线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

铜-钼源漏电极对非晶氧化铟镓锌薄膜晶体管性能的改善

在铜(Cu)和非晶铟镓锌氧化物(a-IGZO)之间插入30 nm厚的钼(Mo)接触层, 制备了具有Cu-Mo源漏电极的a-IGZO薄膜晶体管(TFT). Mo接触层不仅能够抑制Cu与a-IGZO有源层之间的扩散, 而且提高了Cu电极与玻璃基底以及栅极绝缘层的结合强度. 制备的Cu-Mo结构TFT与纯Cu 结构TFT相比, 具有较高的迁移率(～9.26 cm²·V^-1·s^-1)、更短的电流传输长度(～0.2 μm)、更低的接触电阻(～1072 Ω)和有效接触电阻率(～1×10^-4Ω·cm²), 能够满足TFT 阵列高导互联的要求.     

应用双面电极的PLZT横向电光调制器电场的精确解

使用保角变换方法导出了横向电光调制器中双面电极结构的电场和电容的解析表达式，给出了用于ＰＬＺＴ电光陶瓷介质中二次电光效应分析的电场分布的物理图像。通过计算对比表明，双面电极结构电极边级区域由于过剩双折射引起的强度调制非均匀性较单面电极有所改善。     

Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.     

Effect of fluorine in Li1.27Cr0.2Mn0.53O2 cathode for secondary lithium batteries

Fluorine substituted Li_1.27Cr_0.2Mn_0.53O₂ electrode, prepared by sol–gel method, was investigated in the present work. Thermal analysis was done on this cathode material and found to be thermally stable with a loss of weight near 300 °C. Influence of fluorine substitution on the structural and electrochemical properties of the Li_1.27Cr_0.2Mn_0.53O₂ electrode was studied by X-ray diffraction (XRD) and field emission scanning electron microscope. XRD pattern of the fluorine-doped Li_1.27Cr_0.2Mn_0.53O₂ cathode material quenched at 900 °C indicates a phase pure material. The charge–discharge profile of the prepared cathode material showed that the fluorine substitution for oxygen in the cathode material resulted in improved capacity retention. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Electronic transport properties of carbon chains between Au and Ag electrodes: A first-principles study

We report first-principles calculations of the current-voltage characteristic and the conductance of carbon-based molecular wires with different length capped with sulfur ends between two metallic electrodes made of different metals. The optimized molecular structure of carbon chain in the junction is presented on the structure of polyyne. The conductance of the polyyne wires shows oscillatory behavior depending on the number of carbon atoms (triple bonds). Current rectification is found and rectification direction presents inversion with the odd and even number of carbon atoms.     

Correlation between microstructure and property of electroless deposited Pt counter electrodes on plastic substrate for dye-sensitized solar cells

Flexible Pt counter electrodes (CEs) were prepared on indium-doped tin oxide coated polyethylene naphthalate (ITO-PEN) substrate by electroless deposition. The correlation between the microstructure and the property of the Pt CEs was investigated. Results showed that isolated Pt nanoparticles were uniformly distributed on the ITO surface at a short deposition duration, and then grew with the deposition duration, leading to the interconnection of adjacent Pt nanoparticles. The interconnection of Pt nanoparticles was beneficial to the electrical property of the Pt CEs, while it was unfavorable to the electrocatalytic property of the Pt CEs. A microstructure model was proposed to explain the correlation between the microstructure and the property of the Pt CEs. In addition, the Pt CEs showed low charge transfer resistance (1.66-0.58 Ω cm²), which was comparable to that (1.16 Ω cm²) of the conventional sputtered Pt CE. The high electrocatalytic property of the electroless deposited Pt CEs makes the assembled DSCs present comparable energy conversion efficiency of the DSCs using sputtered Pt CE.     

Electrocatalytic reduction of alkyl iodides in tetrahydrofuran at silver electrodes

Recent interest in the electrocatalytic activity of silver towards the reduction of alkyl iodides has led us to investigate whether the effect is observed in tetrahydrofuran (THF) at room temperature. Using platinum electrodes in THF for the reduction of alkyl halides at 298 K has been hampered by the solvent window, which ‘obscures’ the voltammetric signals of interest. In order to overcome these problems, voltammetry has been performed at low temperature and was shown to extend the voltammetric window, leading to accurate electrochemical analyses and even novel changes in mechanism(s) of the reactive species following electron‐transfer (ET). Herein, it is shown that for a primary and tertiary alkyl iodide in THF, electroreduction at silver leads to a significant shift in the reduction potential to more positive values compared to platinum. In addition, following reduction, a characteristic series of oxidation peaks are observed and are shown to be due to the specific activity of iodide ions towards silver following reductive cleavage of the parent alkyl iodide. This characteristic feature is not observed with other halide ions: bromide and chloride. Preparative electrolyses at controlled‐potential have suggested that the reduction of the above alkyl iodides is a one‐electron concerted process. The ‘free’ iodide ions act as a monitor of reaction progression, and the carbon‐centred radical either dimerises and/or abstracts a hydrogen atom from the electrolyte/solvent; 1‐iodoadamantane giving percentage yields of 58% adamantane and 39% 1,1'‐biadamantane, the primary alkyl iodide, prepared in‐house, giving 67% R‐H and 25% R‐R. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface modification of polytetrafluoroethylene film using single liquid electrode atmospheric- pressure glow discharge

Polytetrafluoroethylene films are treated by room temperature helium atmospheric pressure plasma plumes, which are generated with a home-made single liquid electrode plasma device. After plasma treatment, the water contact angle of polytetrafluoroethylene film drops from 114°to 46°and the surface free energy increases from 22.0 mJ/m2 to 59.1 mJ/m2. The optical emission spectrum indicates that there are reactive species such as O2+ , O and He in the plasma plume. After plasma treatment, a highly crosslinking structure is formed on the film surface and the oxygen element is incorporated into the film surface in the forms of -C-O-C-, -C=O, and -O-C=O groups. Over a period of 10 days, the contact angle of the treated film is recovered by only about 10 , which indicates that the plasma surface modification is stable with time.     

含氢电极脉冲放电等离子体特性诊断

利用飞行时间质谱法诊断了含氢电极脉冲真空弧离子源放电等离子体成分、离子电荷状态及离子扩散速度等特性.实验结果表明,含氢电极脉冲真空弧离子源放电等离子体的离子成分主要由H+,Ti+,Ti2+和Ti3+组成,其中Ti2+占主要部分.当放电电流为40～80 A时,Ti离子的平均电荷数在1.95～2.13之间,随着放电电流的增...