Determination and fractionation of sulphur in a contaminated dredged sediment

Conversion of sulphur compounds in reduced, contaminated sediments that are brought in upland conditions may largely affect the potential mobility of heavy metal contaminants. We applied selected methods for the determination of total sulphur and sulphur fractions in a contaminated sediment in the reduced state and after gradual drying and oxidation during 1 month. Dry ashing, followed by ion chromatographic detection, was reliable for the determination of total sulphur. Good recoveries were obtained in both reference samples and spiked samples. Total sulphur was 14.5±0.6 g kg⁻¹ relative to dry sediment. Wet chemical methods that involve the determination of acid-volatile, Zn–HCl-reducible, chromium-reducible, acetone-soluble and HI-reducible sulphur were used to estimate specific sulphur forms. Results for acetone-soluble sulphur were to high and not consistent with results for other fractions. Major part of sulphur in the sediment (90%) was inorganic. Sulphides were converted partially to sulphate and to intermediary oxidised sulphur compounds upon oxidation of the sediment. The results suggested that the intermediary oxidised sulphur pool in the reduced sediment (2.5 g kg⁻¹) mainly consisted of pyrite, that was not converted during drying and oxidation. No significant changes in organic sulphur were detected.     

分散法制备的CuCl/MCM-41上C3H6选择催化还原NO反应的研究

研究了由分散法制备的两种CuCl/MCM-41催化剂上丙烯在过量氧存在下选择催化还原NO反应, 发现所制备的CuCl/AlMCM-41催化剂的反应活性明显高于CuCl/SiMCM-41. XRD, IR, TPR及ESR的研究结果表明, CuCl/AlMCM-41催化剂上的主要活性中心是与骨架铝配位的铜离子(Cu2+/Cu+).     

Aktivierung von CO2 an Übergangsmetallzentren: Zum Ablauf der CO2-Reduktion an Nickel(0)-Fragmenten

Activation of CO₂ at Transition Metal Centres: The Route of the CO₂ Reduction at Nikel(0) Moieties A competing reaction in the catalytic cyclooligomerization of hex-3-yne and CO₂ at the (TMED)Ni(0)-fragment (TMED = N,N,N′,N′-tetramethylethylendiamine) is the formation of carbon monoxide and (TMED)Ni(CO₃). So it is possible to explain the generation of II (TMED)Ni(diethylmalicacidanhydride) and III (a nickel trimer with two (TMED)Ni(CO₃) units). Both complexes are characterized by X-ray analysis. The reduction of CO₂ to CO most likely proceeds via an intermediate in which two molecules of carbon dioxide are coupled head-to-tail to form a metallacycle. An ab initio scf geometry optimization supports the existence of such an intermediate.     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

甲烷氧化细菌催化二氧化碳生物合成甲醇的研究

甲烷氧化细菌中包含的甲烷单加氧酶(MMO)、甲醇脱氢酶(ADH)、甲醛脱氢酶(FaldDH)、甲酸脱氢酶(FateDH)经过一系列反应能够把甲烷深度氧化生成二氧化碳，并生成一定的能量物质．把二氧化碳还原为甲醇是一个需要能量的过程，目前还没有已知的有机体在温和条件下完成这一反应．研究发现，甲基弯菌Methylosi-nus trichosporium IMV 3011可以催化二氧化碳生物转化生成甲醇．在休眠的悬浮细胞中充人二氧化碳后，反应一段时间在反应液中检测到了甲醇．二氧化碳转化成甲醇是一个需要能量推动的反应，为了补充反应所消耗的能量．反应一段时间后需要用甲烷进行再生，以恢复细胞中的还原当量NADH．我们进行了反应再生的交替连续批式反应，甲醇积累量能够维持在一个比较稳定的水平．理论上，反应不会增加温室效应，这是一个有效的、环境友好的、可恢复的反应过程．     

Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.     

REDUCTION OF NO BY CO OVER NiWO4, NiO, AND WO3 CATALYSTS

We present a comparative study of NiWO₄, NiO, and WO₃ catalysts for simultaneous conversion of NO and CO. Samples were synthesized by reacting ammonium metatungstate and/or nickel nitrate at high temperature (773 K to 903 K) under an oxygen stream. Catalysts were characterized by X-ray diffraction, surface area measurements, energy dispersive spectroscopy and scanning electron microscopy. The catalytic reduction of NO by CO took place in the temperature range (523 to 973) K under highly reductive conditions (NO:CO= 1:5) over NiWO₄NiO, and WO₃, respectively. The 100 % NO conversion at GHSV of 11460 h^-1 was achieved at 773 K over NiWO₄ and at 848 K over NiO. The WO₃ was deactivated at 898 K. However, in the range (523 to 723) K NiO was more active than NiWO₄ and WO₃ catalysts.     

Electron-transfer reduction of selected alcohols with alkalide K, K(15-crown-5)2 via organometallic intermediates

The course of the reaction of alkalide K⁻, K⁺(15-crown-5)₂1 with selected alcohols depends on the kind of alcohol and the mode of substrate delivery. In the case of methanol, potassium methoxide formed initially undergoes destruction at the excess of 1. It results in potassium oxide and methylpotassium. The latter opens the crown ether ring giving potassium tetraethylene glycoxide vinyl ether and methane. A similar course of the process is observed for propanol. Potassium glycidoxide is the main product formed in the reaction of 1 with glycidol. Its oxirane ring is opened at the excess of 1. Organopotassium alkoxides, i.e., potassium potassiomethoxide and dipotassium potassiopropane-1,2-dioxide are intermediate products of this reaction. They react then with the crown ether. Potassium methoxide, potassium enolate of acetaldehyde, dipotassium propane-1,2-dioxide and potassium tetraethylene glycoxide vinyl ether are the final products of this process.     

Selective hydrogenations of steroids catalyzed by heterogenized Ru complexes

Summary [RuCl₂(PPh₃)₃], [{RuCl₂(TPPMS)₂}₂] and their heterogenized analogs were applied in the selective hydrogenation of 17-keto- and α,β-unsaturated ketosteroids. In basic conditions these complexes selectively hydrogenated the C=O bonds, similarly to the results obtained in the case of α,β-unsaturated aldehydes. A new method was developed for the synthesis of an expensive steroid alcohol, which can be prepared traditionally in a more complicated way.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.