数值误差对能斯特方程计算结果的影响

电势和浓度通过能斯特方程相互计算时,计算结果受对方数值误差的影响。本文通过误差传递和实例研究了这种影响。结果表明：浓度误差对电势计算值的影响小,而电势误差对浓度计算值的影响大;这种现象在电子转移数较多、电势较大时更加显著。浓度为计算目标时需要重视数值误差的影响,所以代入能斯特方程的电势值应该有足够精度,或者避免使用能斯特方程,而是通过平衡常数进行计算。电势为计算目标时,浓度误差的影响较小,因此可以通过近似手段估算浓度,然后代入能斯特方程,既简化计算,又保证精度。     

用极值频率法分析数字全息的记录条件

根据全息理论,通过分析全息图光栅结构的极值频率,利用抽样定理以及频谱分离条件,分析了离轴菲涅耳全息的记录条件,得到了不同于以往文献的最小记录距离及参考光源设置表达式,并做了计算机模拟验证.结果表明：用该方法推得的离轴菲涅耳全息最小记录距离和参考光设置表达式是正确的.只有同时满足抽样条件和频谱分离条件,才能得到高质量的再现像.     

MgSiO3状态方程的分子动力学模拟

The equation of state of MgSiO3 perovskite under high pressure and high temperature is simulated using the molecular dynamics method. It was found that the molecular dynamics simulation is very successful in accurately reproducing the measured molar volumes of MgSiO3 perovskite over a wide range of temperatures and pressures. The simulated equation of state of MgSiO3 perovskite matched experimental data at up to 140GPa at 300 K, as well as the fitting data of others and results from the first-principles simulation based on the local density approximation. The simulated equations of state of MgSiO3 perovskite at higher temperatures and higher pressures also correspond to the other calculations. In addition, the volume compression data of MgSiO3 perovskite is simulated up to 120 GPa at 300, 900, 2000 and 3000 K, respectively.     

低温液体无损贮存压力升高的实验与计算

准确、简单地预测低温液体无损贮存时的压力升高具有重要的实用价值。对一低温容器利用液氮为介质进行了多次无损贮存实验,利用多元线性回归方法对实验数据进行分析和检验。分析表明无损贮存时间、初始充满率对压力升高的影响较大,而环境温度的影响可以忽略,并拟合出了压力升高的计算公式。计算结果和实验结果在很大范围内能够较好地吻合。该种计算方法在预测低温液体无损贮存压力升高时有较高的准确性与可靠性。     

大气气溶胶中有机碳和元素碳监测方法的进展

本文主要介绍和评述了近10年来大气气溶胶中的有机碳和元素碳的采样和分析技术的进展,引用参考文献41篇。     

真空中金属丝电爆炸数值模拟研究

利用金属丝电爆炸物理数学模型对电爆炸物理过程开展了数值模拟,研究了不同直径铝丝电爆炸特性,进一步分析了金属丝内沉积能量、电压击穿时刻、电压峰值随金属丝直径的变化规律,并与相关实验数据作了对比。     

高纯四氯化锗测试样品的采集和制备方法研究

针对光纤级高纯四氯化锗(99.999999%)中痕量含氢杂质吸收峰红外透过率检测(FTIR)用试样的采集,以及痕量金属杂质的电感耦合等离子体质谱法(ICP-MS)测定用试样的制备方法进行了系统研究。设计开发了用于检测痕量含氢杂质吸收峰红外透过率的样品采集实验装置,实现了含氢杂质(如—OH、—CH、HCl等)吸收峰的红外透过率在线连续测试,试样采集过程全密闭进行,避免了采样过程的二次污染,采样过程流程简短,操作简便;实验优选了在制备ICP-MS法测定痕量金属杂质用的试样过程中消除四氯化锗基体干扰、防止砷等易挥发杂质损失以及防止样品处理过程污染试样的制样方法,实现了试样制备过程二次污染源的有效控制,制样过程试剂消耗量少,制备时间短,待测元素无损失。     

Predicting ion selectivity in water purification by capacitive deionization: Electric double layer models

Ion-selective water treatment is needed to address emerging problems in an energy- and cost-efficient manner. Capacitive deionization (CDI) is a membraneless water treatment technology, which relies on storing ions in charged electric double layers (EDLs) of micropores. CDI has shown remarkable selectivity, with local density approximations (LDAs) showing some success in guiding selective separations. However, many underlying processes are represented by lumped fitting parameters in LDA models, hindering further progress. Atomistic models help unravel selectivity mechanisms, but are difficult to integrate with cell-level CDI theory. Here, we review and extend LDA models for CDI, highlight a knowledge gap in connecting between LDA and atomistic models for CDI, and emphasize and build upon analogies between micropore EDLs and nanofiltration membranes.     

Determination of hydrogen sulfide and volatile thiols in air samples by mercury probe derivatization coupled with liquid chromatography-atomic fluorescence spectrometry

A new procedure is proposed for the sampling and storage of hydrogen sulphide (H₂S) and volatile thiols (methanethiol or methyl mercaptan, ethanethiol and propanethiol) for their determination by liquid chromatography. The sampling procedure is based on the trapping/pre-concentration of the analytes in alkaline aqueous solution containing an organic mercurial probe p-hydroxymercurybenzoate, HO-Hg-C₆H₄-COO⁻ (PHMB), where they are derivatized to stable PHMB complexes based on mercury-sulfur covalent bonds. PHMB complexes are separated on a C₁₈ reverse phase column, allowing their determination by liquid chromatography coupled with sequential non-selective UV-vis (DAD) and mercury specific (chemical vapor generation atomic fluorescence spectrometry, CVGAFS) on-line detectors. PHMB complexes, S(PHMB)₂CH₃S-PHMB, C₂H₅S-PHMB and C₃H₇S-PHMB, are stable alt least for 12 h at room temperature and for 3 months if stored frozen (−20 °C).The best analytical figures of merits in the optimized conditions were obtained by CVGAFS detection, with detection limits (LODc) of 9.7 μg L⁻¹ for H₂S, 13.7 μg L⁻¹ for CH₃SH, 17.7 μg L⁻¹ for C₂H₅SH and 21.7 μg L⁻¹ for C₃H₇SH in the trapping solution in form of RS-PHMB complexes, the relative standard deviation (R.S.D.) ranging between 1.0 and 1.5%, and a linear dynamic range (LDR) between 10 and 9700 μg L⁻¹. Conventional UV absorbance detectors tuned at 254 nm can be employed as well with comparable R.S.D. and LDR, but with LODc one order of magnitude higher than AFS detector and lower specificity. The sampling procedure followed by LC-DAD-CVGAFS analysis has been validated, as example, for H₂S determination by a certified gas permeation tube as a source of 3.071 ± 0.154 μg min⁻¹ of H₂S, giving a recovery of 99.8 ± 7% and it has been applied to the determination of sulfur compounds in real gas samples (biogas and the air of a plant for fractional distillation of crude oil).