Ammonium chloride salting out extraction/cleanup for trace-level quantitative analysis in food and biological matrices by flow injection tandem mass spectrometry

A sample extraction and purification procedure that uses ammonium-salt-induced acetonitrile/water phase separation was developed and demonstrated to be compatible with the recently reported method for pesticide residue analysis based on fast extraction and dilution flow injection mass spectrometry (FED-FI-MS). The ammonium salts evaluated were chloride, acetate, formate, carbonate, and sulfate. A mixture of NaCl and MgSO₄, salts used in the well-known QuEChERS method, was also tested for comparison. With thermal decomposition/evaporation temperature of <350 °C, ammonium salts resulted in negligible ion source residual under typical electrospray conditions, leading to consistent method performance and less instrument cleaning. Although all ammonium salts tested induced acetonitrile/water phase separation, NH₄Cl yielded the best performance, thus it was the preferred salting out agent. The NH₄Cl salting out method was successfully coupled with FI/MS/MS and tested for fourteen pesticide active ingredients: chlorantraniliprole, cyantraniliprole, chlorimuron ethyl, oxamyl, methomyl, sulfometuron methyl, chlorsulfuron, triflusulfuron methyl, azimsulfuron, flupyrsulfuron methyl, aminocyclopyrachlor, aminocyclopyrachlor methyl, diuron and hexazinone. A validation study was conducted with nine complex matrices: sorghum, rice, grapefruit, canola, milk, eggs, beef, urine and blood plasma. The method is applicable to all analytes, except aminocyclopyrachlor. The method was deemed appropriate for quantitative analysis in 114 out of 126 analyte/matrix cases tested (applicability rate = 0.90). The NH₄Cl salting out extraction/cleanup allowed expansion of FI/MS/MS for analysis in food of plant and animal origin, and body fluids with increased ruggedness and sensitivity, while maintaining high-throughput (run time = 30 s/sample). Limits of quantitation (LOQs) of 0.01 mg kg⁻¹ (ppm), the ‘well-accepted standard’ in pesticide residue analysis, were achieved in >80% of cases tested; while limits of detection (LODs) were typically in the range of 0.001–0.01 mg kg⁻¹ (ppm). A comparison to a well-established HPLC/MS/MS method was also conducted, yielding comparable results, thus confirming the suitability of NH₄Cl salting out FI/MS/MS for pesticide residue analysis.     

Conversion of Oxiranes to Thiiranes Catalyzed with Silica Gel–Supported Aluminium Chloride

Silica gel–supported aluminium chloride, SiO₂‐AlCl₃, catalysizes the efficient conversion of different oxiranes to their corresponding thiiranes in the presence of thiourea under nonaqueous conditions.     

Ultrasonicated Condensation of Indene and 2-Nitrofluorene with Aromatic Aldehydes Catalyzed by bis-(pMethoxyphenyl)telluroxide (BMPTO)

The condensation of indene or 2-nitrofluorene with aromatic aldehydes catalyzed by bis-(p-methoxyphenyl)telluroxide (BMPTO) under ultrasonic wave irradiation gave corresponding fulvenes in fair to good yield.     

Preferential Reactivity of Pyridylmagnesiumchloride with N,N-Dialkyl Arylamides over Carbonitriles: Synthesis of 2-(Aroyl) Pyridines

Reaction of 2-pyridylmagnesium chlorides with N,N-dialkyl arylamides afford exclusively 2-(aroyl) pyridines in high yields and purity without the formation of any tertiary alcohol. This method employs easily available raw materials and avoids the use of hazardous lithium reagents and cryogenic conditions. Further, preferential reactivity of this Grignard reagent with N,N-dialkyl arylamides over its carbonitrile counterparts offers a variety of 2-(aroyl) pyridines including the ones containing carbonitrile groups on the aryl ring.     

Iron(III) Chloride–Promoted Direct Conversion of Aryl/Alkyl Cyanides to Esters

Aryl/alkyl cyanides were quickly converted into the corresponding esters in the presence of iron(III) chloride in refluxing alcohols with very good yields.     

Excellent Synthesis of Adipic Acid

Abstract

A simple, straightforward, and environmentally benign protocol for the synthesis of adipic acid from oxidation of cyclohexanone with Oxone® in the presence of 0.5 mol% RuCl₃ · nH₂O is reported. The reaction completes within a very short time even at room temperature. The generality of the method is shown successfully for synthesis of other C-5 to C-8 dicarboxylic acids.     

Choline Chloride/Urea Ionic Liquid Catalyzed a Convenient One-Pot Synthesis of Indole-3-propanamide Derivatives

A sequential three-component reaction of aromatic aldehydes with Meldrum's acid and N-methyl indole in the presence of choline chloride/urea ionic liquid as green catalyst has been described. In this one-pot multicomponent reaction, a series of indole-3-propanamide derivatives were synthesized with good to excellent yields. This methodology shows several advantages including fast reaction, easy isolation, operational simplicity that make it a useful and attractive option for the library generation of indole-3-propanamides (5a–l) for drug discovery.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resources: Full experimental and spectral details.]     

A silver(I)-catalyzed reaction of 2-alkynylbenzaldoxime with arylsulfonyl chloride

A silver-catalyzed reaction of 2-alkynylbenzaldoxime with arylsulfonyl chloride proceeds smoothly at room temperature to afford 4-tosyloxyisoquinolines in moderate to good yields. Additionally, the resulting 4-tosyloxyisoquinolines could be further elaborated through palladium-catalyzed coupling reactions leading to diverse isoquinolines.     

Novel domino reactions for the efficient synthesis of 5,6-dihydro-1,4,2-oxathiazines

A facile efficient synthesis of novel 3-aryl-5,6-dihydro-1,4,2-oxathiazin-6-ols from the reaction of (E)-N-hydroxyarylimidoyl chlorides and 1,4-dithiane-2,5-diol in the presence of triethylamine is described. This transformation presumably proceeds via in situ generation of 2-mercaptoacetaldehyde and nitrile oxide and their concomitant [3+3] annulation.     

Use of TLC-Densitometric Method for Determination of Valproic Acid in Capsules

Determination of valproic acid in the drug was carried out on the aluminum silica gel 60F₂₅₄ plates and using acetone–water–chloroform–ethanol–ammonia at a volume ratio of 30:1:8:5:11 as the mobile phase, respectively. Two methods of detection of valproic acid were used. The first was a 2% aqueous CuSO₄×5H₂O solution, and the second was a 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system. The applied TLC-densitometric method is selective, linear, accurate, precise, and robust, regardless of the visualizing reagent used for the determination of valproic acid in Convulex capsules. It has low limits of detection (LOD) and limits of quantification (LOQ), which are equal to 5.8 μg/spot and 17.4 μg/spot using a 2% aqueous CuSO₄×5H₂O solution as visualizing agent and also 0.32 μg/spot and 0.97 μg/spot using a 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system as visualizing reagent, respectively. The described analytical method can additionally be used to study the identity of valproic acid in a pharmaceutical preparation. The linearity range was found to be 20.00–80.00 μg/spot and 1.00–2.00 μg/spot for valproic acid detected on chromatographic plates using a 2% aqueous CuSO₄×5H₂O solution and the 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system, respectively. A coefficient of variation that was less than 3% confirms the satisfactory accuracy and precision of the proposed method. The results of the assay of valproic acid equal 96.2% and 97.0% in relation to the label claim that valproic acid fulfill pharmacopoeial requirements. The developed TLC-densitometric method can be suitable for the routine analysis of valproic acid in pharmaceutical formulations. The proposed TLC-densitometry may be an alternative method to the modern high-performance liquid chromatography and square wave voltammetry in the control of above-mentioned substances, and it can be applied when other analytical techniques is not affordable in the laboratory.