Electrogenerated chemiluminescence of anatase TiO₂ nanotubes film

Highly ordered titanium dioxide (TiO₂) nanotubes film was successfully synthesized via anodic oxidation of a Ti foil in an ammonium fluoride-based ethylene glycol solution. The electrogenerated chemiluminescence (ECL) behavior of the resulting TiO₂ nanotubes film was subsequently studied. Strong ECL emission was observed at −1.40 V (vs. Ag/AgCl) and the ECL spectrum displayed three emission peaks which were bathochromatically shifted by ca. 140 nm as compared to its corresponding photoluminescence (PL) emission peaks, indicating that the surface state plays an important role in the emission process. The ECL emission can also occur in a deareated solution attributing to the surface adsorbed O₂ molecules. The ECL emission intensity was quenched by dopamine and greatly enhanced in the presence of dissolved O₂ and H₂O₂, making it possible to detect these analytes. The TiO₂ nanotubes film has been successfully applied to determine the dissolved O₂ content in river and pond water samples, the H₂O₂ concentration in commercial disinfectant samples and the dopamine concentration in commercial dopamine injections with satisfactory results. The plausible ECL mechanisms of TiO₂ nanotubes film in aqueous solution are discussed.     

Method of gas mixtures discrimination based on sensor array, temporal response and data driven approach

This work presents a method of gas mixtures discrimination. The principal concept of the method is to apply measurement data provided by a combination of sensors at single time point of their temporal response as input of the discrimination models. The pattern data combinations are selected for classes of target gases based on the criterion of 100% efficient discrimination. Combinations of sensors and time points, which provide pattern data combinations in course or repeated measurements, are encoded in the form of addresses. The designer of sensor system is responsible for their selection and they are included in the software of the final instrument. The study of the method involved the discrimination of gas mixtures composed of air and single chemical: hexane, ethanol, acetone, ethyl acetate and toluene. Two sensor arrays were utilized. Each consisted of six TGS sensors of the same type. The dynamic operation of sensors was employed. As an example the stop-flow mode was chosen. The work provides the evidence of the existence of sensor combinations and time points, which are successful in discrimination of studied classes of target gases. The persistence of addresses was discussed considering the ability of sensor array to recognize analytes, variability of repeated measurement results, number of repeated measurements and a twin sets of sensors. Altogether, the validity of the method was demonstrated.     

Synthesis and fluorescence sensing properties of novel pyrene-armed calix[4]arene derivatives

Fluorogenic tert-butylcalix[4]arenes bearing two pyrene pendant groups at the lower rim were synthesized. Based on ratiometric changes of monomer and excimer emissions, the pyrene amine derivative of calix[4]arene has been found to act as a selective sensor for Pb²⁺ and Cu²⁺ ions, respectively, due to a conformational change upon chelation of these ions.     

N~1,N~2-Bis[1-(2-hydroxyphenyl)methylidene]ethanedihydrazide as a neutral ionophore for preparation of a new Ho~(3+) PVC-membrane sensor

N¹,N²-Bis[1-（2-hydroxyphenyl）methylidene]ethanedihydrazide（MEH） was used as new compound which plays the role of an excellent ion carrier in the fabrication of a Ho（Ⅲ） membrane electrode.The electrode shows a good selectivity for Ho（Ⅲ） ion with respect to most common cations including alkali,alkaline earth,transition and heavy metal ions.This electrode has a wide linear dynamic range from 1.0×10^-6 to 1.0×10^-2 mol/L with a Nernstian slope of 19.8±0.3 mV per decade and a low detection limit of 5.8×10^-7 mol/L in the pH range of 2.5-9.8,while the response time was rapid（<10 s）.The suggested sensor was applied to the determination of Ho（Ⅲ） ions in tap water and river water samples.     

Distributed computation of virtual coordinates for greedy routing in sensor networks

Sensor networks are emerging as a paradigm for future computing, but pose a number of challenges in the fields of networking and distributed computation. One challenge is to devise a greedy routing protocol—one that routes messages through the network using only information available at a node or its neighbors. Modeling the connectivity graph of a sensor network as a 3-connected planar graph, we describe how to compute on the network in a distributed and local manner a special geometric embedding of the graph. This embedding supports a geometric routing protocol called “greedy routing” based on the “virtual” coordinates of the nodes derived from the embedding.     

Components of first-countability and various kinds of pseudoopen mappings

Some new classes of pseudoopen continuous mappings are introduced. Using these, we provide some sufficient conditions for an image of a space under a pseudoopen continuous mapping to be first-countable, or for the mapping to be biquotient. In particular, we show that if a regular pseudocompact space Y is an image of a metric space X under a pseudoopen continuous almost S-mapping, then Y is first-countable. Among our main results are Theorems 2.5, 2.11, 2.12, 2.13, 2.14. See also Example 2.15, Corollary 2.7, and Theorem 2.18.     

一种基于网格模型的无限传感器网络K区域覆盖算法

目前无限传感器网络K覆盖问题的解决机制大都有颇为苛刻的假设条件,如要求节点具有很强的能量、节点的感知区域能被精确定义等.提出了一个基于布尔感知理论的分布式网格模型及相应的K区域覆盖算法,能够很好地处理感知区域形状不规则及大小发生变化的K覆盖问题,算法时间复杂度小,适用范围广泛.仿真实验证明了算法的有效性.     

A novel palygorskite-modified carbon paste amperometric sensor for catechol determination

A palygorskite-modified carbon paste electrode (CPE) was constructed using graphite powder mixed with palygorskite particles. Compared with the unmodified CPE, the resulting palygorskite-modified CPE remarkably increases the peak currents of catechol, and greatly lowers the peak potential separation. Therefore, the palygorskite exhibits catalytic activity to catechol and significantly improves the determining sensitivity. The electrocatalytic activity of palygorskite is attributed to its high adsorption capability and the –OH groups on its surface, which plays an important role in the electron transfer between the modified CPE and the catechol in the solution. The sensor shows a linear response range between 5 and 100 μM catechol with a correlation coefficient of 0.998. The detection limit was calculated as 0.57 μM (s/n = 3).     

Description of the response of a fiber optic velocity sensor applied to capillary gas chromatography

This paper explores the response of a novel fiber optics sensor allowing real-time determination of the migration rate of vapor zones in capillary gas chromatography. The sensitivity is related to the gradient of the vapor zone distribution in the capillary and it is highest when vapor zones show steep variations in concentration. The expected linearity between the height of the velocity peaks and the response of a thermal conductivity detector is demonstrated experimentally. The sensor can be used to infer an approximate value of the analyte diffusion coefficient from the time response. Finally, the time evolution of the envelope of the optical signal is explained with experimental evidences.     

Multiplexing Techniques for Noninterferometric Optical Point-Sensor Networks: A Review

This article presents a review of the strategies that have been both demonstrated and proposed for the multiplexing of multiple noninterferometric optical fiber point sensors to form a sensor network. The focus, which avoids consideration of interferometric sensor types, enables discussion of conventional multiplexing tech niques, namely, spatial, time division, frequency division, and wavelength division prior to dealing with combined or hybrid schemes, which exhibit the potential for increased multiplexing gain. Specific advantages and potential drawbacks of the different strategies are provided together with an indication of the number of point sensors that each multiplexing scheme can support.