电感耦合等离子体原子发射光谱法及离子选择电极法测定荧光级氧化钇中痕量铈的研究

文章描述了荧光级氧化钇中痕量稀土铈的测定方法,在溴酸钾存在下,5摩尔/升HNO_3介质中,以P507萃取微量铈,然后有机相用硝酸、过氧化氢反萃取、再将水相浓缩定容,然后以电感耦合等离子体原子发射光谱法分析。同时用铈的离子选择电极以二次标准加入法作第二种手段分析。样品溶液以乙醇预去溶方式引入等离子体,测定下限为2微克/克,方法简单、快速、准确。离子选择电极法测定铈离子下限1×10～(-5)摩尔/升,回收率为94-101%,方法简单,结果满意、价格便宜。     

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Recent studies show that the self-assembled monolayer (SAM) is well suited to control the selectivity of chemical vapor deposition (CVD). Here, we reported the selective CVD for copper on the functionalized SAM surfaces (with -SH, -SS-, and -SO₃H terminal groups). The -SS- and -SO₃H terminal group surfaces were obtained through in situ chemical transformation of -SH terminal group surface of a 3-mercaptopropyltrimethoxysilane-SAM (MPTMS-SAM). As a result, the -SS- terminal group surface reduces copper deposition and the -SO₃H terminal group surface enhances copper deposition comparing to the -SH terminal group surface. In addition, the MPTMS-SAM was irradiated by UV-light through a photo mask to prepare SH-group and OH-group regions. Then, copper films were deposited only on the SH-group region of the substrate in chemical vapor deposition. Finally, patterns of copper films were formed in the way of UV-light irradiation. These results are expected for use of selective deposition of copper metallization patterns in IC manufacturing processes.     

柴油机进气道喷射甲醇的排放与经济性研究

在一台增压中冷的电控单体泵柴油机上采用柴油/甲醇组合燃烧（DMCC）方式进行排放特性与经济性试验研究。结果表明:采用DMCC方式能够大量减少NO_x排放,同时CO₂排放也有所降低。可以通过在排气管上加装氧化催化转换器（DOC）很好地清除掉DMCC方式增加的HC和CO排放,其催化效率在90%以上,比原机排放低很多,DMCC方式的甲醛排放比原机高,DOC对其催化率达98%,接近超低排放。DMCC模式外特性的热效率提高了7.607%,且存在一个最佳燃料匹配区间。     

Pt–Al2O3 nanocoatings for high temperature concentrated solar thermal power applications

Nano-phased structures based on metal–dielectric composites, also called cermets (ceramic–metal), are considered among the most effective spectral selective solar absorbers. For high temperature applications (stable up to 650 °C) noble metal nanoparticles and refractory oxide host matrices are ideal as per their high temperature chemical inertness and stability: Pt/Al₂O₃ cermet nano-composites are a representative family. This contribution reports on the optical properties of Pt/Al₂O₃ cermet nano-composites deposited in a multilayered tandem structure. The radio-frequency sputtering optimized Pt/Al₂O₃ solar absorbers consist of stainless steel substrate/ Mo coating layer/ Pt–Al₂O₃/ protective Al₂O₃ layer and stainless steel substrate/ Mo coating layer /Pt–Al₂O₃ for different composition and thickness of the Pt–Al₂O₃ cermet coatings. The microstructure, morphology, theoretical modeling and optical properties of the coatings were analyzed by the x-ray diffraction, atomic force, microscopy, effective medium approximation and UV–vis specular and diffuse reflectance.     

Demixing of severely overlapped H NMR resonances and interpretation of anomalous intensity pattern of dipolar coupled A3 spins in a weakly aligning medium

The increasing scientific and industrial interest towards metabonomics takes advantage from the high qualitative and quantitative information level of nuclear magnetic resonance (NMR) spectroscopy. However, several chemical and physical factors can affect the absolute and the relative position of an NMR signal and it is not always possible or desirable to eliminate these effects a priori. To remove misalignment of NMR signals a posteriori, several algorithms have been proposed in the literature. The icoshift program presented here is an open source and highly efficient program designed for solving signal alignment problems in metabonomic NMR data analysis. The icoshift algorithm is based on correlation shifting of spectral intervals and employs an FFT engine that aligns all spectra simultaneously. The algorithm is demonstrated to be faster than similar methods found in the literature making full-resolution alignment of large datasets feasible and thus avoiding down-sampling steps such as binning. The algorithm uses missing values as a filling alternative in order to avoid spectral artifacts at the segment boundaries. The algorithm is made open source and the Matlab code including documentation can be downloaded from www.models.life.ku.dk.     

Time domain identification and ranking of noise sources in a pneumatic nail gun

This paper investigates the noise sources in a pneumatic nail gun. The study combines two complementary experimental approaches. The first uses simultaneous data observation, with sound, acceleration and air pressure signals simultaneously recorded in conjunction with a nail gun motion high speed video. This strategy allows the identification of the physical processes involved in the operation of the machine at different time instants, as well as the associated noise generation mechanisms. However, since multiple noise sources radiate at the same time, this observation technique is not sufficient for noise source identification and ranking. Thus, a second approach introduces a selective wrapping procedure, and the strategy assures a reliable classification of the noise sources. The investigation considers the following noise origins: the air exhaust, the machine body and the workpiece/worktable.     

Pd/C-HCOONH4还原体系在苯佐卡因及类似物合成中的应用

以对硝基苯甲酸乙酯为原料,Pd/C为催化剂,甲酸铵为供氢体,乙醇为溶剂,对在室温下反应得到对氨基苯甲酸乙酯的催化转移氢化反应进行了研究.在相同的催化体系下,本佐卡因的类似物也得以高效合成.该催化转移氢化反应除温和的反应条件和高催化活性外,还兼具良好的放大前景.     

Biselective refocusing pulses and the SERF experiment

The SERF experiment is a variant of the homonuclear J-resolved experiment, in which a single coupling constant is measured. It consists of a single chemical shift selective excitation that is followed by a biselective spin echo. Recent articles mention the existence of artefacts in SERF spectra that are supposedly related to pulse imperfections. This article presents a detailed study of the biselective refocusing pulses. It also reports a method for predicting the position and amplitude of the expected and unexpected 2D spectral peaks in SERF spectra. Artefacts can be partially eliminated by phase cycling or by the introduction of static field gradient pulses in the acquisition sequence. A procedure to obtain of pure absorption peaks in SERF spectra is proposed.