大气气溶胶中有机碳和元素碳监测方法的进展

本文主要介绍和评述了近10年来大气气溶胶中的有机碳和元素碳的采样和分析技术的进展,引用参考文献41篇。     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

某型机进近段高精度相对姿态实时测量技术

某型机在飞行训练过程中,进近段的二维相对姿态数据对于该型机安全着陆有着至关重要的作用。基于无线网络电台的双向数据传输系统能够实时获取进近段飞机相对理想着陆点的水平、垂直相对位置数据。通过上行链路上传着陆点的姿态数据,下行链路实时下传动动差分后的差分数据,最后在中心控制站进行二次数据处理。该技术获得的进近段二维相对姿态精度达到厘米级,满足飞行训练的需求。同时结合飞机显控数据以及视景图,以多角化动态关联的方式将实时获取的姿态数据等呈现给指挥员,更好地辅助指挥员进行着陆指挥工作。     

高纯四氯化锗测试样品的采集和制备方法研究

针对光纤级高纯四氯化锗(99.999999%)中痕量含氢杂质吸收峰红外透过率检测(FTIR)用试样的采集,以及痕量金属杂质的电感耦合等离子体质谱法(ICP-MS)测定用试样的制备方法进行了系统研究。设计开发了用于检测痕量含氢杂质吸收峰红外透过率的样品采集实验装置,实现了含氢杂质(如—OH、—CH、HCl等)吸收峰的红外透过率在线连续测试,试样采集过程全密闭进行,避免了采样过程的二次污染,采样过程流程简短,操作简便;实验优选了在制备ICP-MS法测定痕量金属杂质用的试样过程中消除四氯化锗基体干扰、防止砷等易挥发杂质损失以及防止样品处理过程污染试样的制样方法,实现了试样制备过程二次污染源的有效控制,制样过程试剂消耗量少,制备时间短,待测元素无损失。     

双一流背景下有机化学精准教学的探究实践*

有机化学课程是本校化学师范和高分子材料与工程2个国家级一流本科专业以及应用化学、制药工程等专业基础必修课程。由于化学师范和非师范专业的培养目标不同,有机化学的精准教学方面也有所差异。主要从理论教学、实验教学和多媒体教学等3个方面对化学师范专业和非师范专业有机化学差异化精准教学进行了探究实践,化学师范专业有机化学的精准教学侧重于培养学生的教学能力,非师范专业有机化学的精准教学侧重于培养学生的应用能力。     

Determination of hydrogen sulfide and volatile thiols in air samples by mercury probe derivatization coupled with liquid chromatography-atomic fluorescence spectrometry

A new procedure is proposed for the sampling and storage of hydrogen sulphide (H₂S) and volatile thiols (methanethiol or methyl mercaptan, ethanethiol and propanethiol) for their determination by liquid chromatography. The sampling procedure is based on the trapping/pre-concentration of the analytes in alkaline aqueous solution containing an organic mercurial probe p-hydroxymercurybenzoate, HO-Hg-C₆H₄-COO⁻ (PHMB), where they are derivatized to stable PHMB complexes based on mercury-sulfur covalent bonds. PHMB complexes are separated on a C₁₈ reverse phase column, allowing their determination by liquid chromatography coupled with sequential non-selective UV-vis (DAD) and mercury specific (chemical vapor generation atomic fluorescence spectrometry, CVGAFS) on-line detectors. PHMB complexes, S(PHMB)₂CH₃S-PHMB, C₂H₅S-PHMB and C₃H₇S-PHMB, are stable alt least for 12 h at room temperature and for 3 months if stored frozen (−20 °C).The best analytical figures of merits in the optimized conditions were obtained by CVGAFS detection, with detection limits (LODc) of 9.7 μg L⁻¹ for H₂S, 13.7 μg L⁻¹ for CH₃SH, 17.7 μg L⁻¹ for C₂H₅SH and 21.7 μg L⁻¹ for C₃H₇SH in the trapping solution in form of RS-PHMB complexes, the relative standard deviation (R.S.D.) ranging between 1.0 and 1.5%, and a linear dynamic range (LDR) between 10 and 9700 μg L⁻¹. Conventional UV absorbance detectors tuned at 254 nm can be employed as well with comparable R.S.D. and LDR, but with LODc one order of magnitude higher than AFS detector and lower specificity. The sampling procedure followed by LC-DAD-CVGAFS analysis has been validated, as example, for H₂S determination by a certified gas permeation tube as a source of 3.071 ± 0.154 μg min⁻¹ of H₂S, giving a recovery of 99.8 ± 7% and it has been applied to the determination of sulfur compounds in real gas samples (biogas and the air of a plant for fractional distillation of crude oil).     

Atomic‐Level Alloying and De‐alloying in Doped Gold Nanoparticles

Atomically precise alloying and de‐alloying processes for the formation of Ag–Au and Cu–Au nanoparticles of 25‐metal‐atom composition (referred to as Ag_xAu_25?x(SR)₁₈ and Cu_xAu_25?x(SR)₁₈, in which R=CH₂CH₂Ph) are reported. The identities of the particles were determined by matrix‐assisted laser desorption ionization mass spectroscopy (MALDI‐MS). Their structures were probed by fragmentation analysis in MALDI‐MS and comparison with the icosahedral structure of the homogold Au₂₅(SR)₁₈ nanoparticles (an icosahedral Au₁₃ core protected by a shell of Au₁₂(SR)₁₈). The Cu and Ag atoms were found to preferentially occupy the 13‐atom icosahedral sites, instead of the exterior shell. The number of Ag atoms in Ag_xAu_25?x(SR)₁₈ (x=0–8) was dependent on the molar ratio of Ag^I/Au^III precursors in the synthesis, whereas the number of Cu atoms in Cu_xAu_25?x(SR)₁₈ (x=0–4) was independent of the molar ratio of Cu^II/Au^III precursors applied. Interestingly, the Cu_xAu_25?x(SR)₁₈ nanoparticles show a spontaneous de‐alloying process over time, and the initially formed Cu_xAu_25?x(SR)₁₈ nanoparticles were converted to pure Au₂₅(SR)₁₈. This de‐alloying process was not observed in the case of alloyed Ag_xAu_25?x(SR)₁₈ nanoparticles. This contrast can be attributed to the stability difference between Cu_xAu_25?x(SR)₁₈ and Ag_xAu_25?x(SR)₁₈ nanoparticles. These alloyed nanoparticles are promising candidates for applications such as catalysis.     

Passive sampling and/or extraction techniques in environmental analysis: a review

The current state-of-the-art of passive sampling and/or extraction methods for long-term monitoring of pollutants in different environmental compartments is discussed in this review. Passive dosimeters that have been successfully used to monitor organic and inorganic contaminants in air, water, sediments, and soil are presented. The application of new approaches to the determination of pollutants at the sampling stage is discussed. The main milestones in the development of passive techniques for sampling and/or extraction of analytes, and in biomonitors used in environmental analysis, are summarized in this review. Passive samplers and biomonitors are compared.     

仪器定量分析中几个问题的探讨

详细介绍了分析方法的评价指标,包括检出限、测定限、灵敏度、精密度、准确度、动态范围和线性范围、抗干扰能力等,单因素优化方法与加标回收实验评定测定结果准确度的可靠性,并就分析工作中遇到的一些实际问题进行了讨论.     

氮中二氧化硫标准气体定值方法的研究

介绍用脉冲荧光分析仪对氮中二氧化硫标准气体定值的分析方法,对方法的精密度、准确度及定值的不确定度进行了考察。该方法的定值结果与重量法的配制值相一致。用该法对荷兰国家计量院制备的氮中二氧化硫标准气体进行比对试验,取得了良好的等效性。