Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

The second virial coefficient of 3-centerLennard-Jones molecules and its relation to 1- and 2- center molecules

The second virial coefficients of homonuclear three-centerLennard-Jones molecules are calculated with various parameters of the isosceles triangle connecting the three sites. A special effort is made to establish the reducedBoyle temperaturesT _B and the values of the second virial coefficients atT/T _B=0.3 for the sake of comparison with one- and two-centerLennard-Jones molecules. It is shown that it is possible to find parameter values of the interaction potential of one- and two-centerLennard-Jones molecules which give very similar values of second virial coefficients forT/T _B0.3, and the equivalence conditions are established. These conditions might not only give a basis for a microscopic scaling of state variables, but also some restrictions for the validity of the group contribution concept.Presented in part at the DFG-Colloquium at Paderborn, 19th April 1982, and at the 5th Conference on Mixtures of Nonelectrolytes and Intermolecular Interactions, April 18–22, 1983, at Halle (GDR).     

痕量砷流动注射在线还原氢化物发生原子吸收测定

方法采用流动注射停流技术使水及土壤浸出液中Ａｓ（Ｖ）在线还原为Ａｓ（Ⅲ），不经手工还原，用氢化物发生原子吸收光谱法直接测定砷的含量。含４ｍｏｌ／Ｌ ＨＣｌ的样品溶液与３０％碘化钾溶液在编结式反应器中混合，并在采样环中停流４０ｓ，达完全还原后注入到载流中与硼氢化钠反应，采样速度５５次／ｈ，检出限（３δ）０．１μｇ／Ｌ，对自来水和土壤浸出液的加标回收结果满意。     

12兆瓦热电气多联产装置的开发

介绍了为解决某钢铁企业的中热值煤气，蒸汽和电的短缺而开发的一台12MW的热电气多联产装置，在该系统中，把一台流化床气化炉和一台75t/h循环流化床锅炉结合在一起，从而实现煤气和蒸汽联产，在详细介绍了该装置的设计思想和结构特点的同时，用所建的热电气多联产模型对该装置包括煤气产量，煤气成分，煤气热值和系统运行温度等在内的性能参数进行了预测。     

Electronic polarizability and crystallization of K2O-TiO2-GeO2 glasses with high TiO2 contents

Some K₂O-TiO₂-GeO₂ glasses with a large amount of TiO₂ contents (15-25 mol%) such as 25K₂O-25TiO₂-50GeO₂ have been prepared, and their electronic polarizability, Raman scattering spectra, and crystallization behavior are examined to clarify thermal properties and structure of the glasses and to develop new nonlinear optical crystallized glasses. It is proposed that the glasses consist of the network of TiO₆ and GeO₄ polyhedra. The glasses show large optical basicities of Λ=0.88-0.92, indicating the high polarizabity of TiO_n (n=4-6) polyhedra in the glasses. K₂TiGe₃O₉ crystals are formed through crystallization in all glasses prepared in the present study. In particular, 20K₂O-20TiO₂-60GeO₂ glass shows bulk crystallization and 18K₂O-18TiO₂-64GeO₂ glass exhibits surface crystallization giving the c-axis orientation. The crystallized glasses show second harmonic generations (SHGs), and it is suggested that the distortion of TiO₆ octahedra in K₂TiGe₃O₉ crystals induces SHGs.     

Adaptation of a fast Fourier transform-based docking algorithm for protein design

Designing proteins with novel protein/protein binding properties can be achieved by combining the tools that have been developed independently for protein docking and protein design. We describe here the sequence-independent generation of protein dimer orientations by protein docking for use as scaffolds in protein sequence design algorithms. To dock monomers into sequence-independent dimer conformations, we use a reduced representation in which the side chains are approximated by spheres with atomic radii derived from known C2 symmetry-related homodimers. The interfaces of C2-related homodimers are usually more hydrophobic and protein core-like than the interfaces of heterodimers; we parameterize the radii for docking against this feature to capture and recreate the spatial characteristics of a hydrophobic interface. A fast Fourier transform-based geometric recognition algorithm is used for docking the reduced representation protein models. The resulting docking algorithm successfully predicted the wild-type homodimer orientations in 65 out of 121 dimer test cases. The success rate increases to approximately 70% for the subset of molecules with large surface area burial in the interface relative to their chain length. Forty-five of the predictions exhibited less than 1 A C(alpha) RMSD compared to the native X-ray structures. The reduced protein representation therefore appears to be a reasonable approximation and can be used to position protein backbones in plausible orientations for homodimer design.     

Theoretical study on the intramolecular proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes

The optimized structures and proton transfer reactions of 3-methyl-5-hydroxyisoxazole and its water complexes (3-M-5-HIO · (H₂O)_n · (n = 0–3)) were computed at B3LYP and MP2 theoretical level. The results indicates that 3-M-5-HIO has four isomers (Ecis, Etrans, K1 and K2), and the keto tautomer, and K2 is the most stable isomer in the gas phase. Hydrogen bonding between 3-M-5-HIO and the water molecules can dramatically lower the barrier by the concerted transfer mechanism. Ecis · (H₂O)₃ → K1 · (H₂O)₃ and Ecis · (H₂O)₂ → K2 · (H₂O)₂ is found to be very efficient. Comparing with the proton transfer mechanism of 5-HIO shows that the methyl substitution prevents the intramolecular proton transfer.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Submillimeter wave generation by second harmonic operation of tunable gyrotrons

The gyrotrons developed at the University of Sydney are tunable sources of millimetre and submillimetre radiation. The generation of submillimetre wavelengths requires operation at the second harmonic of the electron cyclotron frequency, or higher. Our latest gyrotron, GYROTRON IVA, has successfully achieved second harmonic operation and obtained frequencies up to 590 GHz (=0.51 mm). The experimental results and conditions for second harmonic operation will be presented. The design of a new gyrotron, GYROTRON V, which is especially optimised for the second harmonic, will also be included.     

Mercury Speciation in Fish by High-Performance Liquid Chromatography (HPLC) and Post-Column Ultraviolet (UV)-Photochemical Vapor Generation (PVG): Comparison of Conventional Line-Source and High-Resolution Continuum Source (HR-CS) Atomic Absorption Spectrometry (AAS)

An ultraviolet-photochemical generator (UV-PVG) capable of post-column on-line transformation of both organic and inorganic mercury species to cold vapor (Hg⁰) with subsequent detection by quartz tube-atomic absorption spectrometry (QT-AAS) was developed. Mercury(II), methylmercury(I), ethylmercury(I), and phenylmercury(I) were successfully detected after separation by reversed-phase high-performance liquid chromatography (RP-HPLC). Two types of AAS detectors were compared. The first was a commonly used line-source instrument while the second was a high-resolution continuum source (HR-CS) AAS. The latter provided better limits of detection: 0.47?µg?L^?1 for Hg(II), 0.84?µg?L^?1 for methylmercury(I), 0.80?µg?L^?1 for ethylmercury(I), and 2.0?µg?L^?1 for phenylmercury(I). The repeatability at 30?μg?L^?1 was 3.6%, 4.1%, 6.2%, and 4.5% for these species (n?=?10). These figures of merit were comparable with those reported for more sensitive atomic fluorescence spectrometry. Nine sample extraction procedures were investigated. Extraction by tetramethylammonium hydroxide and HCl at 75?°C was selected as the only method compatible with the proposed separation and detection steps providing high extraction efficiency and no changes in mercury speciation. The applicability of the proposed high-performance liquid chromatography–ultraviolet-photochemical vapor generation–quartz tube-atomic absorption spectrometry method was demonstrated using fish samples and certified reference materials (CRM) DOLT-4 (dogfish liver) and ERM-CE464 (tuna fish). The results were comparable to those obtained by a reference method based on L-cysteine extraction and high-performance liquid chromatography–inductively coupled plasma-mass spectrometry (HPLC–ICP-MS) determination.