Effect of Cr on the wetting in Cu/graphite system

The isotherm wetting and spreading behaviors of the molten Cu-Cr alloys with 0.5, 1.0 and 2.0 at.% Cr on porous graphite substrates were investigated at 1373 K in a flowing Ar atmosphere using a modified sessile drop method. The wettability improves with increasing Cr content in the alloy as a result of phase transition from Cr₃C₂ to more wettable and metallic-like Cr₇C₃ developed at the interface. The spreading kinetics are controlled by the interfacial reaction in the early stage and the diffusion of Cr from the drop bulk to the triple junction in the later stage together with a transition in the intermediate stage.     

Electronic properties of austenite and martensite Fe-9%Mn alloys

We calculate the electronic properties of austenite and martensite Fe-9%Mn alloys using the self consistent full-potential linearized-plane-wave method under the generalized gradient approximation full lattice relaxation. By minimizing total-energy, the lattice constants in their ground states were determined. We discuss the total energy dependence of the volume, and density of states (DOS).      

Hydrogen adsorption on Mo1−xRex(110) (x=0–0.25) surfaces

The effects of adsorbed H on the Mo_1−xRe_x(110), x=0, 0.05, 0.15, and 0.25, surfaces have been investigated using low-energy electron diffraction (LEED) and high-resolution electron energy loss spectroscopy (HREELS). For the x=0.15 alloy only, a c(2×2) LEED pattern is observed at a coverage Θ0.25 ML. A (2×2) pattern is observed for H coverages around Θ0.5 ML from surfaces with x=0, 0.05, and 0.15. Both c(2×2) and (2×2) patterns are attributed to reconstruction of the substrate. At higher coverages, a (1×1) pattern is observed. For the alloy surface with x=0.25, only a (1×1) pattern is obtained for all H coverages. Two H vibrations are observed in HREELS spectra for all Re concentrations, which shift to higher energies at intermediate coverages. Both peaks exhibit an isotopic shift, confirming their assignment to hydrogen. For Re concentrations of x=0.15 and higher, a third HREELS peak appears at 50 meV as H (D) coverage approaches saturation. This peak does not shift in energy with isotopic substitution, yet cannot be explained by contamination. The intrinsic width of the loss peaks depends on the Re concentration in the surface region and becomes broader with increasing x. This broadening can be attributed to surface inhomogeneity, but may also reflect increased delocalization of the adsorbed hydrogen atom.     

Adsorption of Pb on NiAl(1 1 0): energetics and structure

The adsorption of Pb onto a NiAl(1 1 0) single crystal surface at 300 K has been studied by Auger electron spectroscopy (AES), Low energy electron diffraction (LEED), molecular beam/surface scattering and single crystal adsorption calorimetry (SCAC). AES indicates a Stranski-Krastanov growth mode, i.e., Pb initially grows on NiAl(1 1 0) two-dimensionally until the first layer completes at 0.89 ML, where a superstructure is observed by LEED, followed by 3D islanding. Measurements of the Pb gas that does not stick indicate that Pb sticks on NiAl(1 1 0) with an initial probability of 0.99. The initial heat of adsorption of Pb on NiAl(1 1 0) is 249 ± 10 kJ/mol. Due to the repulsive interactions between Pb adatoms, the heat of adsorption decreases within the first layer to a value identical to the heat of sublimation of bulk Pb (195 kJ/mol), where it remains at higher coverages. This first application of adsorption calorimetry on such a thick sample (75 μm versus 0.2-8 μm previously) demonstrates that adsorption calorimetry can be extended to a wider range of surfaces, since this thickness can be achieved with nearly any single crystal material by simple mechanical thinning.     

Attractors for a Three-Dimensional Thermo-Mechanical Model of Shape Memory Alloys

Abstract In this note, we consider a Frémond model of shape memory alloys. Let us imagine a piece of a shape memory alloy which is fixed on one part of its boundary, and assume that forcing terms, e.g., heat sources and external stress on the remaining part of its boundary, converge to some time-independent functions, in appropriate senses, as time goes to infinity. Under the above assumption, we shall discuss the asymptotic stability for the dynamical system from the viewpoint of the global attractor. More precisely, we generalize the paper [12] dealing with the one-dimensional case. First, we show the existence of the global attractor for the limiting autonomous dynamical system; then we characterize the asymptotic stability for the non-autonomous case by the limiting global attractor. * Project supported by the MIUR-COFIN 2004 research program on “Mathematical Modelling and Analysis of Free Boundary Problems”.     

Beyond nanosizing: an approach to shape analysis of fluorescent nanostructures by SMI-microscopy

Using spatially modulated illumination (SMI) light microscopy it is possible to measure the sizes of fluorescent structures that have an extension far below the conventional optical resolution limit (“subresolution size”). Presently, the sizes are determined as the object extension along the optical axis of the SMI microscope. For this, however, “a priori” assumptions on the fluorochrome distribution (“shape”) within the examined fluorescent structure have to be made. Usually it is assumed that the fluorochrome follows a Gauss-distribution or a spherical distribution. In this report we overcome the necessity to make an assumption on the shape of the fluorochrome distribution. We introduce two new experimentally obtained parameters which allow the determination of a shape measure to describe the spatial distribution of the fluorescent dye. This becomes possible by independent measurements with different excitation wavelengths. As an example, we present shape parameter measurements on individual fluorescent microspheres with a nominal geometrical diameter (“size”) of 190 nm. In the case investigated, the experimental shape correlated well with a homogeneous fluorochrome distribution (“spherical shape”) but not with a variety of other “shapes”.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

使用改进的形状优化方法设计高均匀度的超导MRI磁体

针对设计带铁磁的超导磁共振成像磁体,提出了一种确定类的优化算法来优化极靴的形状以达到匀场的目的。这种方法集合了灵敏度分析、形状优化的理论和有限元方法计算非线性铁磁材料极靴的配置,来改善两个极靴之间大体积成像区的磁场均匀度。需要指出的是,本优化方法不受极靴初始形状的限制,均可以快速收敛。我们通过一个紧凑型的1.2T双平面磁共振磁体,展示了这种方法。     

利用电子散斑相移技术测量物体三维面形的方法

为了获得准确的面形测量,提出了一种相移电子散斑干涉技术测量物体面形的测量方法.利用电子散斑干涉产生载波条纹,该载波条纹受到物体表面高度的调制变得弯曲,引起载波条纹相位的变化,可运用相移技术提取物体的相位信息,最后根据高度和相位之间的关系得到物体的面形.介绍了该方法的原理,利用该方法对球冠物体进行了面形测量,证明该方法测量物体面形是可行性的.由于是采用散斑干涉的方法产生干涉条纹,因此该方法测量物体面形具有灵敏度高的优点.