Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.     

The correlation between molecular polarizability of PAHs and their retention data on various stationary phases in reversed-phase HPLC

Summary The equation for the potential energy of interactions established for gas-liquid chromatography has been confirmed in reversed phase liquid chromatography. Equations derived for molecular polarizabilities of PAHs and their retention data have very high correlation coefficients. The results indicate that the inductive effect between solute and stationary phase is the main one and the dispersive effect is very small compared with the inductive effect but its contribution increases with the carbon chain length of the stationary phase.     

Preparation of complex carbon-silica adsorbents with different properties

Summary The surface properties of complex adsorbents prepared through the pyrolysis of benzyl and n-heptyl alcohols and their mixtures on the surface of silica gel were investigated. The reactions were carried out in an autoclave at 500°C. A series of adsorbents having different porous structure, chemical nature of the adsorption centers and their topography were obtained. The best resolution of different mixtures was obtained by the carbon-silica adsorbent prepared through the pyrolysis of n-heptanol.     

Analysis of dinitrofluoranthenes by high resolution capillary gas chromatography/mass spectrometry

This paper reports the retention indices of eighteen of the possible twenty-five dinitrofluoranthene isomers.     

毛细管电色谱中双电层叠加的研究

通过流动相中电解质浓度对毛细管电色谱柱效能的流动相平均线速度的影响，研究了ＣＥＣ中双电层叠加现象。提出选择合适电解质组成的浓度及在制备色谱柱过程中避免细小和破碎的固定相颗粒进入柱中，以有效地减小双电层叠加作用。     

液相色谱专家系统中柱系统推荐规则的建立和验证

把分子结构和分子、离子静电作用力作为影响溶质保留值和选择性的基本点,提出了液相色谱专家系统柱系统推荐的基本规则,由此可以从溶质所包含的基团或官能团的信息进行色谱柱系统推荐。为了验证这些规则的正确性,应用几类常用的或典型的样品从分子结构通道进行液相色谱柱系统推荐,获得满意的结果。     

醋酸十二铵的吸附和SiO2悬浮液的稳定性

（1）测定了醋酸十二烷基铵（DAA）在CAB－O－SIL上的吸附，其等温线属双平台或LS型[1－3，5]；（2）NaCl的存在使DAA的吸附增加．但不影响其低浓度下第一平台的吸附量；HCl的存在则在全浓度范围内抑制了DAA的吸附，（3）测定了CAB－O－SIL颗粒在上述各溶液中的悬浮液的稳定性；（4）根据表面形成小胶团的吸附理论（即二步模型产）[2，3，5，]，并借助电导跟踪溶液中发生的变化，满意地解释了吸附和聚沉的实验结果．     

气相毛细管柱切割-反吹技术及归一化法分析汽油中的芳烃(英文)

 发展了一种采用毛细管气相柱切割 反吹技术分析汽油中芳烃的方法。利用强极性毛细管预柱将芳烃保留至n C10 的脂肪族化合物之后 ,并将其反吹到非极性毛细管柱中按沸点详细分离分析。该方法使预柱先流出的组分和分析柱流出的组分通过一个微型三通进入同一检测器中 ,因此可用归一化方法定量分析汽油中的芳烃。该方法可在 15min内完成汽油中苯至C10 芳烃的分析 ,结果的相对标准偏差 (RSD)≤ 3% ,切割误差为± 5s时分析结果的RSD≤ 4 %。     

丙烯腈中微量有机杂质的测定

本文采用ＸＥ－６０交联弹性石英性细管柱及４０７有机体埴充柱气色谱法可分分析丙烯腈中有机杂质。通过对柱长、担体粒度、液膜厚度、柱温和载气流量的选择。确定出最佳色 谱条件。     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.