V2O5-Ag2O/η-Al2O3催化剂上甲苯氧化制苯甲醛的研究

制备了一系列负载型V—Ag—Al—O催化剂并用于甲苯的气相选择氧化制苯甲醛反应，考察了催化剂组成对反应性能的影响．研究发现，V205负载量为12．5％、Ag2O负载量为7．5％并经773K活化的4号催化剂，在空速467．6h-1，温度663K时反应，得到了甲苯转化率49．58％、苯甲醛选择性29．22％的较好结果．用XRD、XPS、SEM等测试手段，对催化剂进行了结构表征．     

Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003     

Partial Molar Volumes and Partial Molar Adiabatic Compressibilities of Fe(III) Tetrafluoroborate Complexes with DMSO, Pyridine, and Pyridine Derivatives

The apparent and limiting apparent molar volumes of dilute aqueous solutions of KBF₄, and the complexes [Fe(DMSO)₆](BF₄)₃, [Fe(Py)₄(H₂O)₂](BF₄)₃, [Fe(4-Mepy)₂(H₂O)₂](BF₄)₃, and [Fe(4-Etpy)₂(H₂O)₂](BF₄)₃ were determined from density data measured at 5, 15, and 25°C. The apparent and limiting apparent molar adiabatic compressibilities of these complexes were determined from ultrasonic sound velocities measured at the same temperatures in dilute aqueous solutions. The volume change associated with complex formation is discussed in terms of the nature of the coordinate bond and also the role of the central metal atom and ligands in the solvation behavior of these complexes.     

Selective Determination of Dopamine in the Presence of Ascorbic Acid at Porous‐Carbon‐Modified Glassy Carbon Electrodes

Selective dopamine (DA) determinations using porous‐carbon‐modified glassy carbon electrodes (GCE) in the presence of ascorbic acid (AA) were studied. The effects of structure textures and surface functional groups of the porous carbons on the electrochemical behavior of DA was analyzed based on both cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The differential pulse voltammetry of DA on the modified GCE was determined in the presence of 400‐fold excess of AA, and the linear determination ranges of 0.05–0.99, 0.20–1.96, and 0.6–12.60 μM with the lowest detected concentrations of 4.5×10^?3, 4.4×10^?2, and 0.33 μM were obtained on the mesoporous carbon, mesoporous carbon with carboxylic and amino groups modified electrodes, respectively.     

Some Organic Reactions in Supercritical Carbon Dioxide

Organic reactions in supercritical carbon dioxide (scCO2) have facilitated great progress in recent years . ScCO2, as an environmentally friendly reaction medium, may be a substitute for 1 volatile and toxic organic solvents and show some special advantages. Firstly, CO2 is inexpensive, nonflammable, nontoxic and chemical inert under many conditions. Secondly, scCO2 possesses hybrid properties of both liquid and gas, to the advantage of some reactions involving gaseous reagents. Control o…     

气相和溶液中金属离子与腺嘌呤配位选择性的理论研究

在B3LYP/6-31G(d,p)水平,全优化Mg2+、Ca2+、Mn2+、Co2+、Zn2+、Cu2+、Ni2+、Cd2+ (用有效实势(ECP) 方法处理)与腺嘌呤(A) N(1)、N(7)位点配位的两类配合物气相结构,通过相互作用能和自由能分析分别得出两位点对所研究金属离子的选择性顺序;后采用Onsager模型,优化其在水溶液(=78.39)中的结构,讨论溶剂效应对上述顺序的影响;通过相对自由能分析分别得出气相和溶液中,同种金属对两位点的选择性规律。溶液中金属离子与N(7)位配位的相对优选顺序为:Co2+ > Mg2+ > Cd2+ > Ca2+ > Zn2+ > Mn2+ > Ni2+ > Cu2+。     

The parameterization and validation of generalized born models using the pairwise descreening approximation

Generalized Born Surface Area (GBSA) models for water using the Pairwise Descreening Approximation (PDA) have been parameterized by two different methods. The first method, similar to that used in previously reported parameterizations, optimizes all parameters against the experimental free energies of hydration of organic molecules. The second method optimizes the PDA parameters to compensate only for systematic errors of the PDA. The best models are compared to Poisson-Boltzmann calculations and applied to the computation of potentials of mean force (PMFs) for the association of various molecules. PMFs present a more rigorous test of the ability of a solvation model to correctly reproduce the screening of intermolecular interactions by the solvent, than its accuracy at predicting free energies of hydration of small molecules. Models derived with the first method are sometimes shown to fail to compute accurate potentials of mean force because of large errors in the computation of Born radii, while no such difficulties are observed with the second method. Furthermore, accurate computation of the Born radii appears to be more important than good agreement with experimental free energies of solvation. We discuss the source of errors in the potentials of mean force and suggest means to reduce them. Our findings suggest that Generalized Born models that use the Pairwise Descreening Approximation and that are derived solely by unconstrained optimization of parameters against free energies of hydration should be applied to the modeling of intermolecular interactions with caution.     

Selective ortho-cleavage of methoxymethyl- and 4-methoxybenzyl ethers

Iodine in methanol has been found to be an effective catalyst system for the cleavage of alkoxymethyl ethers. This catalyst system is particularly useful for the selective removal of ortho-methoxymethyl- and ortho-(4-methoxybenzyl) ethers in the presence of their para-counterparts. Further investigation of various metal salts in methanol for their ability to cleave alkoxymethyl ethers revealed high-valent salts as effective catalysts, presumably through the release of small quantities of HCl.     

An ab initio molecular orbital study of the grignard reagents CH3MgCl and [CH3MgCl]2: The Schlenk equilibrium

Ab initio molecular orbital calculations are used to study the modified Schlenk equilibrium: 2RMgCl (RMgCl)² MgR₂ + MgCl₂ Mg(Cl₂)MgR₂ with R=H and CH₃. In the absence of any solvents, calculations indicate that the formation of the various possible bridged dimers (RMgCl)₂ is substantially exothermic. However, using dimethylether as a model solvent, we show that the formation of the dimer (Me₂O)(CH₃)Mg(Cl₂)Mg(CH₃)(OMe₂) is exothermic only when entropic effects are included.     

Dielectric relaxation of electrolyte solutions in acetonitrile

Complex permittivity spectra in the frequency range 0.95v (GHz)89 for acetonitrile and its solutions of LiBr, NaI, NaClO₄, and Bu₄NBr at 25°C show one Debye equation for the neat solvent whereas the superposition of a Debye process for the solute and a Cole-Cole distribution for the solvent is necessary to account for the dielectric relaxation behavior of the solutions. The reorientation of bulk acetonitrile is diffusive and only weakly coupled to viscosity. The number of solvent molecules irrotationally bound to the electrolyte is in good agreement with conventional solvation numbers for all electrolytes, when kinetic depolarization is assumed to be negligible. The solute relaxation process is dominated by the formation kinetics and reorientation of contact ion pairs. There is evidence for solvent-shared ion pairs in dilute NaClO₄ solutions.