Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Determination of the purity of phenoxymethylpenicillin by micellar electrokinetic chromatography and reversed phase liquid chromatography on a monolithic silica column

A micellar electrokinetic chromatographic and a fast reversed‐phase liquid chromatographic method have been developed for determination of the purity of phenoxymethylpenicillin. The optimized running buffer composition was 40 mM phosphate–borate–125 mM SDS–3.5% (v/v) methanol. The HPLC method employed a monolithic silica C18 column and a mobile phase composed of phosphate buffer, pH 3.5, and ACN, the flow‐rate being 3.5 mL/min. Both methods were successfully validated. Linearity, intermediate precision, limits of quantitation, accuracy, and a good correlation of the HPLC and MEKC results were demonstrated. Both methods proved to be fast and reliable and sufficiently sensitive. A combination of the two methods can be very useful in impurity profiling.     

新疆产12种中草药中微量金属元素的测定

本文测定了新疆产新疆党参,新疆元胡等１２种中草药中十种微量金属元素的含量．结果表明这些中草药中具有显著生理活性的Ｚｎ、Ｆｅ、Ｃｕ、Ｍｎ等元素．它们的含量除了个别样品外均大于或接近于国内其它地区所产的同种中草药、根据冠心病病因的Ｚｎ／Ｃｕ值假说和微量金属元素的含量关系,新疆产１２种中草药也可用于防治冠心病．     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

2－（5－Br－2－吡啶偶氮－5－二乙氨基）－酚与铑的显色反应的研究及应用

本文研究了２－（－５－Ｂｒ－２吡啶偶氮－５－二乙氨基）－酚与铑（Ⅲ）的显色反应。在ｐＨ为４．０的邻苯二甲酸氢钾缓冲液介质中，Ｒｈ（Ⅲ）与试剂形成稳定的橙红色络合物，其组成比为１：４，最大吸收波长为４９０ｎｍ，表现摩尔吸光系数为１．３×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。铑含量在０～４μｇ／１０ｍＬ范围内服从比尔定律。     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

Selective ortho-cleavage of methoxymethyl- and 4-methoxybenzyl ethers

Iodine in methanol has been found to be an effective catalyst system for the cleavage of alkoxymethyl ethers. This catalyst system is particularly useful for the selective removal of ortho-methoxymethyl- and ortho-(4-methoxybenzyl) ethers in the presence of their para-counterparts. Further investigation of various metal salts in methanol for their ability to cleave alkoxymethyl ethers revealed high-valent salts as effective catalysts, presumably through the release of small quantities of HCl.     

Kinetic determination of codeine in pharmaceutical preparations

A kinetic method for the determination of codeine, based on its inhibitor action on the catalytic decomposition of hydrogen peroxide by cobalt(II), is presented. It has been found that the effect of codeine is most pronounced in the presence of 5% v/v ethylene glycol. The reaction is followed photometrically. Codeine can be determined in concentrations ranging from 0.80×10^–5 M to 2.4×10^–5 M. The method has been applied to the determination of codeine in pharmaceutical preparations.