聚氨酯抛光片在透镜高效生产中的应用

本文对聚氨酯抛光片的性能、特点作了概要介绍，在透镜生产中应用聚氨酯抛光片单块加工及成盘加工的方法分别作了讨论，以及众多的工艺因素作了较为详细的分析，介绍了常出现的光圈异常现象的排除方法，从而达到稳定、高效的目的。     

Nanocomposites of polyurethane with various organoclays: Thermomechanical properties,morphology, and gas permeability*

The properties of polyurethane (PU) nanocomposites with three different organoclays were compared in terms of their thermal stabilities, mechanical properties, morphologies, and gas permeabilities. Hexadecylamine–montmorillonite, dodecyltrimethyl ammonium–montmorillonite, and Cloisite 25A were used as organoclays for making PU hybrid films. The properties were examined as a function of the organoclay content in a matrix polymer. Transmission electron microscopy photographs showed that most clay layers were dispersed homogeneously into the matrix polymer on the nanoscale, although some particles of clay were agglomerated. Moreover, the addition of only a small amount of organoclay was enough to improve the thermal stabilities and mechanical properties of PU hybrid films, whereas gas permeability was reduced. Even polymers with low organoclay contents (3–4 wt %) showed much higher strength and modulus values than pure PU. Gas permeability was reduced linearly with an increasing amount of organoclay in the PU matrix. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 670–677, 2002; DOI 10.1002/polb.10124     

聚氨酯在磨粒侵蚀条件下的表面化学效应

在工程实际中，由于高分材料的抗磨粒侵蚀性能都比较而得到了广泛的应用，然而载至目前，所见这类材料在磨粒侵蚀磨损机理方面的研究报道相当之少，而且仅局限于物理过程的考察。因此，对聚氨酯在磨粒侵蚀条件下的表面化学效应进行了试验研究。利用扫描电子显微镜、Ｘ射线光电子能谱仪和傅立叶表面红外分析仪，对这种高分子材料在磨粒侵蚀磨损前后表面的微观形貌、元素组成、结合能和官能闭进行了分析。     

Sol-Gel Microspheres Doped with Glycerol: A Structural Insight in Light of Forthcoming Applications in the Polyurethane Foam Industry

Porous silica-based microspheres encapsulating aqueous glycerol can be potential curing agents for one-component foams (OCFs). Such agents have the advantage of an enhanced sustainability profile on top of being environmentally friendly materials. A synthetically convenient and scalable sol-gel process was used to make silica and organosilica microspheres doped with aqueous glycerol. These methyl-modified silica microspheres, named “GreenCaps”, exhibit remarkable physical and chemical stability. The microspheres were characterized by scanning electron microscopy, transmission electron microscopy at reduced pressure, and cryogenic nitrogen adsorption—desorption analysis. The structure of the materials was also analyzed at the molecular level by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. As expected, the degree of methylation affects the degree of encapsulation and pore structure. Microspheres similarly methylated, however, can differ considerably in surface area and pore size due to the templating effect of glycerol on the organosilica structure. The results of the structure analysis reveal that glycerol is efficiently encapsulated, acts as a template, barely leaches over time, but is released by depressurization. A proper application of these microspheres can later on enhance both the environmental and health profile, as well as the technical performance (curing speed, foam quality, and froth thixotropy) of spray polyurethane foams.     

Biodegradability study of polylactic acid/ thermoplastic polyurethane blends

Blends with varied ratio of polylactic acid (PLA) and thermoplastic polyurethane (TPU) were prepared by melt blending. The PLA content in blends was 20, 40, 60 and 80 wt%. Samples of pure PLA and TPU that underwent the same thermal treatment were also prepared. Biodegradation was examined by respirometry. Pure TPU started to degrade immediately due to degradation of the low molecular weight plasticizer in the polymer. Pure PLA, on the other hand, exhibited an incubation period after which degradation progressed rapidly and was almost complete after 70 days. The degradation profile of the blends can be correlated to their morphology. Samples with a co-continuous morphology initially degrade at a higher rate than the rest of the samples due to the higher exposure of the TPU phase in these blends.     

Structure analysis of polyether-based thermoplastic polyurethane elastomers by FTIR, 1H NMR and 13C NMR

One kind of unknown structure sequence and composition ratio of thermoplastic polyurethane elastomers were characterized by nuclear magnetic resonance spectroscopy, Fourier transformed infrared spectroscopy, and gel permeation chromatography (GPC). The results showed that the polyurethane (PU) was obtained from poly(tetramethylene glycol) (PTMG) as soft segment, 1,4-butanediol (BDO) as chain extender, and 4,4′-methylenediphenyl diisocyanate (MDI) as hard segment. Furthermore, the composition ratio of MDI:PTMG:BDO was 2.07:1.22:1.00. At last, the molecular weight of PU was determined by GPC, and the number average molecular weight (M_n) and weight average molecular weight (M_w) are 63,300 and 133,800?g?mol^?1, respectively.     

Design and characterization of bi-soft segmented polyurethane microparticles for biomedical application

Bi-soft segmented poly(ester urethane urea) microparticles were prepared and characterized aiming a biomedical application. Two different formulations were developed, using poly(propylene glycol), tolylene 2,4-diisocyanate terminated pre-polymer (TDI) and poly(propylene oxide)-based tri-isocyanated terminated pre-polymer (TI). A second soft segment was included due to poly(?-caprolactone) diol (PCL). Infrared spectroscopy, used to study the polymeric structure, namely its H-bonding properties, revealed a slightly higher degree of phase separation in TDI-microparticles. TI-microparticles presented slower rate of hydrolytic degradation, and, accordingly, fairly low toxic effect against macrophages. These new formulations are good candidates as non-biodegradable biomedical systems.     

Degradation studies on segmented polyurethanes prepared with poly (d, l-lactic acid) diol, hexamethylene diisocyanate and different chain extenders

In order to investigate the effect of different chain extenders on degradation properties of segmented polyurethanes (SPUs), three types of segmented polyurethanes (SPU-P, SPU-O and SPU-A) based on poly (d, l-lactic acid) diol, hexamethylene diisocyanate (HDI), were synthesized with three chain extenders: peperazine (PP), 1, 4-butanediol (BDO) and 1, 4-butanediamine (BDA), respectively. Thermogravimetric analysis, activation energy and in vitro degradation were used to characterize the obtained polymers, quantitatively. The results revealed that chain extender played an important role in thermal degradation and biodegradation of polyurethanes. Thermogravimetric analysis and activation energy demonstrated that SPU-O, SPU-P and SPU-A presented best, second and weakest thermostability, respectively, and the thermal degradation mechanism of three SPUs was the same and regarded as a two-stage degradation. Data of hydrolytic degradation of the polymers during 12 weeks indicated that the in vitro degradation stability of SPU-A and SPU-P was similar, but both were better than that of SPU-O. The reason for the differences among three types of SPUs was discussed in this paper.     

芳纶纤维/SMPU-SiO2复合材料的界面性能研究

选用形状记忆聚氨酯(SMPU)和正硅酸乙酯(TEOS)为前驱体,固体酸对甲基苯磺酸(PTSA)为催化剂,利用空气中的水分为水解水源,通过溶胶-凝胶法原位制备了形状记忆聚氨酯与二氧化硅( SMPU-SiO2)杂化材料,并将杂化材料应用于芳纶纤维增强的柔性复合材料中,以期改善芳纶纤维与基体的界面性能.同时,针对芳纶纤维表面...