钆(Ⅲ)-钙试剂络合物吸附波研究

在含有 0 .1 0 mol/L KCl,p H=1 0 .2的 NH3- NH4 Cl缓冲溶液中 ,用线性扫描示波极谱法测得 Gd( ) - Cal- red络合物有一灵敏的导数波 ,峰电位在 - 0 .84V,峰电流与钆 ( )的浓度在 1 .0× 1 0 - 7～ 5 .0× 1 0 - 6 mol/L范围内呈线性关系 ,检出限达1 .0× 1 0 - 7mol/L ;另外 ,试剂本身在 - 0 .61 V有导数极谱波 ,该波的峰电流随钆( )的浓度增加而降低 ,也具有一定的线性关系     

H, C, N NMR, ESI mass spectral and single crystal X-ray structural characterization of three spiro[pyrrolidine-2,3′-oxindoles]

Three spiro[pyrrolidine-2,3′-oxindoles], 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-phenyl-spiro[3H-indole-3,3′-[3H]-pyrrolizine]-2′-carboxylic acid methyl ester (1), 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-nitro-2′-phenyl-spiro[3H-indole-3, 3′-[3H]-pyrrolizine] (2) and 1,1′,2,2′,5′,6′,7′,7′a-octahydro-2-oxo-1′-nitro-2′-(4″-chlorophenyl)-spiro[3H-indole-3,3′-[3H]-pyrrolizine] (3) have been synthesized and their ¹H, ¹³C and ¹⁵N spectra assigned. The chemical shift assignments are based on Pulsed Field Gradient (PFG) Double Quantum Filter (DQF) ¹H, ¹H correlation spectroscopy (COSY), PFG ¹H, ¹³C Heteronuclear Multiple Quantum Coherence (HMQC) and PFG ¹H,X (X = ¹³C and ¹⁵N) Heteronuclear Multiple Bond Correlation (HMBC) experiments. The single crystal X-ray structures of 1–3 have been determined. Compounds 1 and 2 crystallized in monoclinic space group C2/c and compound 3 in monoclinic space group P2₁/c, respectively. Also the ESI-TOF MS data of 1–3 are given.     

[Mn(H_2O)_4(NCS)_2)(18C6)和(Co(H_2O)_4(NCS)_2)(18C6)单晶的培养及物性表征

用凝胶法和蒸发法分别培养出配合物[Mn(H_2O)_4(NCS)_2]18C6)和[Co(H_2O)_4(NCS)_2](18C6)的单晶。对两个配合物进行了溶解性能的测试、元素分析、电导测量、红外光谱分析、热分析和质谱分析。表征的指派为晶体结构分析结果所证实。 。。     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Determination of Dimethyl Sulfide in Gas Samples by Single Photon Ionization Time of Flight Mass Spectrometry

It is difficult to determine sulfur-containing volatile organic compounds in the atmosphere because of their reactivity. Primary off-line techniques may suffer losses of analytes during the transportation from field to laboratory and sample preparation. In this study, a novel method was developed to directly measure dimethyl sulfide at parts-per-billion concentration levels in the atmosphere using vacuum ultraviolet single photon ionization time-of-flight mass spectrometry. This technique offers continuous sampling at a response rate of one measurement per second, or cumulative measurements over longer time periods. Laboratory prepared samples of different concentrations of dimethyl sulfide in pure nitrogen gas were analyzed at several sampling frequencies. Good precision was achieved using sampling periods of at least 60 seconds with a relative standard deviation of less than 25%. The detection limit for dimethyl sulfide was below the 3 ppb olfactory threshold. These results demonstrate that single photon ionization time-of-flight mass spectrometry is a valuable tool for rapid, real-time measurements of sulfur-containing organic compounds in the air.     

Thermo-induced structural transformation with synergistic optical and magnetic changes in ytterbium and erbium complexes

Dinuclear ytterbium and erbium based bifunction complexes Ln₂L₂(depma₂)Cl₂ (1-Ln, Ln = Yb and Er, H₂L = N¹,N³-bis(salicylideneimino)diethylenetriamine, depma₂ = dimerized 9-diethyl-phosphonomethylanthracene) are reported. They undergo thermo-induced consecutive phase transitions, first the dissociation of depma₂ ligand forming LnL(depma)Cl (2-Ln) and then the release of chloroethane forming LnL(epma) (3-Ln, epma = 9-ethylphosphonomethylanthrancene). The structural transformations are accompanied with synergetic switch of the luminescence in visible and NIR regions and also magnetic dynamics.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

Single crystal synthesis and magnetism of the BaLn2O4 family (Ln = lanthanide)

The series of compounds in the BaLn₂O₄ family (Ln = La–Lu, Y) has been synthesized for the first time in single crystalline form, using a molten metal flux. The series crystallizes in the CaV₂O₄ structure type with primitive orthorhombic symmetry (space group Pnma, #62), and a complete structural study of atomic positions, bonds, angles, and distortions across the lanthanide series is presented. With the exception of the Y, La, Eu, and Lu members, magnetic susceptibility measurements were performed between 2 K and 300 K. BaCe₂O₄ and BaYb₂O₄ display large crystal fields effects and suppression of magnetic ordering. All compounds show signs of magnetic frustration due to the trigonal arrangements of the trivalent lanthanide cations in the structure.     

The formation of an oscillating system during the sputtering of sapphire single crystal with pulsed glow discharge

Sapphire (α-Al₂O₃, transparent corundum) single crystals were analyzed with pulsed direct current glow discharge mass spectrometry. Combined hollow cathode was used as a discharge cell. To obtain stable sputtering of dielectric material, a formation of initial surface conductivity via preliminary vacuum deposition of thin metallic layer was proposed. Al and Ta film of different thickness (30–200 nm) were considered for this purpose. The approach was found to provide the effective sputtering of dielectrics. The formation of an oscillating system was shown during the sputtering of sapphire samples in a tantalum combined hollow cathode cell. For oriented sapphire single crystals, periodic oscillations of ²⁷Al⁺ intensity were acquired. This phenomenon was observed only for dielectric single crystals and not for other dielectric samples, e.g. alumina ceramic or fused quartz. The linear dependence of oscillation period on the duration of discharge pulse was found. The origin of these oscillations seems to be attributed to periodic fluctuations of surface conductivity. Oscillation periods calculated for two different orientations of sapphire single crystals (001 and 012) were found to be proportional to the main period of sapphire lattice. Therefore, an assumption that the crystal internal structure of the sample might be the cause of the oscillations is discussed.     

Simple matching vs linear assignment in scheduling models with positional effects: A critical review

This paper addresses scheduling models in which a contribution of an individual job to the objective function is represented by the product of its processing time and a certain positional weight. We review most of the known results in the area and demonstrate that a linear assignment algorithm as part of previously known solution procedures can be replaced by a faster matching algorithm that minimizes a linear form over permutations. Our approach reduces the running time of the resulting algorithms by up to two orders, and carries over to a wider range of models, with more general positional effects. Besides, the same approach works for the models with no prior history of study, e.g., parallel machine scheduling with deterioration and maintenance to minimize total flow time.