Color tuning of up-conversion emission in ytterbium,erbium, aluminum tri-doped zinc oxide crystal by adjusting aluminum concentration

Ytterbium, erbium, aluminum tri-doped zinc oxide crystal was synthesized, which can turn color from red to green up-conversion luminescence through adjusting aluminum content. When the aluminum concentration reached 4?mol%, the color of up-conversion emission first turn from red to green. Meanwhile, the ratio of red to green emission reduced from 25.32 to 0.26, and the coordinates of chromaticity coordinate calculation changes from (0.5749, 0.3378) to (0.2190, 0.7169) with aluminum concentration range from 0 to 4?mol%. The up-conversion emission peaks at 521, 542, and 660?nm of sample originate from the transitions of ²H_11/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2, and ⁴F_9/2 → ⁴I_15/2 of erbium ions, respectively. X-ray diffraction patterns perform the better crystallization degree with increasing aluminum concentration. The scanning electron microscopy images show the porous and lamellar structures with different aluminum concentrations. A convenient but effective design to obtain ytterbium, erbium, aluminum tri-doped zinc oxide up-conversion luminescence is reported, which can turn color from red to green.     

工业催化:选择性提升策略

工业催化直接或间接贡献了世界GDP的20%-30%,推动了产业变革和社会进步.对于工业催化,开发高活性、高选择性和高稳定性的多相催化剂至关重要,而选择性是最主要的挑战.因为实现催化选择性的精确控制是绿色化学的重要概念之一,更是工业催化可持续发展的重要驱动力;而且,选择性不仅决定了催化过程的原子经济性,也影响到后续分离过程的能耗.针对多数工业催化反应存在'活性越高、选择性越低'的相互制约与矛盾问题,本文以若干能源化工催化反应为例,试图总结催化选择性提升的一般策略,以期为有关工业应用的催化新过程提供科学参考.多相催化一般经历与反应物有关的步骤(反应物的外扩散、内扩散和化学吸附)、与反应有关的步骤(活化和表面反应)、以及与产物相关的步骤(产物脱附、内扩散和外扩散).本文依此归纳并举例说明提高选择性的一般策略.在汽油催化吸附脱硫中,主要利用了催化剂中零价镍-氧化锌耦合活性中心的选择吸附策略,使零价镍优先吸附含硫化合物,从而实现选择性脱硫而不饱和烯烃.在甲苯和甲醇侧链烷基化反应中,主要利用了特定空间分布的酸碱吸附位,实现吸附甲苯和稳定甲醛中间体的协同匹配.在乙苯脱乙基型二甲苯异构化反应中,主要利用了双床层对催化剂功能的分离策略,在不同的择形催化剂床层中分别进行乙苯脱乙基反应和二甲苯异构化反应,从而提高对二甲苯的产量.在苯选择加氢制环己烯反应中,主要利用强化产品脱附的策略,促进环己烯产品从亲水改性的催化剂表面脱附,实现环己烯选择性的提升.这些炼油与化工研究案例中同时存在多个连串-平行反应,主要是利用吸附中心、反应中心在时间或空间上的耦合、解耦或限域策略,调控不同途径的扩散能垒、反应能垒,实现了催化剂选择性的提升.多相催化多是复杂过程,基于提高选择性的初步认识,还要结合具体复杂催化过程,系统研究单策略以及多策略组合作用下的选择催化过程,实现在合理时间尺度、空间尺度上设计高选择性的催化剂,而这本质上是一种介尺度催化.     

Chemoselective hydrogenation of α,β-unsaturated aldehydes with modified Pd/C catalyst

Selective hydrogenation of α, β-unsaturated aldehydes with modified Pd/C catalyst was developed.The reduction of C=O bond could be efficiently inhibited by the addition of carbonates,and high selectivity to the corresponding saturated aldehydes was achieved under mild conditions.This protocol provides an alternative for efficient preparation of saturated aldehydes.     

Structural and electronic properties of type-I and type-VIII Ba8Ga16Sn30 clathrates under compression

The total energy and electronic structures for type-I (β phase) and type-VIII (α phase) Ba₈Ga₁₆Sn₃₀ clathrates under hydrostatic pressure have been investigated using density functional theory (DFT) calculations. It was found that the type-VIII phase is more stable than the type-I one at ambient conditions and that β→α phase transition can not occur under hydrostatic pressure. The band structures show that the type-I and type-VIII Ba₈Ga₁₆Sn₃₀ are indirect semiconductors with band gaps of 0.24 eV and 0.19 eV, respectively. The results suggested that type-I clathrate Ba₈Ga₁₆Sn₃₀ has a larger value of the thermoelectric (TE) power than that of type-VIII clathrate. We found that pressure tuning changes the k-point of conduction band minimum (CBM) in the Brillouin zone for β-phase, but it is not the case for α-phase. Furthermore, the results show that the pressure can change the interaction between guest atoms and the host lattice, and consequently results in the decrease of the band gap of β-phase and the increase of the band gap of α-phase, indicating that the pressure effect can play an important role in the magnitude of the TE power.     

Properties of two amide‐based hydrophilic interaction liquid chromatography columns

Hydrophilic interaction liquid chromatography is a separation technique suitable for the separation of moderately and highly polar compounds. Various stationary phases (SPs) for hydrophilic interaction liquid chromatography are commercially available. While the SPs based on the same type of ligand are available from different providers, they can display a distinct retention characteristics and separation selectivity. The current work is focused on characterization and comparison of the separation systems of two amide‐based HPLC columns from two producers, i.e. XBridge Amide column and TSK gel Amide‐80 column. Several characterization procedures (tests) were used to investigate the differences between these columns. The chromatographic behavior of selected analytes indicates that multimodal interactions are responsible for retention and separation on these columns. Multiple testing approaches were used in order to reveal subtle differences between the SPs. Both amide‐based columns showed certain differences in retention, selectivity, and plate counts. Based on the tests used in this study, we conclude that the investigated columns provide a different degree of H‐bonding interactions.     

Ammonium salt catalyzed oxidation of organosulfides to organosulfoxydes

The selective oxidation of aromatic and aliphatic organosulfides with H₂O₂/H₂O catalyzed by metal free ammonium salts has been explored. Reactions were performed using 2.5–5 mol % of catalyst loadings, isolating the corresponding sulfoxides in good to excellent yields (75–93%) and high selectivity.     

苯乙烯与4-氨基苯酚的氢氨甲基化反应研究北大核心CSCD

氢氨甲基化反应(HAM)是由简单烯烃、胺和合成气一锅法合成有价值胺的方法,具有较高的原子经济效率.然而,4-氨基苯酚作为一种特殊的反应底物,因其同时具有羟基和胺基官能团,在羰基化反应过程中能够选择性地在不同位点发生反应获得不同的产物.因此,我们系统研究了4-氨基苯酚与烯烃的HAM,通过筛选反应参数,确定了最优反应条件,并通过调控添加剂种类,选择性地在4-氨基苯酚的不同活性位点发生反应.结果表明,以甲醇为溶剂,三(3-甲氧基苯基)膦为配体,RhCl(PPh_(3))_(3)为催化剂前驱体,合成气压力4 MPa(H_(2)∶CO=3∶1),反应温度100℃,反应时间20 h时,该催化体系具有最高的反应活性.当以CH3COOH作为添加剂时,选择性的4-氨基苯酚的胺基官能团发生氢氨甲基化反应得到产物4-[(2-苯丙基)氨基]苯酚,收率为82%;当以DBU作为添加剂时,得到苯乙酮产物,收率为92%.最后,提出了该反应可能的机理,为4-氨基苯酚的选择性反应提供理论依据.