Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

The characterization of silica microparticles by electrophoretic mobility measurements

Summary Electrophoretic mobility measurements in the pH 2‐10 range are described for several commercial HPLC silica microparticles and a laboratory-produced product. The content of metal impurities for the silicas was also determined by AAS. An acidic/hydrothermal treatment was used to generate a more homogenous surface for some of the silicas. The zero points of charge (zpc) for both a native and a treated silica plus several commercial HPLC silicas were compared. The electrophoretic mobility method may be useful in predicting the utility of certain types of silica supports for chromatographic separations.     

A simple direct enzyme immunoassay of antibodies based on the differences in diffusion rates in a gel of a synthetic antigen and of its complex with antibodies

A simple direct enzyme immunoassay for semiquantitative detec tion of antibodies is suggested. It is based on the difference in diffusion rates in a gel for a synthetic low-mol-wt antigen and of its complexes with antibodies to be detected. Sensitivity and specificity of the devel oped assay are equal to an ELISA method. The assay has been tested with antibodies against HIV protein gp41 in rabbit serum. Possible applications and limitations of the method are discussed.     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Preparation and characterization of silica—polyimide composite membranes coated on porous tubes for CO2 separation

Silica-polyimide microcomposite membranes were prepared on γ-alumina-coated α-alumina support tubes, and their gas permeation properties were evaluated with He, N₂ and CO₂. Smoothing of the substrate surface and hybridization of silica and polyamic acid were both effective to form defect-free thin composite membranes. The CO₂ permeance of a membrane with a silica content of 68 wt% was one order of magnitude higher than that of a polyimide membrane having the same thickness. The permselectivity of CO₂ to N₂ was 30 at 30°C and 13 at 100°C. Contributions of the silica and polyimide phases to permeance of the composite membrane were analyzed with a two-phase permeation model. The effective thickness of the rate-controlling polyimide phase was less than one-tenth of the total thickness of the silica-polyimide membrane.     

Development of aryl-containing dipyrrolyldiketone difluoroboron complexes (BONEPYs): Tune the hydrogen bond o–CH···F for fluoride recognition

Dipyrrolyldiketone difluoroboron complexes (BONEPYs) were synthesized by condensation of the corresponding pyrroles and malonyl chloride followed by treatment with BF₃·OEt₂. The aryl-substituted pyrrole is introduced to form a cyclic system in order to investigate anion binding studies. In BONEPYs 1–3 the o-H of the aryl group forms hydrogen bonding with F⁻ to give a more table complex. In contrast, the intramolecular hydrogen-bonded BONEPY endo-4 is more stable than its exo isomer. While adding F⁻, the hydrogen bonds must be broken first to give 4·(3)F⁻. Owing to the electron-rich group (-OMe), the o-H of the phenyl group can hardly interact with F⁻ via hydrogen bonding to give the less stable complex 4·(5)F⁻. The energy differences between the different conformations were calculated using DFT methods, which is consistent to the experimental observations.     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Study on the Anion Recognition Properties of Synthesized Receptors （Ⅲ）： Convenient Synthesis and Anion Recognition Property of Bisthiosemicarbazone Derivative

A new series of bisthiosemicarbazone derivative receptors(1,2 and 3)have been synthesized by simple steps ingood yields.Their anion recognition properties were studied by UV-Vis and ~1H NMR spectroscopy.The resultshowed that the receptors 1,2 and 3 all had a better selectivity to F~-,CH_3COO~- and H_2PO_4~-,but no evidentbinding with Cl~-,Br~-,I~-,NO_3~- and HSO_4~-.Upon addition of the three anions to the receptors in DMSO,thesolution acquired a color change from colorless to dark yellow that can be observed by the naked-eyes,thus the re-ceptors can act as fluoride ion sensors even in the presence of other halide ions.The data showed that it was regularthat the three receptors had different binding ability with the three anions.For the same anion,the association con-stants followed the trend:receptor 1>3>2.The UV-Vis data indicates that a 1:1 stoichiometry complex isformed through hydrogen bonding interactions between compound 1,2 or 3 and anions.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.