Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Direct coupling of capillary supercritical fluid chromatography with double-focusing high resolution mass spectrometry

An integral restrictor interface with jet separator for coupling capillary column supercritical fluid extraction – supercritical fluid chromatography with high resolution mass spectrometry (SFE-SFC-MS) has been built and used for the analysis of a fatty acid ester, and of polymer additives with a wide range of masses. The mobile phase used was supercritical carbon dioxide; a flame ionization detector (FID) was used in parallel with the mass spectrometer. Different SFC-MS interface operating conditions, e.g. temperature, restrictor position, flow rate, and sample transfer conditions were optimized to obtain good sensitivity and separation for these applications. In addition, the sensitivity of measurements performed with the direct insertion probe and by SFC-MS interface have been compared.     

Studies on separation mechanisms of biological molecules on a polyvinyl alcohol column

Summary The chromatographic separation mechanism on a polyvinyl alcohol (PVA) column in aqueous systems was explored utilizing several different types of compound such as polyethylene glycols, carbohydrates, pyrimidine and purine bases, fatty acids, monophosphate nucleotides and glycyl-peptides. Two types of separation mechanisms were found to occur for these substrates. The polyethylene glycols and the carbohydrates were eluted by size-exclusion chromatography. The retention behavior of the other substrates could be explained by the solvophobic theory, suggesting that the predominant separation mode was reversed-phase chromatography. The occurrence of reversed-phase chromatography was also indicated by the remarkable effect of the addition of ion-association reagents to the chromatographic system on the retention of the monophosphate nucleotides.     

High performance liquid chromatographic studies on lanthanides, uranium and thorium on amide modified reversed phase supports

The retention behavior of uranium, thorium and lanthanides has been investigated with amide modified reversed phase C₁₈ supports using α-hydroxy isobutyric acid (α-HIBA) as the mobile phase. Four structurally different amide moieties namely, 4-hydroxy-N,N-dihexyl butyramide (4HHBA), 4-hydroxy-N,N-di-2-ethylhexylhexanamide (4HEHHA), bis(N,N,N′,N′-2-ethylhexyl)malonamide (B2EHM) and N-methyl-tris(dihexylcarbamoyl-3-methoxy)pivolamide (MTDCMPA) have been synthesized and studied. Among the various amide coated columns, the supports modified with 4HHBA, B2EHM and MTDCMPA exhibit an interesting retention for uranium and thorium, which is different from 4HEHHA modified support. The retention time for uranium and thorium increases with increasing amide concentration for 4HHBA, B2EHM and MTDCMPA supports, while the same decreases with increasing 4HEHHA content. However, the separation factor for uranium and thorium is greater on a 4HEHHA support, compared to an unmodified C₁₈ column, reflecting the amide's preferential complexation of uranium over thorium.Columns modified with 4HHBA, B2EHM and MTDCMPA exhibit relatively higher retentions for lanthanides. However, MTDCMPA modified support shows a different elution profile for lanthanides compared to 4HHBA, and B2EHM modified columns. Individual separations of heavier lanthanides, i.e., from gadolinium to lutetium also have been achieved using 4HHBA and B2EHM modified supports.The influence of modifier content, mobile phase concentration and its pH on the retention of metal ions has also been studied. Based on these investigations, an efficient high performance liquid chromatographic method (HPLC) has been developed for the rapid separation of uranium from thorium as well as for the individual separation of heavier lanthanides.     

One-Step Synthesis of Monolithic Silica Nanocomposites in Fused Silica Capillaries

The ideal way to prepare efficient, yet robust stationary phases for microanalytical high-resolution methods such as capillary chromatography and electrochromatography remains to be defined. In this contribution a one step sol-gel process is proposed for the production of monolithic, macroporous nanocomposite phases in fused silica capillaries, which require no additional derivatization, since they already bear the interactive (C8) moieties. The effect of the catalyst, the water content, the pH, as well as that of certain additives on monolith formation and porosity is investigated. Volume shrinkage and a tendency to crack were the major obstacles to overcome. Homogeneous stationary phases could be produced by applying a pH gradient during sol formation, thereby changing the catalytic principle from acidic (0.1 M HCl) to basic (gradual formation of OH^– as a consequence of the hydrolysis of N-methylformamide). Gelation/coacervation of suchgels could be induced by the addition of N,N-diethylamine. The water content during sol formation was determined as decisive for pore formation, with 250% of the amount theoretically needed for complete hydrolysis of all precursors giving optimal results. The volume shrinkage problem during xerogel formation was resolved by integrating dialkyldialkoxysilane units (dimethyldiethoxysilane 35 mol%) into the silica network.     

High Performance Liquid Chromatographic Analysis of Pharmaceuticals Using Oil-In-Water Microemulsion Eluent and Monolithic Column

Novel and efficient separations of pharmaceutical substances were achieved using oil-in-water microemulsion eluent and a conventional C18 packing with a flow rate of 1 mL/min⁻¹. Attempts to decrease analysis time was limited due to the high viscosity of the microemulsion which generated relatively high back-pressures. Monolithic columns gave 3-fold lower back-pressures and allowed flow rates of 4 mL/min⁻¹. with the same microemulsion mobile phase which permitted rapid separations to be achieved. Separation of a test-mix of paraben preservatives was achieved in both isocratic and gradient mode in less than 1 min. The monolith-microemulsion combination was applied to rapidly quantitatively analyse two formulated products with excellent linearity, accuracy and repeatability. Quantitative analysis times were under 90 seconds. Successful quantitation of both nicotine lozenges and naprosyn tablets was performed using this approach.     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。