Impact of Transition Metal Substituents on Polysilane Properties: Iron versus Ruthenium

Summary. The previously unknown ruthenio disilanes Rp–Si₂Me₄–C₆H₄X (Rp = η⁵-C₅H₅Ru(CO)₂; X = H, Br, –CHO, CH=C(CN)₂) were synthesized from ClSi₂Me₄C₆H₄X (X = H, Br) and Rp⁻ using conventional chemical methods. Trends in the UV/Vis absorption spectra indicate strong electronic coupling within the Rp–Si–Si–C_aryl fragment and, therefore, closely resemble the ones observed for the corresponding iron complexes. The four compounds however, were shown to be less sensitive towards UV irradiation. The crystal structure of Rp–Si₂Me₄–C₆H₄CH=C(CN)₂ was determined by X-ray diffraction and exhibits an all-trans-array of the Ru–Si–Si–C_aryl moiety, what is a basic requirement for optimal through-bond interaction.     

Stainless steel capillary columns for high temperature gas chromatography

A layer of elemental silicon has been deposited on the surface of stainless steel tubing by means of chemical vapor deposition (CVD). Two kinds of capillary column were prepared from the deactivated tubing: cross-linked, silanol-terminated polydime-thylsiloxane wall coated open tubular (WCOT) columns and molecular sieve 13X porous layer open tubular (PLOT) columns. Unlike fused silica capillary columns, stainless steel WCOT and PLOT columns can be operated at temperatures in excess of 400°C. High temperature simulated distillation has been performed successfully with a macro bore WCOT column and rapid PNA (paraffin, naphthene, and aromatic) analysis with a multidimensional gas solid chromatographic (GSC) system using PLOT columns.     

Environment of the P b center at the Si(111)/oxide interface

We assess several models for the environment of the P _b center (Si dangling bond center) at the interface of Si(111) with its oxide. The comparison of hyperfine constants observed with those predicted using large cluster models favors a local structure in which there is an Si-Si bond within the oxide close to the Si dangling bond. Such Si-Si bonds are also suggested by a number of other experiments and are consistent with the reactive layer model proposed to rationalize a range of oxidation studies.     

高分子气体分离膜材料的化学结构与气体透过性能之间的关系

本文以硅橡胶和聚酰亚胺为基础,从高分子的化学组成、分子链段的运动能力、侧基的大小及其作用等几个方面,讨论了聚合物的化学结构对其均质膜的气体选择透过性能的影响,以溶解扩散过程对气体分离膜材料的透气行为进行了剖析,井简述高分子化学结构对其成膜时结晶情况的影响及对气体透过的作用;还概述了气体分离膜科学发展的历史以及基本原理.     

原子吸收光谱法测定拉伸断口铬镍钼钛钢样品中主成分

研究了毫克级铬镍钼风样品中主成分镍的火焰原子吸收光谱法（FAAS法）和铬、钼、钒、钛、铝的塞曼恒温平台石墨炉原子吸收光谱法（ZSTPF－AAS法）。采用了微波溶样技术作为防污染样品预处理技术，采用石墨管硅涂层改进技术提高了仪器的测试精度。其中铬、镍、钼、钒、钛、铝的相对标准偏差分别为2.7%,0.97%,8.6%,7.3%,1.7%,7.3%。其加标回收率分别为96.5%,97%,96.7%,93%,98%,91%。通过分析，发现在较低温度下铬镍钼钛钢断面上有轻微的钼偏析现象，可能是拉伸断裂的主要化学影响因素。     

A flow injection-ETAAS system for the on-line determination of total and dissolved silica in waters

In this work total (Si-tot) and ‘soluble’ or reactive (Si-sol) concentrations of silicon in natural and tap waters were sequentially determined by electrothermal atomic absorption spectrometry (ETAAS). First, samples were on-line diluted based on the merging-zone principle in order to allow the determination of Si-tot within the 300–1000 μgSi l⁻¹ range. After the dilution process, a sub-sample was collected in the capillary of a sampling arm assembly (SAA). Thereafter, samples were subject to a precipitation/dissolution process in order to allow the determination of Si-sol within the 280–850 μgSi l⁻¹. Si-sol was precipitated with ammonium chloride and collected on the walls of a knotted coil. The precipitate was dissolved with ammonium molybdate in an acidic medium (HNO₃) and a sub-sample was then collected in the SAA. In both cases, 10 μl volumes of the sub-sample were injected into the atomizer with the previous introduction of 20 ng of Eu as chemical modifier (10 μl) by the spectrometer autosampler. The recovery values obtained with natural waters spiked samples were over 46% and the agreement between observed and certified samples values was good. The proportion of Si-sol in comparison with the Si-tot was high (85–95%) in most natural waters. The precision of the method was 2.4–3.5 and 4.5–6.2% (n=10) for the determination of Si-tot and Si-sol, respectively.     

一阶导数吸光光度法同时测定纯硅中铁和铝的研究

提出了用一阶导数光光度法同时测定铁和铝的方法，在ｐＨ６．５乙二胺缓冲溶液中，乳化剂ＯＰ存在下，Ｆｅ＾３＋Ａｌ＾３＋与络天青Ｓ形成Ｆｅ＾３＋，Ａｌ＾３＋－ＣＡＳ－ＯＰ三元络合物，络合物一阶导数光谱等吸收点分别在６０６．２，６３８．０ｎｍ记录混合体系在两波长处一阶导数数值可以分别测定铝，铁含量，互不影响，铁，铝含量分别在１．０～１６μｇ／２５ｍｌ，０．３～１０μｇ／２５ｍｌ范围内呈良好线性，用于测定纯     

Novel radial oligothienyl silanes

A series of thiophene-based homologues with a silicon core surrounded by mono-, bi-, terthiophene, and their derivatives with alkylsilyl linkages has been prepared using hydrosilylation and Stille coupling methods.     

氮化硅在超声波辐照下的水解

氮化硅(Si3N4)是近三四十年发展起来的一种新型陶瓷材料,应用广泛[1-3],化学性质特别稳定,一般情况下难以发生反应,鲜有人研究其化学性质。有研究[3]指出氮化硅在磨擦条件下能与水发生如下反应:Si3N4+6H2O→3SiO2+4NH3,但却无人专门定量地研究过氮化硅在水溶液中的反应性能,为此本文研究了氮化硅在超声波辐照条件下的水解情况,并且还和强力搅拌条件下的结果进行了对比。1　实验部分1 1　主要仪器与试剂超声波清洗器(KQ-218型,KQ-250B型,CX-250型,CK-25-06型)BF-101B型磁力搅拌器,72型分光光度计,氮化硅(>99 9%,α Si3N4>95%)…     

一氧化二氮—乙炔火焰原子吸收法测定镍—镉浸渍液中硅

提出用一氧化二氮-乙炔火焰原子吸收法分析镍-镉浸渍液中硅.方法具有良好的灵敏度,干扰少,重现性好.硅量在5～50μg.ml~(-1)范围内与吸光度呈线性关系.测定样品中硅34.0μg.ml~(-1)(n=10)时,相对标准偏差为2.2%.标准加入回收率在98%～103%范围内,适用于镍-镉浸渍液中硅的分析.