A New Method for Separation of Hydrophobic Au Nanoparticles in the Reversal Micelle

In this article, a new method which not only can separate hydrophobic Au nanoparticles (NPs), but also obtain highly monodisperse NPs is discussed. A self‐made device of two same burettes, one of which was inserted into the other, was used for separating the nanoparticles by washing the reversal micelle. The effects of separation were characterized and analyzed by micrograph of transmission electron microscope (TEM), UV‐vis spectra, quartz crystal microbalance (QCM), and energy dispersive x‐ray analysis (EDX). It has been shown that, the smaller nanoparticles are, the easier they are to stay at the reversal micelle and the narrower the sizes are. This method can be applied to synthesize highly monodisperse Au NPs.     

Ammonium Ion Optical Sensor Formation and Characterization of a Self‐Assembled Thiazole Containing Dibenzo‐18‐Crown‐6 Monolayer toward Developing Ammonium Ion‐Sensing Interface

Abstract

This letter demonstrates a selective NH₄ ⁺ detection using a synthesized thiazole benzo crownether ethylamine‐lipoic acid conjugate (1) monolayer. A self‐assembled monolayer (SAM) of 1 was formed on Au surface and well characterized by atomic‐force microscopy, Fourier transform infrared reflection absorption spectroscopy and cyclic voltammetry (CV). A good selectivity for NH₄ ⁺ sensing was observed in a range of 1.0×10^?1 to 1.0×10^?6 M by surface plasmon resonance.     

A version of Stöber synthesis enabling the facile prediction of silica nanospheres size for the fabrication of opal photonic crystals

A sol-gel synthesis procedure based on the method proposed by Stöber et al. (J Colloid Interface Sci 26:302–315, 1968) has been adopted for the one-step preparation of mono-dispersed silica nanospheres. An excellent control of the particle diameter over a wide range is obtained by varying the amount of silicon alkoxide only, while the concentration of all other components is kept fixed: this allows the fabrication of artificial opals with a finely tuned and precisely predictable lattice parameter.     

Multispectrum fits for line mixing in the ν3 band Q branch of methane

First-order line-mixing coefficients and model relaxation matrix element scaling factors have been obtained for allowed transitions in the ν₃ band Q branch of CH₄ broadened by H₂, He, N₂, O₂, Ar, and CH₄. The broadening, shifting, Dicke-narrowing, and line-mixing parameters are determined by simultaneous least-squares fitting of spectra at pressures from 0.014 to 66.66 kPa recorded with a high-resolution difference-frequency laser. These results confirm, improve, and extend a previous analysis of the lower pressure (?13.3 kPa) data [A.S. Pine, J. Chem. Phys. 97 (1992) 773] which yielded averaged coefficients of individually fit spectra where adjacent broadened lines are still partially resolved.     

Quantum electrodynamic effects in atomic structure

Summary In high-Z atoms, quantum electrodynamic (QED) corrections are an important component in the theoretical prediction of atomic energy levels. The main QED effects in electronic atoms are the one-electron self-energy and vacuum-polarization corrections which are well known. At the next level of precision, estimates of the effect of electron interactions on the self energy and higher-order effects in two exchanged photon corrections are necessary. These corrections can be evaluated within the framework of QED in the bound interaction picture. For high-Z few-electron atoms, this approach provides a rapidly converging series in 1/Z for the corrections, which is the generalization of the well-known relativistic 1/Z expansion methods. This paper describes recent work on the effect of electron interactions on the self energy. The QED effects are particularly important for the theory for lithiumlike uranium where an accurate measurement of the Lamb shift has been made, as well as for numerous other cases where systematic differences appear between theory that does not include these QED effects and experiment.     

磷酰化氨基酸自聚成肽的FTIR研究

本文通过对傅里叶变换红外光谱（ＦＴＩＲ）技术研究证明了磷酰化氨基酸可以知聚成肽，并由此说明了在仿生化成肽反应过程中，磷（酰化）起着十分重要的作用，同时了说明了ＦＴＩＲ技术为仿生化的过程研究提供了新的研究方法。     

Ordered arrangement of 9-aminoanthracene on Au(1 1 1) surfaces: A scanning tunneling microscopy study

We present a scanning tunneling microscopy (STM) investigation of 9-aminoanthracene (AA) on the reconstructed Au(1 1 1) surface. The bare Au(1 1 1) surface shows the herringbone reconstruction which is conserved upon deposition of the organic molecules. Most of the AA molecules are found to decorate the regions of fcc-stacking of the gold surface where a periodic linear arrangement is observed. The orientation of the long molecule axis of individual molecules is along the -directions of the Au substrate. In addition, for individual domains of the surface reconstruction, one of the three possible orientations is preferred. On substrate areas which exhibit a high step density, the steps are completely decorated by AA molecules. A detailed analysis of the STM images reveals that the molecules are located on top terrace levels. The fine structure of individual molecules on the terrace shows a clear dependence on the tunneling voltage and resembles the molecular orbitals of the free AA molecule.     

Magnetic nanocomposite of self‐doped polyaniline–graphene as a novel sorbent for solid‐phase extraction

This work is the first study on the extraction efficiency of self‐doped polyaniline that is immobilized on the graphene‐modified magnetic nanoparticles. The new material was used as a sorbent for the magnetic solid‐phase extraction of methyl‐, propyl‐, and butylparabens. The use of graphene provides a high surface area and prevents aggregation of the nanoparticles. The self‐doped polyaniline also provides multifunctionality, high extraction capacity, and chemical stability even in the basic medium. The parabens were acetylated for determination by gas chromatography with flame ionization detection. The effects of monomer ratio, extraction solvent, sorbent amount, sample volume, desorption solvent volume, adsorption and desorption times, and sample ionic strength were optimized. Preconcentration factors obtained were from 190 to 310. The detection limits of the method were <2.8 μg/L. Linear ranges of the method were 5–2000 μg/L for propyl and butyl parabens, and 10–2000 μg/L for methyl paraben. The method was applied for the determination of the parabens in cosmetic products and extraction recoveries were 89–101% with RSDs ≤7.9%.     

Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.     

智能岩石力学及其内容

本文针对岩石力学研究中目前存在的问题和信息时代的要求, 提出了21世纪的智能岩石力学的新思想和研究内容。它是综合现有各种行之有效的方法, 系统研究岩石工程问题, 提高岩石力学解决复杂问题的准确性。