环境内分泌干扰素分析方法进展

本文详细介绍了国内外环境内分泌干扰素的分析研究进展。着重介绍了环境样品的预处理方法，并进行了比较和评价，对不同环境样品中内分泌干扰素的分析检测方法进行了介绍。     

Pressurized wet digestion in open vessels

The High Pressure Asher (HPA-S) was adapted with a Teflon liner for pressurized wet digestion in open vessels. The autoclave was partly filled with water containing 5% (vol/vol) hydrogen peroxide. The digestion vessels dipped partly into the water or were arranged on top of the water by means of a special rack made of titanium or PTFE-coated stainless steel. The HPA-S was closed and pressurized with nitrogen up to 100 bars. The maximum digestion temperature was 250 °C for PFA vessels and 270 °C for quartz vessels. Digestion vessels made of quartz or PFA-Teflon with volumes between 1.5 mL (auto sampler cups) and 50 mL were tested. The maximum sample amount for quartz vessels was 0.5–1.5 g and for PFA vessels 0.2–0.5 g, depending on the material. Higher sample intake may lead to fast reactions with losses of digestion solution. The samples were digested with 5 mL HNO₃ or with 2 mL HNO₃+6 mL H₂O+2 mL H₂O₂. The total digestion time was 90–120 min and 30 min for cooling down to room temperature. Auto sampler cups made of PFA were used as digestion vessels for GFAAS. Sample material (50 mg) was digested with 0.2 mL HNO₃+0.5 mL H₂O+0.2 mL H₂O₂. The analytical data of nine certified reference materials are also within the confidential intervals for volatile elements like mercury, selenium and arsenic. No cross contamination between the digestion vessels could be observed. Due to the high gas pressure, the diffusion rate of volatile species is low and losses of elements by volatilisation could be observed only with diluted nitric acid and vessels with large cross section. In addition, cocoa, walnuts, nicotinic acid, pumpkin seeds, lubrication oil, straw, polyethylene and coal were digested and the TOC values measured. The residual carbon content came to 0.2–10% depending on the sample matrix and amount.     

Flow injection in-valve-mini-column pretreatment combined with ion chromatography for cadmium, lead and zinc determination

A flow injection (FI) in-valve-mini-column packed with Chelex-100 resin is proposed for on-line sample pretreatment for some metal ions, namely, Cd(II), Pb(II) and Zn(II), prior to simultaneous determination using ion chromatography (IC). A solution containing a mixture of the cations was first passed through the in-valve-mini-column, followed by on-line elution. The eluate was then flowed further to an injection valve and was injected into an ion chromatograph. Conditions of the system were optimized. A single standard calibration was possible. The recoveries of cations were found to be in the range of 95–105%. The developed method was applied to the accurate analysis of zinc ore samples.     

Air sampling of aromatic hydrocarbons in the presence of ozone by solid-phase microextraction

Effects of ozone on air sampling of standard gas mixtures of aromatic hydrocarbons were tested using solid-phase microextraction (SPME). Standard concentrations of ozone ranging from 10 ppb (v/v) to 6400 ppm (v/v) were generated using an in-house built ozone generator based on corona discharge. Effects of temperature, discharge voltage, and oxygen flow on the ozone generation were tested. The working dc voltage had the greatest effect on generated ozone concentration and was proportional to the ozone concentration. Generation temperature and oxygen flow rate were inversely proportional to ozone concentrations. Produced ozone was mixed with standard benzene, toluene, ethylbenzene, and xylenes (BTEX) gas at less than 100 ppb (v/v). Air samples were collected with poly(dimethylsiloxane) (PDMS) 100 microm SPME fibers and analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Significant reductions of BTEX concentrations were observed. In addition, some products of BTEX-ozone-oxygen reactions were identified. SPME worked well as a rapid sampler for BTEX and BTEX-ozone-oxygen reaction products. No significant deterioration of the PDMS coating and no significant reduction of absorption capacity were observed after repeated exposure to ozone.     

Separation of Xylene Isomers in the Anion-Pillared Square Grid Material SIFSIX-1-Cu

Xylene isomer separation is considered one of the seven separation challenges that changed the world. In addition, the high-energy demand of xylene separation highlights the need for efficient novel adsorbents. Herein, the liquid-phase separation potential of the anion-pillared hybrid material SIFSIX-1-Cu was studied for preferential adsorption of o-xylene and m-xylene over p-xylene, which was inspired by a previous complexation crystallization method for separating m-xylene. We report detailed experimental liquid-phase adsorption experiments, yielding selectivities of 3.0 for o-xylene versus p-xylene and 2.6 for m-xylene versus p-xylene. Our theoretical calculations thus provide a reasonable explanation that the xylene adsorption selectivity is attributed to the C−H⋅⋅⋅F interaction, and the host–guest interaction order agrees with the adsorption priority: o-xylene > m-xylene > p-xylene.     

Capillary electrophoretic analysis of whole blood samples for hemoglobin-based oxygen carriers without the use of immunoprecipitation

Hemoglobin-based oxygen carriers (HBOCs) are blood substitutes, synthesized by polymerizing hemoglobin, which are being developed and investigated as alternatives to blood for medical purposes. However, due to their ability to increase the oxygen carrying capacity when taken by healthy individuals, HBOCs have been used as a doping agent among endurance athletes and are included in the World Anti-Doping Agency's Prohibited List. To maintain the fairness of competitions and continue the battle against doping, it is essential to be able to detect HBOCs if present in an athlete's blood. To achieve this goal, it is necessary to differentiate HBOCs from the native hemoglobin and to do so in a cost and time effective manner. We have developed a rapid capillary zone electrophoresis (CZE), UV absorbance, method capable of detecting HBOCs, in whole blood samples, at levels below those considered necessary to provide a performance enhancement. Our approach to the analysis for HBOCs utilizes the whole blood sample, not just the plasma, and does not require the use of immunoprecipitants to ensure accurate analysis. By lysing the red blood cells and using centrifugal filtration, followed by our CZE separation, we are able to effectively distinguish between native hemoglobin and HBOCs. Through this method, we have been able to reliably detect concentrations of HBOCs at the equivalent of 5.5 g/L, the equivalent to a 3.5% increase in blood hemoglobin concentration for an athlete.     

Electrophoretically driven SDS removal and protein fractionation in the shotgun analysis of membrane proteomes

SDS is mostly used to enhance the solubilization and extraction of membrane proteins due to its strong detergency and low cost. Nevertheless, SDS interferes with the subsequent procedures and needs to be removed from the samples. In this work, a special gradient gel electrophoresis (GGE) system was developed to remove SDS from the SDS-solubilized protein samples. As a proof-of-principle experiment, the GGE system was designed to be composed of an agarose loading layer, six polyacrylamide fractionation layers with different concentrations and a high-concentration polyacrylamide sealing layer. The advantages of the GGE system are that it not only can electrophoretically remove SDS efficiently so that the protein loss resulted from the repeated gel washing after electrophoresis was avoided, but also can reduce the complexity of the sample, prevent the precipitation of proteins after loading and avoid the loss of proteins with low molecular weight during the electrophoresis. Using GGE system, about 85% of SDS in the sample and gel was electrophoretically removed and the proteins were fractionated. Compared with the two representative gel-based sample cleanup methods reported in literature, GGE-based strategy significantly improved the identification efficiency of proteins in terms of the number and coverage of the identified proteins.     

Combination of solid-phase extraction-hollow fiber for ultra-preconcentration of some triazole pesticides followed by gas chromatography-flame ionization detection

In this study, an extraction and preconcentration technique using solid-phase extraction (SPE) along with hollow fiber (HF) has been developed as an ultra-preconcentration technique for some triazole pesticides in aqueous samples. Triazole pesticides were employed as model compounds to assess the method and were monitored by gas chromatography-flame ionization detection (GC-FID). Initially, an aqueous solution of target analytes was passed through an RP-8 SPE cartridge and then the adsorbed analytes were eluted with μL amounts of toluene. The collected elute was slowly introduced into an HF that had one end blocked. This allowed precipitation inside the lumen and pores of the HF. Finally, the obtained HF was mounted on a home-made solid-phase microextraction syringe and entered into the GC injection port for thermal desorption-GC analysis. The effect of various experimental parameters including injection port temperature, desorption time, state of HF, washing solvent, elution solvent and its volume, sample volume, etc. were investigated for finding the optimum conditions. The calibration graphs were linear in the ranges of 2-1000 ng/mL (penconazole and hexaconazole), 5-1000 ng/mL (tebuconazole), 15-1000 ng/mL (triticonazole) and the detection limits (LODs) ranged from 0.6 to 4.5 ng/mL. The enhancement factors were in the range of 870-950. The relative standard deviations (RSD%) for five repeated experiments (C=250 ng/mL of each pesticide) varied from 4.5 to 8.7%. The relative recoveries obtained for analytes in grape juice samples, spiked with different levels of each pesticide, were in the range of 87-119%.     

A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Numerical simulation of DNA sample preconcentration in microdevice electrophoresis

A numerical model is presented for the accurate and efficient prediction of preconcentration and transport of DNA during sample introduction and injection in microcapillary electrophoresis. The model incorporates conservation laws for the different buffer ions, salt ions, and DNA sample, coupled through a Gaussian electric field to account for the field modifications that cause electromigration. The accuracy and efficiency required to capture the physics associated with such a complex transient problem are realized by the use of the finite element-flux corrected transport (FE-FCT) algorithm in two dimensions. The model has been employed for the prediction of DNA sample preconcentration and transport during electrophoresis in a double-T injector microdevice. To test its validity, the numerical results have been compared with the corresponding experimental data under similar conditions, and excellent agreement has been found. Finally, detailed results from a simulation of DNA sample preconcentration in electrophoretic microdevices are presented using as parameters the electric field strength and the other species concentrations. The effect of the Tris concentration on sample stacking is also investigated. These results demonstrate the great potential offered by the model for future optimization of such microchip devices with respect to significantly enhanced speed and resolution of sample separation.