Effect of the reaction state on the polymerization of p-xylenesulfonium salts

1,4-Phenylenebis(methylene) sulfonium salts were polymerized under different conditions to yield p-xylylene sulfonium salt polyelectrolytes in a broad range of molecular weights. The aqueous reaction mixture formed a reversible gel at initial monomer concentrations higher than 1.0M, but at lower concentrations it remained as an emulsion until reaction completion. The effect of reaction time on intrinsic viscosities and polymer yields for both the emulsion and the gel state is discussed. The higher yields obtained when the reaction was carried out in the presence of a water-immiscible organic solvent were apparently due to the effect of this solvent on increasing the concentration of the reactive intermediate that led to the polyelectrolyte. Both the addition of an organic solvent and the variation of the initial monomer concentrations allowed some control over the molecular weight of the polyelectrolyte formed.     

Applications of ethylammonium and propylammonium nitrate solvents in liquid-liquid extraction and chromatography

Ethyl- and propylammonium nitrate are novel ionic solvents, liquid at room temperature, suitable for use as selective solvents for the isolation of analytes containing proton donor functional groups (alcohols, amines, phenols, carboxylic acids, etc.) by liquid-liquid distribution. These solvents form immiscible solvent pairs with non-polar aliphatic and aromatic hydrocarbons, ethers and alkyl halide solvents (e.g., methylene chloride, chloroform). Analytes can be recovered from the ionic solvents by back-extraction into ah organic solvent after dilution with water or pH buffer or, preferably, by extractive derivatization when gas chromatography is used for the analyses, avoiding the accumulation of salt on the column that results in poor baseline stability. Alkylation, acylation and particularly silylation are suitable methods for extractive derivatization using standard reaction conditions. Applications are presented for the isolation of polar analytes from an urban dust, shale oil and urine samples and for the determination of low-molecular-weight alcohols in gasahol and glycerol in soap. Liquid-liquid chromatographic systems with the liquid organic salt as stationary phase can be used to predict distribution constants for a particular separation and for the separation of polar solutes, particularly isomeric compounds possessing a proton donor functional group.     

Automated at-line solid-phase extraction-gas chromatographic analysis of micropollutants in water using the PrepStation

A fully automated at-line solid-phase extraction-gas chromatography procedure has been developed for the analysis of aqueous samples using the PrepStation. The sample extract is transferred from the sample preparation module to the gas chromatograph via an autosampler vial. With flame-ionization detection, limits of determination (S/N=10) of 0.05–0.13 μg/l were obtained for the analysis of HPLC-grade water when modifying the PrepStation by: (i) increasing the sample volume to 50 ml, (ii) increasing the injection volume up to 50 μl, and (iii) decreasing the desorption volume to 300 μl. The HP autosampler had to be modified to enable the automated “at-once” on-column injection of up to 50 μl of sample extract. The amount of packing material in the original cartridge had to be reduced to effect the decrease of the desorption volume. The total set-up did not require any further optimization after having set up the method once. The analytical characteristics of the organonitrogen and organophosphorus test analytes, i.e. recoveries (typically 75–105%), repeatability (2–8%) and linearity (0.09–3.0 μg/l) were satisfactory. The potential of the system was demonstrated by determining triazines and organophosphorus pesticides in river Rhine water at the 0.6 μg/l level using flame-ionization and mass-selective detection. No practical problems were observed during the analysis of more than 100 river water samples.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

Estimation of a quantile in some nonstandard cases

A necessary condition for the asymptotic normality of the sample quantile estimator isf(Q(p))=F(Q(p))>0, whereQ(p) is thep-th quantile of the distribution functionF(x). In this paper, we estimate a quantile by a kernel quantile estimator when this condition is violated. We have shown that the kernel quantile estimator is asymptotically normal in some nonstandard cases. The optimal convergence rate of the mean squared error for the kernel estimator is obtained with respect to the asymptotically optimal bandwidth. A law of the iterated logarithm is also established.This research was partially supported by the new faculty award from the University of Oregon.     

Titantetrafluorid – Eine überraschend einfache Kolumnarstruktur

Titanium Tetrafluoride – a Surprising Simple Column Structure For the first time single crystals of TiF₄ have been obtained by solvothermal decomposition of (O₂)₂Ti₇F₃₀ in anhydrous HF. The colourless, transparent needles crystallize orthorhombic in spacegroup Pnma–D (No. 62) with a = 2 281.1, b = 384.8, c = 956.8 pm, Z = 12. The new type of structure is dominated by isolated columns of corner-linked TiF₆-octahedra.     

Preparation and characterization of Fully stoichiometric SrCoO3 by electrochemical oxidation

A nearly stoichiometric SrCoO₃ phase had been prepared up to now only using high oxygen pressure. A new method for preparing fully stoichiometric SrCoO₃ has been proposed using electrochemical oxidation. Brownmillerite-type SrCoO_2.50 is oxidized into a completely stoichiometric perovskite at a potential of 500 mV for 180 hours at room temperature in alkaline media (1 M KOH). The oxidized phase has a cubic unit cell (a=383.5 pm). It is metallic and, at temperatures below T=280 K, it shows ferromagnetic behavior. The magnetic moment at 0 K is 2.1 μ_B. The physical properties of SrCoO_3.00 have been explained in terms of partial occupancy of a σ*e band.     

木质素磺酸镁接枝丙烯酰胺的影响因素

天然高分子化合物木质素是木材水解工业和造纸工业的副产物。早期人们在研究纤维素同甲基丙烯酸甲酯、丙烯腈的接枝反应中时发现了木质素的接枝反应活性[1],Meisterh和Patil[2]则实现了将—CONH2接枝于木质素的设想,雷中方[3]等研究了木质素同具有较好吸附能力的—CONH2的接枝改性,并讨论了改性产物的水处理性能,他们所用的木质素是采用酸析法从碱法草浆黑液中提取的。本文以酸法制浆的红液 木素磺酸镁为原料,合成了木质素 丙烯酸胺接枝共聚物,并对接枝聚合过程中的引发体系、引发剂浓度、反应温度、木素与单体用量比、固液比等影…     

锕系多重键金属有机化合物研究进展

多重键金属有机化合物在多种催化反应中已经得到广泛的应用, 并取得了很好的研究成果. 目前, 多重键金属有机化合物的研究已成为催化化学领域中一个引人注目的研究热点. 综述了锕系多重键金属有机化合物的研究进展. 根据化合物多重键的不同, 分别讨论了它们的合成及反应性能, 并定性讨论了多重键的性质.     

At-column injector for capillary GC — design and evaluation

The present paper describes constructional details and evaluations of an at-column injector for capillary GC. Injections were made via a sample loop on a 0.32 mm i.d. capillary column. Two rotary valves were employed to allow a wash of the sample loop and a backflush of the transfer line. Repeatability, calculated from absolute area counts for n-alkanes was between 0.3–1% RSD, for injected sample volumes between 5 and 100 μl. Promising results were also obtained with syringe-based injections on narrow bore (100 μ i.d.) columns. Repeatability on the basis of normalized area counts was in the order of 0.1–0.2% RSD, while solvent tailing was practically absent.