Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

Multigrid Models of Composite Materials of Irregular Structure with a Small Filling Ratio

This paper considers composites consisting of a set of typical composite multigrid finite elements whose structures are regular and different. Mean local errors are proposed for multigrid modeling of composites.     

一个改进的平面梁单元

根据有限单元法基本原理 ,提出了一个变截面平面梁单元 ,推导了其单元钢度矩阵。这一改进的梁单元用于分析梁高呈线性变化及二次抛物线变化的矩形截面梁 ,将得到准确解。文中给出了一个变截面悬臂梁算例 ,计算表明 ,这一改进的梁单元使变截面梁的分析大大简化     

Dewar瓶内液体晃动的近似计算方法

本文研究Dewar瓶内液体的晃动特征问题，将液体晃动的微分方程边值问题转换为具有积分形式的泛函极值问题，在此基础上建立了旋转对称容器液体晃动特征问题的有限元数值计算方法和通用程序，并计算了Dewar球，球腔，圆柱腔液体的晃动固有频率，结果显示了Dewar瓶综合了球腔和圆柱腔液体晃动的特征，它将液体晃动频率控制在一窄带范围之内。利用该程序，本文又计算了Dewar瓶液体晃动的单摆模型，为了便于工程应用，本文提出了一种对Dewar瓶建立等效圆柱容器液体晃动模型的方法，给出了模型的参数变换公式，从而可以通过对圆柱窝器液体晃动的解析计算得到Dewar瓶的液体晃动结果。利用数值计算结果，本文验算了近似计算方法的有效性和近似程序。     

OBJECT-ORIENTED FINITE ELEMENT ANALYSIS AND PROGRAMMING IN VC++

ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅｆｉｎｉｔｅｅｌｅｍｅｎｔａｎａｌｙｓｉｓｐｒｏｇｒａｍｓｄｅａｌｗｉｔｈｔｈｅｔｈｅｏｒｉｅｓａｎｄｍｅｔｈｏｄｓｏｆｔｈｒｅｅｆｉｅｌｄｓｏｆｍｅｃｈａｎｉｃｓ,ａｐｐｌｉｅｄｍａｔｈｅｍａｔｉｃｓａｎｄｃｏｍｐｕｔｅｒｓｃｉｅｎｃｅ,ｔｈｅｙａｒｅｃｏｍｐｌｉｃａｔｅｄａｎｄｅｒｒｏｒ＿ｐｒｏｎｅ .Ｄｕｒｉｎｇｄｅｖｅｌｏｐｍｅｎｔｐｅｏｐｌｅａｌｌｔｈｒｏｕｇｈｓｅｅｋｔｈｅｍｅｔｈｏｄｔｏｉｍｐｒｏｖｅｐｒｏｇｒａｍｓ.Ｔｈｅｏｂｊｅｃｔ＿ｏｒｉｅｎｔｅ…     

弥散型核燃料元件热应力的计算模拟

针对弥散型燃料板的具体形状,选择了一种能够反映其实际变形特征的三维代表性体积单元作为研究对象;利用有限元法对其热力耦合行为进行了弹塑性分析,研究了热应力在燃料和基体中的分布特征.     

用迭代法模拟注塑成型的三维流动

Hele-Shaw模型是模拟注塑成型过程的常用模型,它的主要缺点是不能模拟一些重要的物理现象及引入实际制件中并不存在的“中面”概念,为了消除这些不足,本文开发了真三维的流动分析程序。建立了粘性、不可压缩的非牛顿流体流动的控制方程,为了避免同时求解耦合的压力场、速度场,本文引入拟稳定技术独立地求解这些方程,用迭代法求耦合方程的解。这种方法可以减少内存并提高数值方法的稳定性。算例表明数值结果与实验结果吻合较好,这种方法成功地模拟了注塑成型流动过程中的重要特征。     

On the bursting of linear polymer melts in inflation processes

Molten LLDPE and HDPE plates (thickness 2 mm) have been inflated into a circular cylinder (inner radius 31 mm) under isothermal conditions. Low deformation rates allow the plates to be inflated considerably into the cylinder, and at high inflation rates an early burst is observed.Axis-symmetric numerical simulation of the inflations have been performed, using a constitutive equation in the form of a separable memory integral where the strain dependence is described by the Linear Molecular Stress Function (L-MSF) model with dissipative convective constraint release. The material parameters in the constitutive model are obtained using liner viscoelastic (oscillatory shear) and uni-axial elongational measurements.The numerical simulations were performed for inflation of a flat plate and a perturbed plate, where a small circular cone was removed from the centre of the surface of the plate. This was done in order to investigate the stability of the inflations. It is shown that all of the inflations are hydrodynamically unstable, though the effect on the occurrence of the burst is limited. One exception is at slow inflation, where an unexpected burst may appear as a consequence of minute deviations from an ideal flat plate. All of the numerical calculations show quantitative agreement with the experiments for a wide range of experimental conditions. This strongly suggests that the initiation of the burst is a hydrodynamic phenomenon.The critical parameters in the inflation of molten linear polymers have been investigated using the Gel equation as a memory function (M(s)=Ans ^–(1+n)) and inflating the plate with a constant velocity for the top of the plate. The hydrodynamic burst in a linear polymer is mainly associated with the linear viscoelastic properties and only slightly with the non-linear strain dependence. Increased (linear) elasticity reduces the inflated volume, at the same inflation velocity, before the burst occurs. Furthermore, the critical parameter for the occurrence of the burst (whether or not the burst occurs) is related to the crossover point (G=G) in linear viscoelasticity.     

大型结构分析程序系统单元库更新

阐述了大型结构分析程序系统单元库更新的概念及其意义，报告了装入ＡＰ－１程序系统单元库的精化四节点及八节点平面等参元的情况，给出了更新前、后单元通过考题库测试的结果及与其它程序系统结果的比较。数值结果表明通过更新单元来提高程序系统的分析精度与计算效率从而增强其竞争力是可行的。     

中心集中力作用下圆薄板的固有频率—载荷特征关系

本文讨论了中心集中静载作用下圆薄板在非线性弯曲静平衡构形附近的微幅自由振动,其静平衡问题采用问题的精确解在此基础上,用伽辽金法获得了其最低固有频率——载荷特征关系.所得结果可供这类谐振弹性元件设计中参考.