腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

基于NPP-VIIRS夜间灯光数据的山西省GDP空间化模拟

选取山西省为研究对象,以美国国家极轨合作仪件-可见红外成像辐射计套件（NPP-VIIRS）夜间灯光数据、GDP统计数据等为数据源,构建GDP空间化拟合模型,建立山西省GDP密度图,据此研究山西省经济的空间差异性。通过对NPP-VIIRS夜间灯光数据的空间化处理,提取灯光指数,并将其与GDP进行回归拟合,建立最佳回归模型,得到GDP密度拟合图;利用县级GDP数据进行线性纠正,从而提高GDP的模拟精度。结果表明：（1）NPP-VIIRS夜间灯光数据与GDP的相关性较高,可用于山西省GDP模拟;（2）与GDP分区建模相比,GDP整体建模的精度更高;（3）山西省GDP的空间分布整体呈由城市中心逐渐向周边辐射的特点,构成GDP过渡带。     

The U.S. Department of Energy (DOE) Sampling and Analytical Chemistry Guide: Doe Methods for Evaluating Environmental and Waste Management Samples

Abstract

DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) is a guidance/methods document to support sampling and analysis activities at DOE sites. DOE Methods is intended to supplement existing guidance documents (e.g., EPA's Test Methods for Evaluating Solid Waste, SW-846), which generally apply to low-level or nonradioactive samples. DOE Methods targets the complexities of DOE radioactive mixed waste and environmental samples. The document contains quality assurance (QA), quality control (QC), safety, sampling, organic analysis, inorganic analysis, and radioanalytical guidance as well as sampling and analytical methods. An addendum is distributed every six months (April and October) with updated guidance and additional methods.

DOE Methods provides a vehicle for technology transfer within the environmental restoration (ER) and waste management (WM) (collectively known as EM) community. As DOE Methods evolves, its usefulness and applicability are anticipated to grow to meet the demands of the DOE/EM mission. At the present time, DOE Methods contains methods and guidance information supplied by DOE sites. Because the EM activities in DOE are not unique to the United States, the international environmental community could benefit from the information gathered for the DOE program. This information could provide additional resources for their EM activities.     

On the efficiency of selection criteria in spline regression

This paper concerns the cubic smoothing spline approach to nonparametric regression. After first deriving sharp asymptotic formulas for the eigenvalues of the smoothing matrix, the paper uses these formulas to investigate the efficiency of different selection criteria for choosing the smoothing parameter. Special attention is paid to the generalized maximum likelihood (GML), C _p and extended exponential (EE) criteria and their marginal Bayesian interpretation. It is shown that (a) when the Bayesian model that motivates GML is true, using C _p to estimate the smoothing parameter would result in a loss of efficiency with a factor of 10/3, proving and strengthening a conjecture proposed in Stein (1990); (b) when the data indeed come from the C _p density, using GML would result in a loss of efficiency of ; (c) the loss of efficiency of the EE criterion is at most 1.543 when the data are sampled from its consistent density family. The paper not only studies equally spaced observations (the setting of Stein, 1990), but also investigates general sampling scheme of the design points, and shows that the efficiency results remain the same in both cases.This work is supported in part by NSF grant DMS-0204674 and Harvard University Clark-Cooke Fund. Mathematics Subject Classification (2000):Primary: 62G08; Secondary: 62G20     

GM(1,1)改进模型及其应用

根据 GM( 1 ,1 )灰色模型的指数特性 ,通过在区间上求积分给出了关于背景值的一个比较确切的计算公式 ,讨论了由此建立的 GM( 1 ,1 )改进模型的适用范围和预测精度 .结果表明改进模型比原 GM( 1 ,1 )模型适用性要强、模拟和预测精度要高 ,不仅适用于低增长序列、也适用于高增长序列 ,不仅适用于短期预测 ,同样也适用于中、长期预测     

基于月球探测数据的月面地形重构方法研究

在比较不同探月任务取得的月表三维影像数据的基础上,选择中国嫦娥一号全月分幅数字高程模型（DEM）数据作为构建月表地形模型的数据源,并利用ArcGIS、Cass和AutoCAD等软件的功能及其之间的连接关系,研究了基于月球探测数据构建月表三维模型的技术和方法。以月表撞击坑Lichtenberg为例,建立了撞击坑的三维地形模型,并对其精度和影响精度的因素进行了分析。分析结果表明,对于500m分辨率的原始数据,模型误差较小,产生误差的原因主要包括生成等高线的密度、采点间距等因素。     

激光传输大气参量测量精度要求的数值分析

 就激光大气传输湍流热晕相互作用下大气参量测量误差对激光传输效果（平均功率密度）的影响进行了数值分析,并以典型的激光传输条件为例,分析了对激光大气传输影响最为敏感的3个大气参量——风速、吸收系数以及湍流结构常数的测量精度要求。综合不同传输距离下大气参量测量误差对传输效果的影响,大气风速的测量精度要求为±10%,吸收系数及湍流结构常数的测量精度要求分别为±5%和±15%。     

Two-parameter estimation with three-mode NOON state in a symmetric triple-well potential

We propose a scheme to realize two-parameter estimation via Bose–Einstein condensates confined in a symmetric triple-well potential. The three-mode NOON state is prepared adiabatically as the initial state. The two parameters to be estimated are the phase differences between the wells. The sensitivity of this estimation scheme is studied by comparing quantum and classical Fisher information matrices. As a result, we find an optimal particle number measurement method. Moreover, the precision of this estimation scheme means that the Heisenberg scaling behaves under the optimal measurement.     

某型机进近段高精度相对姿态实时测量技术

某型机在飞行训练过程中,进近段的二维相对姿态数据对于该型机安全着陆有着至关重要的作用。基于无线网络电台的双向数据传输系统能够实时获取进近段飞机相对理想着陆点的水平、垂直相对位置数据。通过上行链路上传着陆点的姿态数据,下行链路实时下传动动差分后的差分数据,最后在中心控制站进行二次数据处理。该技术获得的进近段二维相对姿态精度达到厘米级,满足飞行训练的需求。同时结合飞机显控数据以及视景图,以多角化动态关联的方式将实时获取的姿态数据等呈现给指挥员,更好地辅助指挥员进行着陆指挥工作。     

A high-current electron beam ion trap as an on-line charge breeder for the high precision mass measurement TITAN experiment

The precision of atomic mass measurements in a Penning trap is directly proportional to the charge state q of the ion and, hence, can be increased by using highly charged ions (HCI). For this reason, charge breeding with an electron beam ion trap (EBIT) is employed at TRIUMF’s Ion Trap for Atomic and Nuclear science (TITAN) on-line facility in Vancouver, Canada. By bombarding the injected and trapped singly charged ions with an intense beam of electrons, the charge state of the ions is rapidly increased inside the EBIT. To be compatible with the on-line requirements of short-lived isotopes, very high electron beam current densities are needed. The TITAN EBIT includes a 6 Tesla superconducting magnet and is designed to have electron beam currents and energies of up to 5 A and 60 keV, respectively. Once operational at full capacity, most species can be bred into a He-like configuration within tens of ms. Subsequently, the HCI are extracted, pass a Wien filter to reduce isobaric contamination, are cooled, and injected into a precision Penning trap for mass measurement. We will present the first results and current status of the TITAN EBIT, which has recently been moved to TRIUMF after assembly and commissioning at the Max-Planck-Institute (MPI) for Nuclear Physics in Heidelberg, Germany.