The characterization of silica microparticles by electrophoretic mobility measurements

Summary Electrophoretic mobility measurements in the pH 2‐10 range are described for several commercial HPLC silica microparticles and a laboratory-produced product. The content of metal impurities for the silicas was also determined by AAS. An acidic/hydrothermal treatment was used to generate a more homogenous surface for some of the silicas. The zero points of charge (zpc) for both a native and a treated silica plus several commercial HPLC silicas were compared. The electrophoretic mobility method may be useful in predicting the utility of certain types of silica supports for chromatographic separations.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.     

Thin-layer chromatography of 1,2,4-triazoles on silica gel

Summary The TLC behaviour of N-phenyl-1,2,4-triazoles and their derivatives on silica gel plates has been studied using simple solvents. Isomers were very well distinguished, resulting from different activities due to hydrogen bonding. A mixture of seven compounds has been resolved with diethylether-n-butylamine-pyridine (91.4:7.7:0.9).     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

An NMR study of the species produced by the reactions of dialkyl magnesium and HCl with calcined silica and the polymerisation performance of Ziegler-Natta catalysts produced from this support material

The effect of calcinations on the silica surface groups and thereby on the activity of Ziegler-Natta catalysts in ethylene homopolymerisation has been studied. Silica was calcined at different temperatures and treated with MgR₂ and HCl. Silica surface groups were identified by using ¹H MAS NMR and ¹³C and ²⁹Si CP MAS NMR techniques. Magnesium, titanium and chlorine were measured by elemental analysis. Ziegler-Natta catalysts were prepared from these supports and subsequently used in ethylene homopolymerisation. Maximum activity was obtained with the catalyst based on 590 °C calcined silica. The results indicate that MgR₂ reacts with siloxane-groups (Si-O-Si) in the 300 °C calcined silica, leaving the hydrogen-bonded hydroxyl-groups unreacted. Low activity Si-O-Ti(Cl)₂-O-Si species are formed after reacting with TiCl₄. The higher activity in the catalyst based on 590 °C calcined silica can be explained by the formation of -Si(R)-O-Si-O-TiCl₃ groups, originating from the siloxane bridges which cannot form in 300 °C calcined silica. Other explanations for the higher activity are a higher Mg/Ti ratio or small amounts of crystal water formed in the 590 °C calcined silica.     

Structure inhomogeneities of medium-range order in fluorozirconate glasses

Images of cleaved surfaces were obtained for 53ZrF₄-20BaF₂-4LaF₃-3AlF₃-20NaF (ZBLAN) glasses and fused quartz using an NTMDT atomic force microscope. It is shown that the scatter of particle size depends on the cooling rate and is 21–48.5 Å for the cleaved surface of ZBLAN glass obtained by very fast cooling and 68–172 Å for the cleaved surface of ZBLAN after slow cooling. For cleaved fused quartz, the range is 25-18 Å.     

Chemical modification of silica surface by immobilization of functional groups for extractive concentration of metal ions

Increased utilization of mechanically stable synthetic matrices particularly silica gel as a solid support and its surface modification either by impregnation of organic ligands directly or covalent grafting through spacer unit for extractive concentration of trace elements are highlighted in the present article. Experimental evidences for existence of surface silanol and its chemical nature have explored the idea of silica surface modification. Recent methods of development in functionalized silica synthesis by attachment of various ligands or organic reagents to the silica surface and techniques of characterization of the modified surface have been reported. Analytical applications of various modified silica surfaces, in particular, adsorption of trace elements taking separation and preconcentration into account from complex synthetic mixture as well as natural water is presented.     

EXAFS studies of cobalt oxides and oxide glasses

The exafs of Co²⁺ has been studied in rare earth cobaltites and in sulphate and borate glasses. It has been found that the environment of Co²⁺ ions is very similar in these cases. It appears feasible to study local structures in glasses using probe ion exafs. Communication No. 151 from the Solid State and Structural Chemistry Unit.     

Solvent-free Mukaiyama aldol reaction of O-silyl dienolates catalyzed by benzoic acid

The vinylogous aldol reaction of O-silyl dienolates deriving from 2,2-dimethyl-[1,3]-dioxin-4-ones proceeds in moderate to excellent yields in the presence of catalytic amounts of PhCOOH under solvent-free conditions. Modest to good yields can be obtained by using silica gel or 3 Å molecular sieves as heterogeneous catalysts.     

FT-EPR Spectroscopic Study of Silicophosphate Glasses Derived from Gels

(100-x) mole% SiO₂-x mole% P₂O₅-glasses withx=1–9 have been prepared by the sol-gel process using tetraethylorthosilicate and triethylphosphate as precursors. The gels were fired at various temperatures up to 950°C and then exposed to γ-ray irradiation to induce paramagnetic centers. CW-EPR and FT-EPR Spectroscopies were employed at temperatures between 4 and 300 K in order to determine the resulting structures. The dried gels exhibited four types of O ₂ ⁻ -ions trapped in pores of different sizes. The gels fired atT=670°C exhibited theE’ ₁-center and non-bridging oxygen as a results of the fracture of the Si-O-Si bonds. At higher temperatures, the spectra of the POHC, POHC ^b ,E’, and CH ₃ ⁻ -centers have been detected that are a function ofx andT.