Velocity spectrum for non-Markovian Brownian motion in a periodic potential

Non-Markovian Brownian motion in a periodic potential is studied by means of an electronic analogue simulator. Velocity spectra, the Fourier transforms of velocity autocorrelation functions, are obtained for three types of random force, that is, a white noise, an Ornstein—Uhlenbeck process, and a quasimonochromatic noise. The analogue results are in good agreement both with theoretical ones calculated with the use of a matrix-continued-fraction method, and with the results of digital simulations. An unexpected extra peak in the velocity spectrum is observed for Ornstein-Uhlenbeck noise with large correlation time. The peak is attributed to a slow oscillatory motion of the Brownian particle as it moves back and forth over several lattice spaces. Its relationship to an approximate Langevin equation is discussed.     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

基于TMS320C5410EVM板的IIR数字滤波器的设计

本文研究DSP中的IIR数字滤波器的原理和用MATLAB在TMS320C5410EVM中设计IIR数字滤波器的过程和设计方法以及程序的调试方法。     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

Sequential Estimation of the Parameters in a Trigonometric Regression Model with the Gaussian Coloured Noise

This paper considers the estimation problem for a trigonometric regression model with the noise specified by the Ornstein–Uhlenbeck process with unknown parameter. We propose a sequential procedure which ensures a prescribed mean square precision uniformly in the nuisance parameter. The asymptotic behaviour of the procedure duration mean has been studied. This revised version was published online in August 2006 with corrections to the Cover Date.     

HREELS signal processing via wavelets

In spectroscopy, the recorded spectra can often be modelled as the noisy convolution product of an instrumental function with the ‘true’ signal to be estimated. Such models have often been used for high‐resolution electron energy‐loss spectroscopy (HREELS). In this article, a new method is suggested to estimate the ‘true’ HREELS signal, i.e. the original electronic diffusion function with ‘true’ peak intensities. Our method relies upon the use of wavelets that, because they exhibit simultaneous time and frequency localization, are well‐suited for signal analysis. Firstly, a wavelet shrinkage algorithm is used to filter the noise. This is achieved by decomposing the noisy signal into an appropriate wavelet basis and then thresholding the wavelet coefficients that contain noise. This algorithm has a particular threshold related to frequency and time. Secondly, the broadening due to the instrumental response is eliminated through a deconvolution process. This step mainly rests on the existing relation between the Lipschitz regularity of the signal and the decay with scale of its wavelet coefficients and on least squares. The efficiency of this technique is highlighted by comparing the results obtained with those provided by other published methods. This work is the second in a series of three papers in this issue. The first one presents background knowledge on the wavelets required to understand the estimation methods. The third paper explores the application of wavelet filtering and deconvolution techniques to x‐ray photoelectron spectroscopy. Copyright © 2004 John Wiley & Sons, Ltd.     

Relative intensity noise of mode-locked fiber grating external cavity semiconductor lasers

The noise of hybrid soliton pulse source (HSPS) with linearly chirped Gaussian apodized fiber Bragg grating is analyzed by couple-mode equations including spontaneous emission noise when the HSPS is mode-locked. Relative intensity noise is calculated using numerical solutions of these equations. It is shown that transform limited pulses are generated over a wide tuning range around the fundamental mode-locking frequency with low spontaneous noise. However, a high noise level affects the operation of device, and therefore transform-limited pulses are not obtainable over a wide tuning range. It is also shown that noise is extremely sensitive to the RF and DC currents, linewidth enhancement factor, gain saturation parameter and spontaneous coupling factor.     

奇偶相干态的Wehrl熵和Shannon熵

研究了奇、偶相干态的Ｗｅｈｒｌ熵和Ｓｈａｎｎｏｎ熵，结果表明，其Ｗｅｈｒｌ熵随总噪声的增加而增大，并趋向同一个常数。Ｓｈａｎｎｏｎ熵随力学量起伏的减小而减小，且这两种态的Ｓｈａｎｎｏｎ熵均可小于相干态的Ｓｈａｎｎｏｎ熵，但这时并不与压缩效应的出现相对应，因而Ｓｈａｎｎｏｎ熵不能成为压缩存在的判据。     

调制不稳定性对级联放大光纤传输系统信噪比的影响

在考虑光纤损耗和级联放大器的情况下，推导了调制不稳定性的产生条件和增益的普适解析表达式，分析了调制不稳定性对信噪比的影响，给出了一个新的计算信噪比的表达式。     

Flicker noise in degenerately doped Si single crystals near the metal-insulator transition

In this paper we report some of the important results of experimental investigations of the flicker noise near the metal-insulator (MI) transition in doped silicon single crystals. This is the first comprehensive work to study low-frequency noise in heavily doped Si over an extensive temperature range (2 K<T<500 K). The measurements of conductance fluctuations (flicker noise) were carried out in the frequency range 10⁻²<f<4 × 10¹ Hz in single crystalline Si across the MI transition by doping with phosphorous and boron. The magnitude of noise in heavily doped Si is much larger than that seen in lightly doped Si over the whole temperature range. The extensive temperature range covered allowed us to detect two distinct noise mechanisms. At low temperatures (T<100 K) universal conductance fluctuations (UCF) dominate and the spectral dependence of the noise is determined by dephasing the electron from defects with two-levels (TLS). At higher temperatures (T>200 K) the noise arises from activated defect dynamics. As the MI transition is approached, the 1/f spectral power, typical of the metallic regime, gets modified by the presence of discrete Lorentzians which arise from generation-recombination process which is the characteristic of a semiconductor.