SBr₂ ( 1 ) is a donor acceptor complex (8-S-3 + 10-Br-2) which reacts with (CH₃)₂S(?O)NSi(CH₃)₃ to yield [(CH₃)₂S(O)?N? S(CH₃)₂]⁺Br^? ( 2 ). With SbBr₃ (CH₃)₂SBr⁺SbBr₄^? ( 3 ) can be isolated. 1 crystallizes monoclinic in the space group P2₁/c with a = 733.8, b = 734.2, c = 1132.7 pm, β = 92.8° and Z = 4. 2 crystallizes in the orthorhombic space group Pnma with a = 967.2, b = 793.3, c = 1168.3 pm and Z = 4. The SBr and BrBr force constants of 1 are compared with those of S₂Br₂, 3 and Br₂ resp. The nmr and mass spectra of 1 and 2 are communicated.     

Modification of polybenzimidazole: Synthesis and thermal stability of poly(N1-methylbenzimidazole) and poly(N1,N3-dimethylbenzimidazolium) salt

Poly(N₁,N₃-dimethylbenzimidazolium) (PDMBI) salt and poly(N₁-methylbenzimidazole) (PMMBI) were synthesized by methylation of commercial polybenzimidazole [poly-2,2′-(m-phenylene)-5,5′-bibenzimidazole (PBI)]. First, the N-lithium salt of polybenzimidazole was formed by treating polybenzimidazole solution of 1-methyl-2-pyrolidinone (NMP) with lithium hydride at 80°C for 18 h. Ninety percent substitution of PMMBI was obtained by treating the N-lithium salt of PBI with equimolar ratio of iodomethane at room temperature. Upon addition of excess iodomethane to the lithium salt of PBI at 80°C, a polymer was formed that showed 100% substitution on the N₁ nitrogen and about 30% substitution of the methyl group on the N₃ nitrogen in the form of N₁,N₃-dimethylbenzimidazolium iodide salt [PDMBI (30%)]. The content of the benzimidazolium iodide salt was increased to about 90% by dissolving PDMBI (30%) in dimethyl sulfoxide (DMSO) and re-treating with excess iodomethane at 80°C overnight. The modified PBI polymers were characterized by NMR and FTIR. The modified PBI differed in solubility from PBI. PMMBI could be easily dissolved in NMP and PDMBI in DMSO at room temperature. The solution of PDMBI could be mixed with water in all proportions without precipitation. PDMBI could be also dissolved directly in a mixture of DMSO and water (1 : 1). Typical polyelectrolyte behavior of viscosity was found in solution of PDMBI (30%) and PDMBI (90%) when DMSO and a mixture of DMSO and water were used as solvents. A salt effect on viscosity was also found in the mixed solvent solution. Thermogravimetric analysis (TGA) showed that the methyl group on the imidazole ring was unstable above 180°C under nitrogen. When PDMBI was heated under nitrogen, one of the methyl groups was lost with the counterion to result in a neutral PMMBI. © 1993 John Wiley & Sons, Inc.     

铀-2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚-Triton X-100析相体系的研究及应用

本文研究了铀-2-(3,5-二溴-2-吡啶偶氨)-5-二乙氨基苯酚(3,5-diBr-PADAP)-Triton X-100析相光度体系,建立了矿石中微量铀的测定方法,在pH 7.5三乙醇胺-盐酸介质中,将胶束溶液在 95±1℃加热 1h.络合物即被Triton X-100相完全富集.络合物最大吸收峰位于565nm.摩尔吸光系数为1.02×10～5L·mol～(-1)·cm～(-1),铀含量在0～12μg/5mL服从比耳定律.采用TBP萃淋树脂分离干扰离子,测定矿石中微量铀,结果满意.     

Determination of 3-sulfolene in sulfolane by reaction gas chromatography

Summary A simple gas-liquid chromatographic method has been developed for determining 3-sulfolene in sulfolane. The method involves thermal decomposition of sulfolene and determination of the 1.3-butadiene evolved, by GLC. Influence of the operating parameters on quantitative decomposition of sulfolene has been studied. The accuracy of the method as studied in the concentration range from 0.05 to 4.0 % (w/v) of 3-sulfolene in sulfolane is found to be within ±3.0%. It is rapid and sensitive down to 10 ppm and has potentialities for on-line applications also.

---

Bestimmung von 3-Sulfolen in Sulfolan durch Reaktions-Gas-Chromatographie

Zusammenfassung Eine einfache gas-chromatographische Methode wurde entwickelt, die auf der thermischen Zersetzung der Probe und der Bestimmung des dabei aus 3-Sulfolen gebildeten 1,3-Butadiens beruht. Der Einfluß der einzelnen Parameter wurde untersucht. Innerhalb eines Konzentrationsbereichs von 0,05–4,0% 3-Sulfolen ergaben sich Fehler von ±3%. Das Verfahren ermöglicht bis herab zu 10 ppm eine schnelle und empfindliche Bestimmung und eignet sich auch zum on-line Betrieb.

     

Zum chemischen Transport von Molybdän mit SbBr3 – Experimente und Modellrechnungen

On the Chemical Transport of Molybdenum using SbBr₃ – Experiments and Thermochemical Calculations Mo migrates in a temperature gradient from the region of higher temperature to the lower temperature using SbBr₃ as transport agent. For various mean transport temperatures (750 ? T ? 1000°C; T = 0,5 (T₁ + T₂); T₂ ? T₁ = 100°C) we observed small transport rates (? ? 0,6 mg/h) which rise up to 16 mg/h for higher transport agent concentrations. Small amounts of MoO₂ and Sb were detected beside Mo in the sink. The observed solid phases in the sink are in agreement with thermodynamical calculations by CVTrans which also demonstrate that the formation of MoO₂ and Sb as well as the transport effect of SbBr₃ are caused by traces of H₂O from the quartz glass wall. The sequence of deposition of Mo, MoO₂ and Sb in the examined temperature range can be calculated (CVTrans) and measured with the transport balance.