CO（ a）+ NO（X）传能体系中的新传能通道

在相对碰撞平动能为 0 .0 5eV的分子束实验条件下 ,研究了亚稳态CO(a) +NO(X)的E E传能通道 .通过测量和分析交碰区的传能发射光谱 ,在 780和 860nm处观测到了NO(b -a)跃迁Ogawa带的△v =+ 4和△v =+ 3序的发射光谱 .从而首次在实验上直接证实了传能过程中第四通道的存在 (CO (a) +NO(X)→CO (X) +NO(b) ) .这一通道的发现解释了前人测量到的在CO(a)与NO(X)碰撞传能过程中CO(a)的猝灭速率远大于NO(A ,B)生成速率的实验结果 ,并进一步证实了这一“经典”E E传能体系为电子交换机理的传能观点     

耦合双原子Jaynes-Cummings模型的腔场谱H

研究了处于激发态的两原子与高Q腔场相互作用单光子过程的腔场谱,给出了初始光场为光子数态、相干态、压缩真空态时的腔场谱数值计算结果,分析了原子间偶极-偶极相互作用强度gα对腔场谱结构的影响.发现真空场Rabi峰,当gα较弱时为4峰,gα较强时为3峰结构;弱场数态(n＞0)时为5峰,强场时为3峰结构.相干态和压缩真空态时,谱结构与光子数分布有关,一般为复杂的多峰结构.结果表明,gα对峰位峰高都有影响,破坏了谱结构的对称性,但这种影响只在真空场和弱场时才较明显.     

GS-221高速摄影测量仪测角信息的采集与处理

在GS-221高速摄影测量仪中,测角信息采集与处理速度的快慢是重要性能指标之一。本文讨论了如何在尽可能短的时间内对测角信息进行采集和处理的软件实现方法。     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

Fast neighborhood search for the single machine total weighted tardiness problem

Most successful heuristics for solving 1||∑w_jT_j are based on swap moves. We present an algorithm which improves the complexity of searching the swap neighborhood from O(n³) to O(n²). We show that this result also improves the complexity of the recently developed dynasearch heuristics.     

血清蛋白-荧光素复合物单扫极谱波与应用

在0．08mol／L的HAc中，荧光素与牛血清白蛋白(BSA)或人血清白蛋白(HSA)相互作用形成复合物。复合物使荧光素在-0．58V(vs．SCE)处的还原峰电流增大，峰电流的增大值与加入的BSA或HSA的浓度在一定的范围内呈线性关系。BSA在2—24μg／mL范围内呈线性关系，检出限为1μg／mL；HSA在2—22μg／mL范围里呈线性关系，检出限为0．8μg／mL。应用该法测定了人血清蛋白样品，结果令人满意。     

Substituent effects on the kinetics for the chemiluminescence reaction of 6-arylimidazo[1,2-a]pyrazin-3(7H)-ones (Cypridina luciferin analogues): support for the single electron transfer (SET)-oxygenation mechanism with triplet molecular oxygen

Kinetics of chemiluminescence reactions of 2-methyl-6-phenylimidazo[1,2-a]pyrazin-3(7H)-one (1c, Cypridina luciferin analogue) and substituent effects of the 6-aryl group of derivatives 1 strongly suggest that the rate-determining step is a single electron transfer from an anion derived from 1 to a triplet molecular oxygen (O₂) in the oxygenation process.     

Atomic structure of InAs quantum dots on GaAs

In recent years, the self-assembled growth of semiconductor nanostructures, that show quantum size effects, has been of considerable interest. Laser devices operating with self-assembled InAs quantum dots (QDs) embedded in GaAs have been demonstrated. Here, we report on the InAs/GaAs system and raise the question of how the shape of the QDs changes with the orientation of the GaAs substrate. The growth of the InAs QDs is understood in terms of the Stranski–Krastanow growth mode. For modeling the growth process, the shape and atomic structure of the QDs have to be known. This is a difficult task for such embedded entities.

In our approach, InAs is grown by molecular beam epitaxy on GaAs until self-assembled QDs are formed. At this point the growth is interrupted and atomically resolved scanning tunneling microscopy (STM) images are acquired. We used preparation parameters known from the numerous publications on InAs/GaAs. In order to learn more about the self-assemblage process we studied QD formation on different GaAs(0 0 1), (1 1 3)A, and ( )B substrates. From the atomically resolved STM images we could determine the shape of the QDs. The quantum “dots” are generally rather flat entities better characterized as “lenses”. In order to achieve this flatness, the QDs are terminated by high-index bounding facets on low-index substrates and vice versa. Our results will be summarized in comparison with the existing literature.     

Self-assembled luminescent CdSe-ZnS quantum dot bioconjugates prepared using engineered poly-histidine terminated proteins

We report a simple and versatile approach for the conjugation of luminescent CdSe-ZnS core-shell quantum dots (QDs) to proteins through coordination of engineered C-terminal oligohistidine sequences. Several histidine tail containing proteins were self-assembled onto the QD surface using this method. A recombinant antibody specific for the high explosive 2,4,6-trinitrotoluene (TNT) was conjugated to QDs through a carboxy terminal histidine tail and the bioconjugate used to detect TNT by competitive immunoassay. TNT was detected over the range of 10 μg/ml down to 41 ng/ml using the scFv conjugated to QDs. These results open up the possibility to conjugate luminescent QDs to a whole range of proteins to form QD bioconjugates that can be effectively used in bio-oriented applications, such as sensing, imaging, immunoassay and other diagnostics.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.