Chiral recognition in NMR spectroscopy using crown ethers and their ytterbium(III) complexes

Chiral crown ethers 1 and 5 are useful enantiomeric discriminating agents in ¹H NMR spectroscopy for neutral and protonated primary amines, amino acids, and amino alcohols. The presence of the carboxylic acid groups in 1 and 5 provide sites at which ytterbium(III) can bind. Adding ytterbium(III) nitrate to crown–substrate mixtures in methanol-d₄ causes shifts in the spectra of substrates and often enhances the chiral discrimination in the ¹H NMR spectrum. The enhancement in enantiomeric discrimination that occurs in the presence of ytterbium(III) allows lower concentrations of the crown ether to be used in chiral recognition studies. Several amide derivatives of 1 were prepared and evaluated as chiral NMR discriminating agents, although except for 1e, these were less effective than 1.     

Syntheses, characterization and electrical property of a new silver diphosphonate with zeolite-like framework and three-dimensional silver interactions: [Ag4(O3PCH2CH2PO3)]

A new silver organodiphosphonate, [Ag₄(O₃PCH₂CH₂PO₃)] (1), has been synthesized and characterized by X-ray diffraction, IR, TGA-DSC, electricity measurement and element analysis. 1 crystallizes in the monoclinic space group P2(1)/n (a=6.0115(16) Å, b=8.630(2) Å, c=8.462(2) Å, β=97.693(4)°, Z=2, R₁=0.0604, wR₂=0.1450). 1 contains one-dimensional channels and a three-dimensional Ag?Ag interacted substructural net. TGA and XRD indicate little weight loss up to 300 °C and little structure change after heated at 170 °C for 2 h, respectively. The grain interior conductivity of 1 increases continuously from 50 to 170 °C. Results of EHT calculations show that under thermal or optical excitation the conductivity of 1 is mainly due to transfer of π antibonding electrons of -PO₃ group through O atom to Ag 5s orbital, which also leads to enhancement of Ag?Ag interactions and promotes formation of Ag?Ag substructural net.     

Self-assembled monolayers on Au microelectrodes

Long chain alkanethiols self-assembled monolayers (SAMs) formed on Au microelectrodes showed higher sensitivity towards defects than the same monolayers on macroelectrodes. The analysis of cyclic voltammetry and electrochemical impedance spectroscopy (EIS) experiments performed on covered microelectrodes were consistent with the formation of pinholes of about 10 nm in diameter. Moreover, the EIS data exhibited a specific behavior that was interpreted invoking the short circuiting of the pinholes impedance by the surrounding surface of the microelectrode in the high frequency domain, whereas in the low frequencies, the surface covered by the SAM was assume to act as an insulator.     

Study of reaction processes by in-line near-infrared spectroscopy in combination with multivariate curve resolution: Esterification of myristic acid with isopropanol

The acid-catalysed esterification of myristic acid with isopropanol was studied by using near-infrared spectroscopy (NIR) in combination with soft-modeling curve resolution (MCR) methodology with a view to establishing the effect of experimental variables on the reaction kinetics. The reaction was conducted at temperatures above the boiling point of the alcohol, with continuous addition of an isopropanol/water mixture to the reactor. Spectral and concentration profiles were determined by applying soft-modeling curve resolution methodology to a column-wise augmented data matrix containing the spectra for the pure components. MCR profiles were compared with reference values and found to depart from then by less than 3% as %RSE for concentrations and to exhibit correlation above 0.999 for spectra.The reaction kinetics as estimated from the concentration profiles was found to be pseudo-first-order. Also, the pseudo-first-order rate constant was found to depend on the flow-rate of the isopropanol/water mixture and its water content; although the constant decreased with increase in the proportion of water, a content of ca. 15% could be used without important retarding effects on the kinetics. The proposed NIR-MCR method allows the rate constant and the influence of the initial water content to be determined with a view to minimizing consumption of the raw materials and optimizing the experimental conditions.     

铽-聚二甲基硅氧烷配合物的荧光特性

用多种谱学方法证明聚二甲基硅氧烷(PDMS)中的氧原子能与Tb3+键合生成Tb3+和PDMS的配合物(Tb3+-PDMS), 并发现生成配合物后, PDMS和Tb3+的荧光发射同时得到增强. 荧光强度的增强与配合物中Tb3+含量有关, 当配合物中Tb3+的含量为2.0%(w)时, 配合物的荧光强度最大, 可增强1547%左右.     

玉米叶片残体腐解过程的傅里叶变换红外光谱研究

采用傅里叶变换红外光谱对玉米植株叶片残体腐解过程进行了研究。结果表明，随着玉米叶片残体腐解的进行，羟基，酮碳基，甲基，在和次甲基的含量逐渐降收据 的含量增加。     

Fourier transform spectroscopy using image sensors

Multichannel Fourier transform spectrometers utilizing image sensing devices are reviewed along with the instrumental design concepts. Although the idea itself is fairly simple, a photographic plate in holographic spectroscopy is replaced by an image sensor, there are stringent requirements to be satisfied in order to realize the system for field use. Mainly two types of the instrument, which are characterized by the Sagnac common-path interferometer and the polarization interferometer optics, respectively, are described with regard to their system performances. Examples of the system operation introduced show that Fourier transform spectrometers without mechanical moving parts play an important role in a variety of spectroscopic applications under severe surroundings. In a summary, methods for the resolution enhancement and comments on the signal-to-noise ratio are also included.     

Measurement of lactate in whole human blood with near-infrared transmission spectroscopy

We have evaluated the potential of near-infrared spectroscopy (NIRS) as a technique for rapid analysis of lactate in whole blood. To test the NIRS technique, a comparison was made with a standard clinical method using whole blood samples taken from five exercising human subjects at three different stage of exercise. To expand lactate concentration within the physiological range, standard additions method was used to generate 45 unique data points. Spectra were collected over the 2050-2400 nm spectral range with a 1 mm optical path length quartz cell. Reference lactate concentrations in the samples were determined by enzymatic measurements. Estimates and calibration of the lactate concentration with NIRS was made using partial least squares (PLS) regression analysis and leave-N-out cross validation on second derivative spectra. Separate calibrations were determined from each of the subject samples and cumulative PRESS was used to determine the number of PLS factors in the final model. The results from the PLS model presented are generated from the five individual calibration coefficient vectors and provided a correlation coefficient of 0.978 and a standard error of cross validation of 0.65 mmol l⁻¹ between the enzymatic assay and the NIRS technique. To study the parameters that impact the spectra baseline and the correlation between the calculated model and the data, referenced measurements of lactate against baseline spectrum were made for each individual. A correlation coefficient of 0.992 and a standard error of cross validation of 0.21 mmol l⁻¹ were found. The results suggest that NIRS may provide a valuable tool to assess physiological status for both research and clinical needs.     

Future of biological aerosol detection

Biological aerosol detection in real time is an urgent civilian and military requirement. Such detection capability will be useful in environmental monitoring, for example, in gathering information in perceived hazardous areas such as housing developments downwind of sewage treatment plants. To be truly functional, the instrument has to operate continuously, 24 h a day and 7 days a week with minimal maintenance and few false alarms. A novel concept is proposed. The system employs a rapid front-end warning/alarming mechanism based on optical technologies that provides useful information for protection decision makers. This is connected to a sample collector that feeds a slower back-end liquid chemistry system that provides analytical results to the medical personnel to assist in prophylaxis and therapy decisions. Experience gained from measuring fluorescence signals of single bacterial spores under flow cytometry (FCM) using UV excitation at 340-360 nm, was applied to concept testing of a prototype instrument, built to do the same for aerosols. This machine was capable of resolving particle size as well as fluorescence intensity of each particle under laboratory and field conditions; it was called the fluorescent aerodynamic particle sizer (FLAPS). This paper describes practical aspects of measuring biological aerosols when the results must be compared to reference samplers that provide culturable or “live” data. Treatment of particle size and fluorescence information is discussed with respect to FLAPS and reference data fidelity. Along with an objective method to evaluate FLAPS data correlation to reference data, an approach for determining limit of detection in the field is discussed. In addressing the back-end detector chemistry, we have prioritized a number of important biological characteristics that must be given to a clinician to help in prophylaxis and therapy decisions. A series of biochemical measurements are proposed to define the threat of a sample and different solutions are given to implement these tests. We predict that the future for biological detection looks promising for fluorescence in situ hybridization (FISH) techniques in identifying microorganisms. A conceptual instrument based on merging FCM and microchip-based analysis is described.