CdS and Cd carboxylate nanoclusters dispersed in polymer matrix produced by a freeze drying method

Cadmium sulfide (CdS) nanoclusters were prepared by a freeze drying method from two types of cadmium carboxylates. One was cadmium methacrylates that were part of poly(methyl methacrylate) (PMMA) ionomer. The other was cadmium acetates that were dispersed in PMMA. X-ray diffraction was mainly used to study the formation and the size of nanoclusters. The size of CdS made from the ionomer was 0.9 nm, whereas that from the composite of cadmium acetate and PMMA was 2 nm. This was consistent with the size difference of the precursors of CdS: i.e., Cd carboxylate nanoclusters (ionic aggregates) were smaller in the ionomer than in the PMMA mixture, because ionic groups in the ionomer were constrained due to their connectivity to backbone chains and thus forming smaller ionic aggregates. Once stabilized, however, CdS nanocluster sizes were unchanged despite thermal treatments at up to 220 °C for 24 h for both systems. Structural transformations from a freeze dried cadmium carboxylate powder, to a CdS-containing powder, and to a heat-treated CdS-containing sample are speculated for both types of systems.     

TiO_2/Ag_2NCN复合光催化剂的制备与可见光催化性能

利用银盐与单氰胺水溶液的沉淀反应,通过共混不同质量分数的纳米TiO2粒子制备了TiO2/Ag2NCN复合光催化剂.使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外(FTIR)光谱仪和紫外-可见(UV-Vis)吸收光谱仪对复合光催化剂的结构进行了表征.结果表明,锐钛矿相TiO2纳米颗粒沉积在Ag2NCN表面形成异质结构,二者间以弱的物理作用力相结合.TiO2的掺杂使得复合颗粒的UV-Vis吸收光谱发生红移,带隙变窄.以亚甲基蓝(MB)为光催化降解对象,研究了TiO2/Ag2NCN复合颗粒的可见光催化活性.结果表明,与单一Ag2NCN相比,复合颗粒表现出增强的光催化性能.对TiO2/Ag2NCN复合颗粒的光催化反应动力学过程及光催化机理进行了探讨.     

Detecting DNA Damage with a Silver Solid Amalgam Electrode

Mercury electrodes modified with supercoiled (sc) DNA have been used as highly sensitive tools for the detection of DNA strand breaks or as sensors for DNA cleaving substances. In this paper we show that silver solid amalgam electrode (AgSAE), in connection with alternating current voltammetry, provides similar information about DNA damage as the hanging mercury drop electrode. The AgSAE can be used for the detection of enzymatic or chemical DNA cleavage in solution or at the electrode surface. AgSAE modified with scDNA can be utilized as a sensor for DNA nicking substances.     

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

An iodide/anion exchange route to benzimidazolylidene silver complexes from benzimidazolium iodide: Crystal structures of N,N′-dibutylbenzimidazolylidene silver chloride, bromide, cyanide and nitrate

Syntheses of N,N′-dibutylbenzimidazolylidene silver complexes having chloride, nitrate or cyanide as an anion part through an iodide/anion exchange from N,N′-dibutylbenzimidazolium iodide are described, representing a practical route to benzimidazolylidene silver complexes from readily accessible benzimidazolium iodide. The crystal structures of N,N′-dibutylbenzimidazolylidene silver chloride, bromide, cyanide and nitrate have been determined, showing a close ligand-unsupported Ag-Ag interaction in [(NHC)₂]Ag⁺[AgX₂]⁻ and a “T” shape geometry about the silver(I) cation in complexes of chloride, bromide and cyanide, but a nearly linear shape in the bis(N,N′-dibutylbenzimidazolylidene) silver complex [ with non-coordinating nitrate anion.     

Synthesis of Ag and Ag/SiO2 sols by solvothermal method and their bactericidal activity

Ag and Ag/SiO₂ sols containing nanocrystalline silver particles can be advantageously prepared by solvothermal methods using an autoclave with conventional thermal or microwave heating. In this process, the reduction of silver salts can be realized with alcohols like ethanol in the presence of polyvinylpyrrolidone at temperatures of more than 120 °C. Furthermore a combination of silver salt reduction with hydrolysis of alkoxysilanes during the solvothermal process can yield Ag/SiO₂ composite sols. Particle size and crystallinity of as-prepared particles are analyzed by means of X-ray diffraction and high-resolution transmission electron microscopy. Nanosized silver particles gained by this process exhibit antimicrobial properties that are investigated in detail after application on textile fabrics.     

An Antibacterial Nonenzymatic Glucose Sensor Composed of Carbon Nanotubes Decorated with Silver Nanoparticles

A glucose sensor composed of silver nanoparticles decorated carbon nanotubes (Ag‐NPs/CNTs) prepared by ion implantation is described. Ag‐NPs with size of 2–4 nm are uniformly distributed in the CNTs after ion implantation. This process provides a strong combination between Ag‐NPs and CNTs and can effectively prevent the Ag‐NPs from aggregation. A linear range of 125 µM to 10 mM towards glucose determination was obtained. The Ag‐NPs/CNTs electrode shows minimal interferences from co‐existence species such as uric acid and ascorbic acid and an antibacterial rate of 94 % towards E. coli.     

Impedimetric Detection of DNA Damage with the Sensor Based on Silver Nanoparticles and Neutral Red

Novel electrochemical DNA‐sensor based on glassy carbon electrode (GCE) modified with Ag nanoparticles, Neutral red covalently attached to its surface and native DNA adsorbed on modifier coating was developed for the estimation of DNA damage on example of model system based on Fenton reagent. As was shown, the oxidation process resulted in synchronous increase of electron transfer resistance and capacitance measured by electrochemical impedance spectroscopy (EIS). The contribution of each sensor component on the signal was specified and sensitivity estimated against similar surface coatings. The shift of EIS parameters was found to be higher than that of similar biosensors reported. The DNA sensor was tested on the estimation of antioxidant capacity of green tea infusions again the results of coulometric titration with electrogenerated bromine.     

Cyclic and acyclic S2O2 donor-type ionophores. Ion-pair extraction and transport of Ag(I) picrate, and X-ray confirmation of existence of the ion-pair complex

Extraction and transport behaviors of isomeric oxathia macrocycles (L₂, ortho-; L₃, meta- and L₄, para-isomer) and their structure related open-chain compound (L₁) towards Ag(I) picrate have been examined. From the plot of log (D_Ag(I)/[pic⁻]) vs. log [L]₀ for all of the ionophores were linear with slope near unity, thereby confirming the 1:1:1 complex formations of Ag(I)/ligand/picrate ion to be extracted into the dichloromethane phase. The extractability of an acyclic ionophore was superior to those of the corresponding cyclic ones. In membrane transport experiments, the slow rate of release of Ag(I) from the membrane into the receiving phase seems to be responsible for lower transport efficiency. Upon addition of sodium thiosulfate as a stripping reagent in receiving phase, the efficiency of transport is significantly enhanced in the order of L₁ (acyclic)>L₂ (ortho-)>L₃ (meta-)>L₄ (para-) in accordance with those of log K_ex values. It is hypothesized that the ion-pair complexation of L₁ in extraction step would be more favorable in extraction and transport of Ag(I). Its structure have been confirmed by X-ray diffraction analysis of [Ag(L₁)pic], where L₁=1,10-bis(mercaptobenzylyl)-4,7-dioxadecane.     

Formation and characterization of mixed polyelectrolyte–surfactant Langmuir layer templates for silver nanoparticle growth

The hydrophilic characteristic of the polyelectrolyte, poly(4-styrenesulfonic acid) (PSS), was modified by associating with the surfactant, dodecyltrimethylammonium bromide (DTMAB), to form polyelectrolyte–surfactant (PSS–DTMA) Langmuir layers at air/liquid interfaces. The interfacial behavior of the PSS–DTMA complexes was investigated with the Langmuir trough technique. The mixed PSS–DTMA Langmuir layers were then used as the two-dimensional templates to incorporate with silver precursors from the subphase, and were transferred onto mica substrates with the Langmuir–Blodgett (LB) deposition technique. The silver nanoparticles were fabricated in the resulting LB films with UV irradiation, and the morphology of the silver nanoparticle structures was analyzed by atomic force microscopy (AFM). The results indicated that increasing the DTMA⁺ content in the mixed PSS–DTMA system would enhance the hydrophobic characteristic of the complexes and then form stable PSS–DTMA Langmuir layers at interfaces. In addition, by varying the DTMA⁺ content, one could adjust the charge density in the Langmuir layer templates and thus control the association behavior between the two-dimensional templates and the silver precursors in the subphases. The AFM images demonstrated that the formation of the silver nanoparticle structures in the UV-treated LB films could be regulated with the DTMA⁺ content in the Langmuir layer templates. It is inferred that the polyelectrolyte–surfactant template offers a potential of designing structures of polyelectrolyte–nanoparticle materials with a template-synthesis procedure.