电偏转扫描法测量高电荷态ECR源发射度

成功地研制了一套适合于低能离子束流发射度测量的电偏转扫描探测器.对该探测器的原理和结构作了较详细的描述,并给出该探测器对兰州近代物理研究所高电荷态ECR源LECR3引出离子束流发射度的测量结果.典型结果为:在引出高压为15.97kV,引出束流为190μA时,O⁴⁺水平发射度(x方向)为137πmm·mrad,垂直发射度(y方向)为120πmm·mrad(包括90%束流).最后,对测量结果作了一些分析和讨论.     

Study of magnetic properties and magnetoelectric effect in (x) Ni0.5Zn0.5Fe2O4+(1−x)PZT composites

Magnetoelectric (ME) composites consisting of ferrite phase (x) Ni_0.5Zn_0.5Fe₂O₄+ferroelectric phase (1−x)Pb Zr_0.8Ti_0.2O₃ (Lead Zirconate Titanate—PZT) in which x (mol%) varies between 0 and 1 (0.0≤x≤1.0) was synthesized by double sintering ceramic method. The presence of constituent phases of ferrite, ferroelectric and their composites was confirmed by X-ray diffraction studies. The hysteresis measurement was used to study magnetic properties such as saturation magnetization (M_S) and magnetic moment (μ_B). The existence of single domain (SD) particle in the ferrite phase and mixed (SD+MD) particle in the composites was studied from AC susceptibility measurements. ME voltage coefficient for each mol% of ferrite phase was measured as a function of applied DC magnetic field and at the same time influence of magnetic field on ME response and resistivity of composites was studied. The maximum ME voltage coefficient of 0.84 mV/cm Oe was observed for 15% of ferrite phase and 85% of ferroelectric phase in the composites.     

Single Crystal of Lanthanum Hydroxide La(OH)3: Controlled Synthesis by High Pressure Flux Method and Its Growth Mechanism

High pressure synthesis of solid material tends to increase the density,coordination number,symmetry of material and shorten bond length.The solid synthesized at a high pressure and decompressed to ambient pressure often exhibits a metastable "stretched" state,within the high pressure stability field.The crystal grown at a high pressure is of great importance with the development of high pressure technology.Crystal growth is an important factor in the material synthesis.And many methods including gas,solid and solution methods have been used to obtain various single crystals[1].Especially,flux method is an important method for crystal growth,where the components of the desired substance dissolved in a solvent(flux) grow in the process of deposit.Its advantage is that the crystal growth displays natural facets and the disadvantage is that the crystals are relatively small.Up to date,some solid materials have been successfully synthesized by high pressure flux method[2-7].     

Design and experiment of spectrometer based on scanning micro-grating integrating with angle sensor

A compact, low cost, high speed, non-destructive testing NIR (near infrared) spectrometer optical system based on MOEMS grating device is developed. The MOEMS grating works as the prismatic element and wavelength scanning element in our optical system. The MOEMS grating enables the design of compact grating spectrometers capable of acquiring full spectra using a single detector element. This MOEMS grating is driven by electromagnetic force and integrated with angle sensor which used to monitored deflection angle while the grating working. Comparing with the traditional spectral system, there is a new structure with a single detector and worked at high frequency. With the characteristics of MOEMS grating, the structure of the spectrometer system is proposed. After calculating the parameters of the optical path, ZEMAX optical software is used to simulate the system. According the ZEMAX output file of the 3D model, the prototype is designed by SolidWorks rapidly, fabricated. Designed for a wavelength range between 800 nm and 1500 nm, the spectrometer optical system features a spectral resolution of 16 nm with the volume of 97 mm × 81.7 mm × 81 mm. For the purpose of reduce modulated effect of sinusoidal rotation, spectral intensity of the different wavelength should be compensated by software method in the further. The system satisfies the demand of NIR micro-spectrometer with a single detector.     

Thermal and structural study on the lattice compound 1,4-diammoniumbutane bis(theophyllinate)

Crystalline title compound (1) prepared from aqueous solution of theophylline and 1,4-diaminobutane has been structurally and thermally characterized. Both the two-step TG decomposition curve and elemental analysis of the hexagonal crystals show that it consists of theophylline and 1,4-diaminobutane in 2:1 molar ratio. Actually, presence of one type of both theophyllinate anions and 1,4-diammoniumbutane dication have been indicated by FTIR spectroscopy. The molecular structure of lattice compound (1) has been determined by single crystal X-ray diffraction, where the hydrogen positions have been obtained from differential Fourier maps. It has confirmed that the crystal is really built up from these ionic constituents bound together with an extensive net of hydrogen bonds. The coupled TG-FTIR analysis of the evolved gases has revealed that the diamine is released as a whole molecule in the first decomposition step. Clathrate 1 and the proton migration in it might serve as a structural model of solid aminophylline whose crystal structure is still unknown.     

Syntheses,structures and magnetic properties of Mn(II) containing 3D polymeric networks

Two novel 3D coordination polymers {[Mn(aip)(DMF)]}_n, CPO-9, and {[Mn₃(Hatp)₂(atp)₂](H₂O)₂(DEF)₄}_n CPO-10 (aip = 5-aminoisophthalate, atp = 2-aminoterephthalate, DMF = dimethylformamide, DEF = diethylformamide) have been synthesized by solvothermal methods. Their properties have been studied by single-crystal X-ray diffraction, thermogravimetric analysis, high-temperature powder X-ray diffraction and magnetic susceptibility measurements. The crystal structure of CPO-9 is based on infinite chains of carboxylato-bridged five-coordinated Mn(II) ions that are crosslinked via the aip ligands to form a 3D structure. CPO-10 is based on linear trinuclear building units of carboxylato-bridged octahedral Mn(II) ions that are crosslinked by the atp ligands into a 3D structure. Both compounds have 1D channels that contain solvent molecules. The solvent accessible void volume for CPO-10 is 51.9% of the unit cell volume. For both compounds, however, the solvent molecules cannot be removed without the collapse of the structures into amorphous phases at 250 °C. The magnetic susceptibility measurements indicate antiferromagnetic couplings between the Mn(II) ions in both compounds. The magnetic data have been fitted using theoretical approaches.     

Single Crystals of CaNa[ReO4]3: Serendipitous Formation and Systematic Characterization

In an attempt to crystallize Ce[ReO₄]₄ · xH₂O from aqueous solutions of equimolar amounts of Ce[SO₄]₂ and Ba[ReO₄]₂ via salt‐metathesis the serendipitous formation of colorless, transparent, rod‐shaped single crystals of CaNa[ReO₄]₃ was observed as a result of calcium and sodium impurities within the improperly deionized water used. Structure analysis by X‐ray diffraction lead to the conclusion that the title compound crystallizes in the ThCd[MoO₄]₃ structure type with the hexagonal space group P6₃/m and the lattice parameters a = 991.74(6) pm, c = 636.53(4) pm, c/a = 0.642 for Z = 2. The crystal structure contains purely oxygen surrounded and crystallographically unique cations, namely Ca²⁺ in tricapped trigonal prismatic (d(Ca–O) = 6 × 249 pm + 3 × 254 pm), Na⁺ in octahedral (d(Na–O) = 6 × 241 pm), and Re⁷⁺ in tetrahedral coordination (d(Re–O) = 171–173 pm). Furthermore, it was possible to yield an almost phase‐pure microcrystalline powder of the title compound from a melt of equimolar amounts of Na[ReO₄] and Ca[ReO₄]₂ stemming from aquatically obtained precursors.     

水溶液中Cr^3＋的火焰原子吸收光谱法测试条件的优化

为优化火焰原子吸收光谱法测定水溶液中的Cr^3＋的测试条件,分别采用单因素简单比较法、正交实验设计极差分析及正交实验回归方法考察了光谱通带n,空心阴极灯电流I,燃烧器高度h以及乙炔/空气流量比P对于仪器灵敏度的影响。结果表明单因素简单比较法获得的实验条件最优。乙炔/空气流量比P对火焰原子吸收仪器灵敏度影响最大、其次是光谱通带n,燃烧器高度h和灯电流I的影响很小。测定水溶液中的Cr^3＋时仪器灵敏度最佳的实验条件为：乙炔/空气流量比P=0.4;光谱通带n=0.2nm;灯电流I=5mA;燃烧器高度h=5cm。     

Observation of THz coherent transition radiation from single-bunch beam at KURRI-LINAC as an intense pulsed light source

A single-bunch beam has been generated using a developed high-speed avalanche-type pulser in KURRI-LINAC in order to lift restrictions of the spectral resolution in the spectroscopic study and the delay time in the time-resolved measurement. Both of the rise and fall times of the developed pulser are 110 ps. The observation of CTR has confirmed the single-bunch beam. The degree of impurity of single bunch has been estimated to be 1.5% by the analysis of the interferogram.     

[ONSO]型Salen化合物的合成、单晶结构及金属离子识别

一些重金属离子即使在较低浓度时也会对环境、生物体产生毒性,所以研究痕量金属离子识别具有重大意义。荧光传感器由于具有选择性好、灵敏度高、成本低、实时响应等优点, 得到了广泛关注。以2,4-二叔丁基苯酚,3,5-二叔丁基水杨醛和邻氨基苯硫酚为原料合成了类Salen配体L1, 并用1H NMR,13C NMR,IR,元素分析及X射线单晶衍射等手段对其进行了表征。并通过自由挥发法得到了配体L1的单晶结构,实验表明L1是三斜晶、P-1空间群的一个空穴平面[ONSO]四配位环境。通过荧光光谱考察了类Salen配体与金属离子(Li+,Na+,K+,Cd2+,Cs+,Co2+,Cu2+,Hg2+,Mn2+,Ni2+,Zn2+,Ag+)的识别与配位性能。光谱滴定分析表明L1与Zn2+以1∶1的化学计量数配位。另外,L1与Zn2+结合后荧光显著增强,荧光检测限达到5.01×10-5 mol·L-1,而上述提到的其他常见金属离子不引起荧光光谱变化。结果表明L1是一个对检测Zn2+的选择性高,灵敏度强的荧光增强型探针。