磁电弹性体中多条位错与Griffith裂纹

根据本征方程，研究磁电弹性体中若干平行螺型位错与Griffith裂纹的相互作用.结合Muskhelishvili方法和算子理论，得到磁电弹性体中由位错和裂纹所诱导的应力场、电场和磁场的解析解.数值算例表明：在裂纹的端点及位错点上仍然存在应力的奇异性，离位错点越远处广义力越小，结论与已有的结果相符，证明了结论的正确性.当位错点与裂纹端点距离越近时，裂纹与位错间的应力场越小，并逐渐趋近于零.     

内爆驱动式超高速发射技术的初步研究

为获得10 km/s左右的超高速发射能力,以内爆发射器为研究对象,利用AUTODYN 2D软件对口径为8 mm的内爆发射器进行有限元仿真分析,获得了典型状态下的弹丸发射速度。研制了口径为8 mm的内爆发射器,并在压缩管中填充5 MPa氦气进行实验,分别获得了0.55 g铝合金弹丸7.95 km/s和0.37 g镁合金弹丸10.28 km/s的发射速度,与有限元仿真计算结果的速度偏差分别为15.3%和3.7%。结果表明,设计的内爆发射器具备10 km/s发射能力,满足空间碎片撞击和防护研究的超高速发射需求。     

半导体激光器的自混合散斑干涉测量流体速度

提出了一种简便的激光自混合散斑干涉测量流体速度的方法。根据散斑和法布里-珀罗腔的理论,提出了半导体激光器的自混合散斑干涉模型。研究了流体运动时在半导体激光器内产生的自混合散斑干涉效应(SMPI),给出了激光器输出增益的变化及其概率密度分布。得到了激光自混合散斑干涉平均频率与流体速度之间的关系。模拟计算和实验结果验证了这个关系。利用散斑干涉的平均频率与流体速度的关系测量了高分子材料溶液的速度,并在溶液浓度和背景光变化时,对流体速度进行了测量、比较和分析。实验表明。在溶液浓度不太低时,测量误差小于8％。     

高精度消色差相位延迟器的新设计

消色差相位延迟器是在某一宽度光谱范围内使用的光相位延迟器件。从相位延迟的全反射相变理论出发,对斜入射消色差相位延迟原理进行阐述,参考菲涅耳棱镜的具体设计形式,对引起相位延迟变化的参量进行分析,通过选择合适的材料新设计出了特殊角度入射的高精度相位延迟器,其理论曲线显示,在365~1150nm的光谱区域内延迟偏差小于0.4°,是常规相位延迟器在相同条件下的五分之一,是一种宽广谱范围内、负延迟偏差小、精度高的消色差相位延迟器。     

Synthese und Qualitätskontrolle 15N-markierter Stickoxide mit hoher 15N-Häufigkeit für umweltrelevante Tracer-Untersuchungen

Für die Untersuchung ausgewählter Probleme des Verhaltens und der Wirkung der Stickoxide NO _x (NO + NO₂) in Ökosystemen, z.B. die Aufnahme und Freisetzung von NOx durch das System “Boden-Pflanze”, bietet sich der Einsatz ¹⁵N-markierter Stickoxide an. Die dazu benötigten ¹⁵N-markierten Gasgemische hoher Reinheit werden aus eigens dafür synthetisiertem [¹⁵N]Stickstoffmonoxid oder [¹⁵N]Stickstoffdioxid mit hoher ¹⁵N-Häufigkeit hergestellt. Beide Synthesen gehen jeweils von der kostengünstig kommerziell erhältlichen [¹⁵N]Salpetersäure aus.

Im Falle des [¹⁵N]Stickstoffdioxids erfolgt die Herstellung über die Präparation von Bleinitrat und dessen thermische Zersetzung. Die Ausbeute liegt bei 70–75% bezogen auf eingesetzte [¹⁵N]Salpetersäure.

Die Herstellung von [¹⁵N]Stickstoffmonoxid erfolgt durch Reduktion von [¹⁵N]Salpetersäure mit Eisen-II-sulfat in stark saurer Lösung. Die Ausbeute beträgt 60–70%, bezogen auf eingesetzte Salpetersäure.

The application of ¹⁵N is very useful for the investigation of the behavior and the effect of the nitrogen oxides NO _x (nitric oxide + nitrogen dioxide) in ecosystems, e.g. the uptake and release of NO _x by the soil-plant system. The ¹⁵N labelled gas mixture needed for that purpose has to be prepared from synthesized highly enriched [¹⁵N]nitric oxide and [¹⁵N]nitrogen dioxide. These two syntheses both use the commercially available and reasonable [¹⁵N]nitric acid.

In the case of [¹⁵N]nitrogen dioxide the synthesis is carried out via [¹⁵N]lead nitrate and its decomposition with increasing temperature. The yield is 70–75% related to the [¹⁵N]nitric acid input. The preparation of [¹⁵N]nitric oxide is done by reduction of [¹⁵N]nitric acid by means of FeSO₄ in strong acid solution. The yield amounts to 60–70%.     

NO分子和氧原子的高分辨离子谱实验研究

共振增强多光子电离及飞行时间质谱技术是一种具有高分辨率、高灵敏度的光谱研究技术。利用上述技术研究了由激光光解NO2产物-NO与原子O的离子谱,获得了振转态高度分辨的NO(X^2П,v″,J″)γ(0,0)γ(0,1)γ(1,1)带的离子谱以及自旋-轨道精细能级分辨的氧原子O(2P^3PJ^″=2,1,0)离子谱。氧原子O(2P^3PJ^″=2→3P^3PJ^″、2P^3PJ^″=1→3P^3PJ′、2P^3PJ″=0→3P^3PJ′)的离子信号位于紫外电离探测激光的波长分别为225．65nm,226．04nm,226．23nm。实验表明,共振增强多光子电离加飞行时间技术研究原子、分子光谱其灵敏度与分辨率远高于常用的激光感生荧光方法。所得到的NO分子与氧原子的离子谱及它们的离子信号对NO2分子光解及NO分子与氧原子的电离动力学研究提供了有益的实验信息。     

Multipartite State Representations in Multi-mode Fock Space and Their Squeezing Transformations

We present the continuous state vector of the total coordinate of multi-partlcle and the state vector of their total momentum, respectively, which possess completeness relation in multi-mode Fock space by virtue of the integration within an order product （IWOP） technique. We also calculate the transition from classical transformation of variables in the states to quantum unitary operator, deduce a new multi-mode squeezing operator, and discuss its squeezing effect. In progress, it indicates that the IWOP technique provides a convenient way to construct new representation in quantum mechanics.     

A numerical study of the target system of an ADSS with different flow guides

The mechanical design of the target module of an accelerator driven subcritical nuclear reactor system (ADSS) calls for an analysis of the related thermal-hydraulic issues because of large amount of heat deposition in the spallation region during the course of nuclear interactions with the molten lead bismuth eutectic (LBE) target. The LBE also should carry the entire heat generated as a consequence of the spallation reaction. The problem of heat removal by the LBE is a challenging thermal-hydraulic issue. For this, one has to examine the flows of low Prandtl number fluids (LBE) in a complex ADSS geometry. In this study, the equations governing the laminar flow and thermal energy are solved numerically using the streamline upwind Petrov-Galerkin (SUPG) finite element (FE) method. The target systems with a straight and a nozzle guide have been considered. The principal purpose of the analysis is to trace the flow and temperature distribution and thereby to check the suitability of the flow guide in avoiding the recirculation or stagnation zones in the flow space that may lead to hot spots.      

A bidirectional hybrid DWDM-PON employing optical injection locking technique and data comparators

A bidirectional hybrid dense-wavelength-division-multiplexing (DWDM)-passive optical network (PON) employing optical injection locking technique on vertical-cavity surface-emitting lasers (VCSELs) and data comparator, as well as optical injection locking technique on distributed feedback laser diodes (DFB LDs) and amplitude/phase compensator is proposed and demonstrated. Improved performances of bit error rate (BER) and carrier-to-noise ratio/composite second order/composite triple beat (CNR/CSO/CTB) were observed in our proposed bidirectional hybrid DWDM-PON. Bidirectional transmission in bidirectional hybrid DWDM-PON architecture is a very attractive option, the capacity of the optical network can be expanded relatively easily by bidirectional transmission technology.     

模型飞行验证系统测控与信息传输技术研究

模型飞行验证系统是为更加有效地开展模型自由飞试验研究而设计的通用试验系统,测控(TT C)与信息传输系统是其信息保障的核心。本文在充分考虑模型自由飞试验特点的基础上,重点研究了模型飞行验证系统研制过程中的测控与信息传输技术,介绍了其工作原理及实现方法,并对部分结果进行分析。