Ceramic Films via Organometallic Complex as Single Source Precursor

Fe2(CO)6(μ-S2) was used as a single source precursor in attempt to produce FeS film via MOCVD. Pyrolysis of Fe2(CO)6(μ-S2) at temperature below 500℃ produced Fe1-xS or Fe7S8 powder as indicated by its powder X-ray spectra. At 750 ℃, polycrystalline FeS powder was obtained. In film deposition, polycrystalline Fe1-xS or Fe7Ss films were obtained on Si(100) and Ag/Si(100) substrates below 500 ℃. SEM micrographs showed the film on Si(100) substrate containing whisker like grains. However, pillar like grains were obtained on Ag/Si(100) substrate.Deposition rates are also different for different substrates as evaluated by the thickness of the films, which were obtained by SEM micrographs of the cross section of the films. At 750℃, similar polycrystalline Fe1-xS or Fe7S8 film was obtained.     

Novel Chiral Ferrocenyl Aziridino Alcohol Catalysts Promoting Asymmetric Addition of Diethylzinc to Aldehydes

Optically active aziridino alcohols containing ferrocenyl groups were prepared from commercially available L-threonine in excellent yields and used as catalysts to promote the asymmetric addition of diethylzinc to aryaldehydes to afford 1-arylpropanol in up to 84% enantiomeric excesses with moderate to good yields.     

Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.     

Some new classes of stochastic order relations among arithmetic random variables, with applications in actuarial sciences

Recently, Fishbum and Lavalle (1995) and Lefèvre and Utev (1996) have considered some stochastic order relations specific for arithmetic random variables. The present work is concerned with these orderings, together with two other classes of stochastic order relations closely related. First, attention is paid to characterizations and various properties of all these orderings. Then, sufficient conditions of crossing-type for the two new classes of orderings are derived and extrema among discrete random variables are deduced. This is applied in actuarial sciences to obtain new bounds for the classical single life premiums as well as for the probability of ruin in the compound binomial risk model.     

用紧耦合方法研究C4+和O6+与He原子碰撞

用双中心原子轨道紧耦合方法计算了C4+-He以及O6+-He碰撞的单俘获总截面,入射离子的能量范围为10～100keV/amu,所得计算结果在实验误差范围内与实验值很好符合.对满壳层入射离子,研究了单俘获截面随入射离子电荷态的变化,并讨论了原子轨道展开波函数数目对计算结果的影响.p     

Ⅰ类超晶格势阱中能级分布及电子跃迁规律研究

在研究大量实验曲线的基础上,指出势阱所有能级均有一定的宽度,电子或空穴在各能级中出现的概率符合正态分布,从理论上分析了I类超晶格和双势垒单势阱的发光光谱与吸收光谱·解释了GaAs/Ga1-xAlxAs多量子阱和超晶格吸收光谱吸收边及量子阱变窄时各吸收峰的“蓝移现象”及GaAs/Ga1-xAlxAs双势垒单量子阱样品的电流—电压特性曲线及电导—电压特性曲线的特征和出现的“负阻效应”·     

单链表在离子发动机光学系统粒子模拟中的应用

 目前离子发动机光学系统数值模拟大多采用PIC方法，由于该方法需要跟踪单个粒子的运动，因此需要存储每个粒子的位置信息与运动信息。传统的粒子模拟程序中，保存粒子信息大多采用数组的方式，但是采用这种方式存在弊端，例如对粒子总数变化的自适应不好。基于此开发了一种使用链式存储结构的粒子模拟程序，该程序使用带头节点的单向链表存储粒子信息。使用基于链式存储结构的PIC方法对离子发动机光学系统进行了粒子模拟，验证了链式粒子信息存储方法在粒子模拟中的可用性。模拟表明：（1）在粒子模拟中采用链式存储结构存储粒子信息，无需预先指定最大粒子总数，程序可自适应粒子总数的变化，因此无需进行试算，节省了计算时间；（2）在粒子模拟中采用链式存储结构，由于不存在内存资源的浪费，因而可显著提高程序的存储效率与计算效率。     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

表面活性剂对均相沉淀法制备单晶Ce2O(CO3)2￠H2O微粉形貌及 形成机理的影响

在尿素及硝酸铈的混合溶液中分别加入表面活性剂CTAB、 PEG19000、OP-10,利用均相沉淀法合成了不同形貌的CeO2超细前驱体Ce2O(COa)2·H2O,采用X射线衍射及透射电子显微镜等测试手段,对产品的物相和形貌进行了表征．实验结果表明,所得产品均为斜方晶系的单晶Ce2O(CO3)2·H2O,且表面活性剂的加入使晶体的晶化程度明显提高;添加不同的表面活性剂得到不同形貌尺寸的产物: 阳离子型表面活性剂CTAB对Ce2O(CO3)2·H2O晶体的形貌影响不大,所得产物尺寸变小,且分散性得到一定的改善;非离子型表面活性剂对所得产物的形貌影响显著．加入PEG19000和OP-10分别得到了形状排列有序的、尺寸较均匀的、较规则无团聚的微米棒及具有紧密结合中心的发散状的花样微粒．不同形貌前驱体的形成与晶粒形成生长机理的改变有关．