Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.     

An algorithm for the calculation of the electrostatic repulsion between surface coated with a charge membrane

We propose a numerical procedure for the calculation of the electrostatic repulsion force between two identical, parallel surfaces immersed in anab electrolyte solution. These surfaces are coated with an ion-penetrable membrane carrying fixed charges. The amount of fixed charges is governed by the dissociation of the functional groups in the membrane phase. The effect of pH on the degree of dissociation of these functional groups is taken into account. The difficulty of extensive use of Jacobi elliptic function in the numerical treatment of Poisson-Boltzmann equation can be circumvented by resorting to the present algorithm.     

液膜法处理含氟废水

为了防止含氟废水的污染,人们研究了多种除氟方法,液膜技术是一项新的分离工艺,它操作简单,试剂用量少,有机相可重复利用。本文利用伯胺作迁移载体处理高含量的含氟废水,分离效率较好。 伯胺N_(1923)(简写RNH_2)为流动载体,上胺N_(205)(上海石油化工厂)为表面活性剂,煤油为溶剂。将内相CaCl_2,溶液与油相(含N_(1923)、N_(205)和煤油)按一定体积比例混合,高速搅拌,制成W/O     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

A new biomaterial,hen egg shell membrane,to eliminate heavy metal ion from their dilute waste solution

The egg shell membrane (ESM) is an intricate lattice network of stable and water-insoluble fibers with high surface area. ESM accumulates and eliminates various heavy metal ions from dilute aqueous solution with high affinity and in short contact time, depending on pH and characteristics of the individual ion. Under certain conditions, the level of precious ions, Au, Pt, and Pd accumulation approaches 55, 25, and 22% of dry wt of ESM, respectively. Also uranium uptake 30% of that of ESM. Experiments suggested that ESM is promising to use for the purpose of removal/recovery of metals and water pollution control.     

Beiträge zur Chemie der Pyrrolpigmente, 70. Mitt.: Zum aktiven Transport mit tripyrrinoiden Liganden

The tripyrrin carboxylic acid6 exhibits a pronounced efficiency for carrier mediated proton driven secondary active transport (counter transport) for a series of toxic or valuable cations in a bulk chloroform membrane. In case of Zn⁺⁺ ions the mechanism including complete concentration profiles forNerst diffusion layers and bulk phase have been established. This compound might be used for detoxification or enrichment of precious metals using membrane separation systems.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Theoretical approach and the practice to the evaluation of structural parameters characterizing concentration polarization alongside ion-exchange membranes by means of dielectric measurement

As the application of a dielectric theory proposed previously (J Membrane Sci 64:153–161 (1991)), theoretical formulation and the practical procedure of dielectric analysis are developed to calculate the structural parameters such as the conductivity gradient and the thickness of the concentration polarization layer, the capacitances and the conductances of the two adjoining aqueous phases from the observed dielectric parameters. The procedure of calculation consequent upon the theoretical formulation was applied to double relaxation data observed for cation-exchange membrane systems under application of d.c. bias voltage. As a consequence, the structural parameters of concentration polarization were readily obtained with accuracy.     

Preparation and properties of insoluble films of cyclodextrin condensation polymers

The preparation and properties of smooth and stable films of cyclodextrin polymers are described. The commercially available water soluble prepolymers of-, -, and-cyclodextrin of low molecular masses were crosslinked with glutaric dialdehyde. Side-chain unreacted aldehyde groups were reduced with sodium borohydride. For the-cyclodextrin polymer, optimum film performance was found for a 1:10 mass ratio of glutaric dialdehyde to prepolymer, which corresponds to a molar ratio of glutaric dialdehyde to cyclodextrin units of about 1.75: 1. Such films, of thickness 2.4 µm, were prepared on metallic or glassy-carbon substrates for characterization by scanning-electron microscopy, and for studies with the electrochemical quartz-crystal microbalance.     

Adsorption of an amphipatic copolymer on a kidney dialysis membrane

We have studied the adsorption of a copolymer of acrylonitrile and methacrylate of nonaethyleneglycol on a kidney dialysis membrane, which contains mostly nitrile groups. The kinetics study reveals at first a rapid increase of the adsorbance, followed by slow variations suggesting rearrangements at the interface. The isotherms do not present a true plateau at high concentration. The high adsorbance observed at low pH or high salt concentration could be related to the ability of polyethyleneoxide to form a complex with cations.