Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

无溶剂研磨条件下四氢苯并吡喃衍生物的一锅法合成

四氢苯并吡喃衍生物在药物和农药研究中有着广泛的用途. 基于合成这类化合物的传统方法所用溶剂多为对环境不利的极性溶剂, 且合成需分步进行, 在提倡绿色化学和发展节约型经济的今天, 如何改良这类反应已成为一个热点. 本工作通过选择不同的碱尝试反应最佳条件, 发现用价廉易得的碳酸钾为碱, 对不同官能团取代的底物芳醛采用研磨的手段, 在无溶剂条件下, 一锅法可成功合成四氢苯并吡喃衍生物. 该法条件温和, 收率高, 易于操作, 对环境影响小.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

High throughput screening of O-glycosylation conditions

We report a novel methodology for rapid and quantitative screening of O-glycosylation reactions of application to the analysis of parallel reaction systems. Our system exploits perdeuterated benzyl (Bn-d₇) ether, and stereoselectivity and yield are evaluated by ¹H NMR and MALDI-TOF MS, respectively. This paper summarizes over 240 screenings of 1 → 3 linkage formation between glucose residues targeting the α-isomer in high yield.     

Sequential extraction of phosphorus in soil and sediment using a continuous-flow system

Distribution and mobility of phosphorus in soil and sediment are usually studied by sequential extraction. In the extraction procedure, a sample is treated with a series of reagents to distinguish the phases to which phosphorus is associated such as carbonate and iron or manganese oxides, etc. There have been a number of extraction schemes presented for phosphorus. At present, all of the existing schemes are carried out batchwise. Phosphorus contents derived from all sequences are operationally defined and depend on experimental conditions.An extraction procedure, which is a continuous-flow-based technique, was recently proposed by our group for metals in soils and sediments. The extraction is carried out in a closed chamber through which extractants are passed sequentially. In this paper, the system was investigated using the extraction scheme of Hieltjes and Lijklema to study distribution of phosphorus in three certified reference materials (CRMs). A number of fractions were collected for each reagent for subsequent colorimetric determination. The results are compared with those obtained from a batch extraction. The summation of phosphorus contents of all phases were compared with the certified values and with the values obtained from total digestion. These results have demonstrated that the continuous extraction system developed is also applicable for fractionation of phosphorus. Advantage and disadvantage are discussed.     

Synthesis of novel fused isoxazoles and isoxazolines by sequential Ugi/INOC reactions

We report the synthesis of novel fused isoxazoles and isoxazolines by employing an unprecedented Ugi/INOC synthetic sequence. The coupling of the Ugi multicomponent reaction with the intramolecular N-oxide cyclization provides access to unique heterocyclic ring systems in two steps from easily available starting materials in moderate to good overall yields.     

Indium (III) Tribromide : An Excellent Catalyst for Biginelli Reaction

A highly efficient catalyst indium (III) tribromide is used to synthesize 5-alkoxy- carbonyl-4-hydrocarbyl-3,4-dihydropyrimidin-2(1H)-ones by a three-component coupling of β-keto ester, aldehydes and urea through improved Biginelli reaction.     

微波溶样肉桂基荧光酮和表面活性剂连续荧光测定葡萄酒中铁和钴

观察到肉桂基荧光酮(略作CF)在pH≈8与Fc(Ⅲ)配位后荧光增强,CPB的加入使荧光更强,络合物与试剂荧光强度之比F_(FeR)/F_R随0～0.01μg/ml Fe(Ⅲ)线性变化,λ_(ex)=410nm,λ_(ex)=480nm;而CF在pH≈10与Co(Ⅲ)配位后荧光却减弱,乳化剂OP存在时使试剂荧光增强,若以荧光熄灭Co(Ⅲ)灵敏度便提高,试剂与络合物荧光强度之比F_R/F_(CoR)对0～0.016 μg/ml Co(Ⅲ)呈直线关系,λ_(ex)=300nm,L_(em)=352nm。控制化学条件和激发、发射波长,可不经分离测定葡萄酒(微波溶样)中铁和钴。     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.