分析化学中液膜富集方法的研究——痕量锰的液膜分离富集与火焰原子吸收光谱法测定

本文以N_(205)-P_(507)-煤油-液体石蜡-HCl液膜体系分离富集了痕量Mn~(2+),五次提取分离,富集倍数可达87倍,回收率近于98％。与火焰原子吸收光谱法结合,可富集测定ppb级的Mn~(2+)。     

电位法测定异价阳离子通过阳离子交换膜时的选择透过性

从理论上导出了不等价的两种阳离子在通过阳离子交换膜时的选择透过性与膜电位的关系，并用电位法对一些不等价阳离子组合在两种商品膜中的选择透过性进行了测定。本方法测定结果与电渗析实际分离效果相符。     

高分子气体分离膜材料的化学结构与气体透过性能之间的关系

本文以硅橡胶和聚酰亚胺为基础,从高分子的化学组成、分子链段的运动能力、侧基的大小及其作用等几个方面,讨论了聚合物的化学结构对其均质膜的气体选择透过性能的影响,以溶解扩散过程对气体分离膜材料的透气行为进行了剖析,井简述高分子化学结构对其成膜时结晶情况的影响及对气体透过的作用;还概述了气体分离膜科学发展的历史以及基本原理.     

氯磺化聚乙烯结构和性能研究Ⅰ.氯磺化反应及其对晶体结构的影响

氯磺化聚乙烯水解后是一种性能特异的离子交换膜。本文研究了低密度及高密度聚乙烯中空纤维氯磺化反应时间与交换容量之间的关系,并用红外光谱及广角X射线衍射法测定了氯磺化反应对聚乙烯晶体结构的影响。结果表明,氯磺化反应主要发生在聚乙烯的非晶区,最大交换容量及反应速度均与非晶区含量有关。反应对晶粒表面也有一定程度的侵蚀作用,随着交换容量的增加,结晶度下降,晶粒度减小。低密度及高密度聚乙烯的变化趋势相似,但前者比后者变化更显著。     

Activity coefficients of electrolytes from the E.M.F. of liquid membrane cells. II - multicharged electrolyte solutions

The activity coefficients of Co(en)₃Cl₃ and K₂SO₄ were measured by means of a cell with ion-exchange liquid membranes following the method described in paper I. The results prove that this method is even more valuable with multicharged salts than with 1-1 electrolytes. The values obtained are precise and reliable down to dilution limits never before accessible, e.g., 4×10^–5 mol-kg^–1 in Co(en)₃Cl₃. High dilution levels are of particular importance when dealing with highly charged electrolytes since the trend at higher concentrations often leads to errors both in extrapolation to infinite dilution and in the absolute activity coefficients. As an application, the activity coefficients of [Co(en)₃]₂(SO₄)₃-suspected to be wrongly evaluated in past literature-were measured, and their values at low concentrations were actually lower than those quoted before.     

Effect of chemical modification of ion-exchange membrane MA-40 on its electrochemical characteristics

Transport characteristics of commercial heterogeneous anion-exchange membranes MA-40 and MA-41 are studied, together with those of membrane MA-40M fabricated by treating the MA-40 surfaces with a strong polyelectrolyte complex. It is demonstrated that, after modification, the electrical conductivity of MA-40M in an NaOH solution increases. At overlimiting currents, the water dissociation rate on this membrane decreases as compared with the initial membrane. At the same time, no noticeable change in the rate of transport of counter-ions (ions Cl^-) through the membrane at a fixed potential drop is discovered at under-and overlimiting currents. The MA-40M membrane behavior is explained by the conversion of secondary and tertiary functional ammonium groups in the near-surface membrane layers approximately 80 μm thick into quaternary groups during the treatment by the polyelectrolyte.     

A new poly(2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate, diethyl maleate) membrane controlled clonidine linear release in the transdermal drug delivery system

Oral clonidine, used as an antihypertensive, can result in some side effects such as dry mouth, drowsiness, dizziness and sedation; thus, clonidine transdermal drug delivery (TDD) was considered. Use of the controlled release membrane was one of the methods in TDD systems to regulate the permeation properties. A new type of copolymer membrane that controlled clonidine linear release in TDD system was synthesized by UV radiation. This membrane consisted of three monomers: 2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate and diethyl maleate. The membrane had both fine permeation properties and perfect physical properties when three monomers were in the weight ratio of 4:4:2; this type of membrane was chosen as an optimized membrane. It was found that the membrane controlled clonidine zero-order release, the permeation rates decreased with the thicknesses of membranes increasing, and the permeation rates were linearly dependent on the square root of the concentration of clonidine. Furthermore, the optimized membranes were characterized by FTIR, DSC and SEM.     

Binding Aedes aegypti densonucleosis virus to ion exchange membranes

Experimental and numerical results for binding Aedes aegypti densonucleosis virus (AeDNV) using anion and cation exchange membranes are presented. AeDNV particles are adsorbed by anion and cation exchange membranes providing the virus particles and membranes are oppositely charged. Q membranes which are strongly basic anion exchangers were the most effective. Dynamic and static capacities for Q membranes were found to be similar. A numerical model is proposed which assumes a log normal pore size distribution. By estimating the required parameters from static binding experiments, the model may be used to calculate the breakthrough curve for virus adsorption.     

Potentiometric Membrane Sensor for Determination of Saccharin

A potentiometric poly(vinyl chloride) membrane sensor for determination of saccharin is described. It is based on the use of Aliquat 336S-saccharinateion-pair as an electroactive material in plasticized PVC membranes with o-nitrophenyloctylether or dioctylphthalate. The sensor is conditioned for at least two days in 0.1 mol L⁻¹ sodium saccharinate before use. It exhibits fast, stable and Nernstian response for saccharinate ions over the concentration range of 1.0 × 10⁻¹–5.0 × 10⁻⁵ mol L⁻¹ and pH range of 4.5–11. The sensor is used for determination of saccharin in some dosage forms. Results with an average recovery of 101% and a mean standard deviation of 0.2% are obtained which is compared favourably with data obtained using the British pharmacopoeia method. The sensor shows reasonable selectivity towards saccharin in presence of many anions and natural sweeteners.     

Potentiometric pH response of membranes prepared with various aminated-poly (vinyl chloride) products

The preparation and potentiometric pH response properties of membranes formulated with various aminated-poly(vinyl chloride) (PVC-NH₂) products are described. Products containing secondary and/or primary amino functional groups are obtained by modifying PVC with mono- and/or diamines, respectively. Blank membranes prepared with either type of aminated-polymer exhibit nearly Nernstian potentiometric pH responses over different pH ranges. In general, membranes based on diamino products exhibit pH response over a wider range (5–10.5) than membranes formulated with monoamino products (<8.0). These potentiometric results are used to estimate the basicity of the various primary and secondary amino sites in the membrane phases.Dedicated to Professer W. Simon on the occasion of his 60th birthday