聚碳酸酯改性聚酯型热塑性聚氨酯弹性体的合成与性能

以聚碳酸１，６－已二醇酯（ＰＣ）、聚己二酸－１，４－丁二醇酯（ＰＢＡＧ）、４，４－二苯基甲烷二异氰酸酯（ＭＤＩ）和１，４－丁二醇（ＢＤＯ）为原料，合成线型聚碳酸酯改性聚酯型热塑性聚氨酯弹性体（ＴＰＣＺＥ）．对其玻璃化转变温度Ｔｇ、力学性能、耐水解性能和流变特性进行了研究。实验结果表明：随ＰＣ二醇含量的增加，弹性体的贮能模量下降，Ｔｇ则向高温方向（从－７．８℃到＋２．６℃）移动。水解后的强度保持率从８５．４％提高到９９，７％和１１７％，熔体的表现粘度降低，加工性能得到改善。     

Deformation calorimetry of polyurethane block-copolymers

A thermodynamic analysis of the uniaxial stretching of polyurethanes of various compositions and mechanical histories was carried out by using deformation calorimetry. The initial small strain deformations were found to result from the volume elasticity of the hard phase. The intramolecular energy contributions of the soft blocks were estimated. The hard block contributions were shown to depend on their content and on the degree of sample stretching. The predominant role of the soft component is proved to be manifested only in softened samples with a hard block content not exceeding 30%. The thermodynamics of the softening and hysteresis phenomena were studied. The dependence of the deformation mechanism on the hard block content and mechanical history is discussed.The authors express their thanks to Dr. A. R. Korigodsky and Dr. M. P. Letunovsky for the PU samples.     

Fluordiazadiphosphetidine, 11. Mitt.: Eine neue Methode zur Herstellung der doppelt zwitterionischen Verbindung (CH3N)6P4F8

A new synthetic route for the preparation of the betain-like compound (CH₃N)₆P₄F₈ from (CH₃NPF₃)₂,N-methyl-hexamethyldisilazane andN,N-dimethyl-urea has been found. The steps of this multi-stage reaction could be rationalized to a far extent.

10. Mitteilung:Kubjacek M., Utvary K., Mh. Chem.112, 305 (1981).     

Enhanced glucose production from cellulose using coimmobilized cellulase and β-glucosidase

β-Glucosidase was covalently immobilized alone and coimmobilized with cellulase using a hydrophilic polyurethane foam (Hypol®FHP 2002). Immobilization improved the functional properties of the enzymes. When immobilized alone, the K_m for cellobiose of β-glucosidase was decreased by 33% and the pH optimum shifted to a slightly more basic value, compared to the free enzyme. Immobilized β-glucosidase was extremely stable (95% of activity remained after 1000 h of continuous use). Coimmobilization of cellulase and β-glucosidase produced a cellulose-hydrolyzing complex with a 2.5-fold greater rate of glucose production for soluble cellulose and a four-fold greater increase for insoluble cellulose, compared to immobilized cellulase alone. The immobilized enzymes showed a broader acceptance of various types of insoluble cellulose substrates than did the free enzymes and showed a long-term (at least 24 h) linear rate of glucose production from microcrystalline cellulose. The pH optimum for the coimmobilized enzymes was 6.0. This method for enzyme immobilization is fast, irreversible, and does not require harsh conditions. The enhanced glucose yields obtained indicate that this method may prove useful for commercial cellulose hydrolysis.     

丁苯、丁腈基聚氨酯的形态与性能

用示差扫描量热法 (DSC)、红外分光光度计 (FTIR)和原子力显微镜 (AFM)研究了端羟基聚丁二烯 苯乙烯共聚物 (HTBS)、端羟基聚丁二烯 丙烯腈共聚物 (HTBN)和端羟基聚丁二烯 (HTPB)与甲苯二异氰酸酯、1 ,4 丁二醇构成的溶液法聚二烯烃基聚氨酯 (PU)的形态结构 .结果表明HTPB和HTBS基PU的相分离程度很大 ,而HTBN基PU的相分离程度小 .这可能归因于HTBS软段的极性低 ,不能与硬段形成氢键 ,而HTBN软段中的腈基具有很强的极性 ,且可以与硬段形成氢键作用 ,增加了软硬段间的相容性 ,相分离程度明显降低 .AFM表明HTBN PU随着硬段含量提高 ,表面粗糙度增大 ,由软段为连续相逐渐过渡到双连续结构 .在硬段含量 6 3%时 ,HTBN和HTPB基PU均呈双连续结构 ,而HTBS PU中硬段为连续相 .HTBN PU软段的相区尺寸在1 2nm左右 ,表面粗糙度较大 ,HPBS PU软段的相区尺寸在 1 1nm左右 ,表面粗糙度最小 ,HTPB PU存在 1 4nm和 5 0nm大小不等的软段相区尺寸 .力学性能表明 ,在软段中引入苯乙烯和丙烯腈结构 ,可使聚氨酯抗张强度分别提高 1 5和 2倍 ,模量和断裂伸长率也明显提高     

油墨用聚氨酯树脂的研究

研究用于印刷油墨的单组分溶剂型聚氨酯树脂，考查聚合物多元醇和异氰酸酯对树脂微观形态、机械性能以及印刷适应性和附着性等性能的影响。结果表明：聚酯型树脂的附着性较好，4，4-二甲苯甲烷二异氰酸酯(MDI)基树脂的附着性较佳。     

Characterisation of porous silica. 2. CPG-10 (VYCOR)

Porous silica CPG-10 has been characterised by adsorption of benzene before and after modification with trimethylchlorosilane. The Brunauer–Emmet–Teller (BET) specific surface areas were determined where possible. Modification of CPG-10 reduces its adsorption for benzene and hence reduces the BET specific surface area, with the extent of reduction depending on the extent of modification. For a fully modified sample with the highest surface concentration of trimethylsilyl groups, the adsorption isotherm changes from type IV of the unmodified sample to type V. The hysteresis loop size and position are also altered. A mechanism for multilayer adsorption and capillary condensation in modified porous silica is proposed.     

测定水性聚氨酯树脂平均相对分子质量及其分布的高效凝胶渗透色谱法

选用HP PL gel MIXED-B柱双柱串联，四氢呋喃作流动相，紫外吸收检测器测定了水性聚氨酯树脂的平均相对分子质量及其分布；通过一系列的条件试验，确定了最佳的凝胶色谱（GPC）条件，结果令人满意；该研究有助于了解水性聚氨酯树脂性能，有效地指导工艺生产和基础研究。     

Gel permeation chromatographic analysis of polyurethane prepolymer synthesis kinetics II. The effects of stoichiometry and type of diisocyanate

The kinetics of formation of polyurethane prepolymers is studied by an analytical technique which involves reactive quenching of the isocyanate, separation of the oligomeric species by GPC, and measurement by UV absorbance of the quenched moieties. The precision of the kinetic parameters and the ratios of the oligomers are determined. The effect of changes in reactant stoichiometry on the ratio of oligomers is measured and compared to the value predicted by an equation from Flory. Toluene diisocyanate is shown to give fewer high oligomers than predicted, while methylene diphenylene diisocyanate gives nearly the predicted values. Tetramethylxylene diisocyanate gives more high oligomers than predicted, an unexpected but possibly important result. Catalyst is shown to increase the reaction rate of the last by more than 200 times. © 1994 John Wiley & Sons, Inc.