分子印迹阵列式传感器的研究进展

分子印迹阵列式传感器具有识别率高、选择性好、价格低廉等优点,受到研究者们的极大关注,已经在食品分析、环境分析、药物分析、临床诊断等研究领域中得到应用。分子印迹阵列式传感器是以分子印迹聚合物作为识别元素的集成化传感器,通过各传感单元对分析物响应后产生的特征图谱实现对目标化合物的识别,不仅可用于单一目标化合物的选择性识别,还可以用于多种目标化合物同时存在时的测定。分子印迹阵列式传感器的响应信号机制主要划分为光信号、质量敏感信号和电化学信号等。本文简要介绍了分子印迹技术的产生和发展,重点评述了基于三种信号机制的分子印迹阵列式传感器的研究进展,并展望了分子印迹阵列式传感器的应用前景和研究方向。     

Electrochemical devices obtained from biochar: Advances in renewable and environmentally-friendly technologies applied to analytical chemistry

Biochar is the carbon-rich material produced from organic feedstock such as agricultural wastes and municipal solid waste in limited oxygen atmosphere and under certain thermal combustion. Due to its high carbon content, high cation exchange capacity, large surface and stability structure, it has been applied in different field of knowledge. In relation to environment analytical chemistry the studies about biochar majorly focus in degradation of contaminants and soil and water remediation. However, due to its excellent electrical conductivity, biochar has been also applied to the manufacture of sensitive, robust, efficient and inexpensive devices applied to supercapacitor-based energy storage and chemically modified electrodes or sensors. Therefore, this review describes about obtention, modification and characterization of biochar as well as the pertinent aspects of electrochemical devises based on biochar and a general discussion about the environmental concern of biochar, challenges and prospects.     

基于LabVIEW的超导磁体数采与测控系统研究

根据研制的大口径、高场强的超导强磁装置的特点,选择基于LabVIEW的数据采集和测控系统。低温传感器共六支,分别安装于磁体氦槽和冷屏不同位置,其中碳电阻温度计Cernox三支,铂电阻温度计Pt100两支、Pt1000一只,用于监测磁体温度;超导氦液面计一个,用于监测氦液面高度;根据磁体参数匹配研制了一套可调励磁速率的磁体专用直流电源及其失超保护系统,保证磁体安全运行。所有数据通过NI公司内插DAQ6251数据采集卡的PX I采集,用LabVIEW编写数据采集程序和人机界面。     

光纤光栅腐蚀传感器

提出了一种测量钢筋腐蚀的新型传感器.这种传感器将光纤光栅拉伸后固定在圆形钢筋的表面,在钢筋被腐蚀后,光纤光栅所受到的拉伸应变将被释放,光纤光栅的反射光波长发生变化,通过测量光纤光栅的波长就可以测得钢筋腐蚀程度.这种传感器测量准确度优于±0.1 μm,测量范围约12 μm,可用于混凝土结构中钢筋腐蚀的早期监测.     

声表面波技术检测糜烂性毒剂芥子气的研究

声表面波技术是这些年来得到迅猛发展的一门前沿学科,是传感器技术中引人注目的新兴分支。由于声表面波化学传感器具有体积小、成本低、灵敏度高、易于集成化、智能化、实现远距离检测等多种优点,因而在军用、民用领域显示了良好的应用前景[1-3]。芥子气是糜烂性化学毒剂中最为     

Development of a novel nitrite amperometric sensor based on poly(toluidine blue) film electrode

A novel sensor for the determination of nitrite anion () was fabricated by electrodeposition of toluidine blue. The sensor exhibited good catalytic activity toward the electrochemical oxidation of nitrite. Amperometry was carried out to determine the concentration of . A linear response in the range from 1.0×10⁻⁷ to 1.52×10⁻⁵ M with a substantially low detection limit of 5×10⁻⁸ M (S/N=3) was obtained. The proposed sensor had a feature of high sensitivity of 4.7×10⁵ μA M⁻¹ cm⁻². The possible interference from several common ions was tested. This sensor was applied to the amperometric determination of nitrite in food samples, and the results were consistent with those obtained with the standard spectrophotometric procedure.     

A simple aptamer molecular beacon assay for rapid detection of aflatoxin B1

A simple aptamer molecular beacon assay for rapid detection of aflatoxin B1 (AFB1) was achieved. AFB1-binding induced formation of a hairpin structure and closeness of fluorophore label and quencher probe, causing fluorescence decrease.     

Water-soluble Porphyrin as Temperature Sensor Based on Fluorescent Enhancement

A novel water-soluble porphyrin[5,10,15,20-tetra（3-ethoxy-4-hydroxy-5-sulfonate）phenyl porphyrin, H2TEHPPS] was designed and synthesized, which could be used as a potential fluorescence sensor to detect temperature changes. The studies were performed in solution phase and the concentration of H2TEHPPS was 2.0×10^-5 mol/L. The optical properties of H2TEHPPS were investigated based on the UV and fluorescence spectra. The results show that the fluorescence intensity of H2TEHPPS is directly proportional to temperature in the range of 293-353 K So H,TEHPPS can be used as a molecular temoerature sensor in biomedical and other fields.     

钯纳米粒子修饰的三甲氧苄啶分子印迹膜传感器的制备及其识别性能研究

采用N,N′-亚甲基双丙烯酰胺(MBA)为功能单体、钯纳米粒子为掺杂剂、马来松香丙烯酸乙二醇酯为交联剂,在玻碳电极上热聚合具有三甲氧苄啶(TMP)识别性能的钯纳米材料修饰的分子印迹传感膜.采用扫描电镜及红外光谱对合成的钯纳米材料、印迹传感膜的形貌及其结构进行了表征;采用循环伏安法(CV)、交流阻抗法(EIS)对钯纳米粒子掺杂的印迹电极与无掺杂电极的电化学性能进行了研究.结果表明,纳米粒子掺杂的印迹电极与无掺杂电极的表面形貌及电化学性能明显不同.差分脉冲伏安法(DPV)表征结果表明,TMP的浓度在5.0×10-7~4.0 ×10-3 mol/L范围内与脉冲峰电流呈良好的线性关系(R=0.9995),检出限为3.2×10-8 mol/L (S/N=3).此钯纳米粒子掺杂的印迹传感器具有较高的灵敏度.即时电流测定结果表明,新诺明(SMZ)、磺胺嘧啶(SDZ)、葡萄糖 (Glu)、尿素 (Urea)对三甲氧苄啶(TMP)的测定不产生干扰.将此印迹传感器用于实际样品中TMP的检测,加标回收率为96.8%~102.0%.     

纳米氧化铜修饰的苯巴比妥分子印迹传感器的制备及其电化学性能

为了改善分子印迹传感器的灵敏度,在四丁基高氯酸铵的支持电解质溶液中,以甲基丙烯酸为功能单体,马来松香丙烯酸乙二醇酯为交联剂在纳米氧化铜修饰过的玻碳电极上电聚合了一种苯巴比妥(PB)识别性能的分子印迹传感膜.采用循环伏安(CV)法、差分脉冲伏安(DPV)法及交流阻抗(EIS)法对这种纳米氧化铜修饰过的印迹及非印迹电极的电化学性能进行了研究,结果显示纳米氧化铜修饰过的印迹及非印迹电极的电化学性能完全不同.X射线衍射(XRD)证实纳米粒子为氧化铜.采用扫描电镜(SEM)对纳米氧化铜修饰过的印迹传感器的形貌进行分析,发现纳米氧化铜分散在电极表面,改善了修饰印迹传感器的识别点.差分脉冲伏安法(DPV)表明苯巴比妥的浓度在1.0×10-8-1.8×10-4mol·L-1范围内呈现良好的线性关系(线性相关系数R=0.9994);检出限2.3×10-9mol·L-1(信噪比(S/N)=3).研究结果表明纳米氧化铜修饰过的印迹传感器具有较高灵敏度及选择性.此印迹传感器能用于实际样品中苯巴比妥的检测,加标回收率在95.0%-102.5%.