Ion-selective electrode for gallium determination in nickel alloy, fly-ash and biological samples

A poly(vinyl chloride)-based membrane of 2,9-dimethyl-4,11-diphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene (DDTCT) with sodium tetraphenyl borate (STB) as an anion excluder and dibutyl phthalate (DBP), dibutyl butylphosphonate (DBBP), tris(2-ethylhexyl) phosphate (TEP) and tributyl phosphate (TBP) as plasticizing solvent mediators was prepared and investigated as a Ga(III)-selective electrode. The best performance was observed with the membrane having the ligand-PVC-DBP-STB composition 1:4:1:1, which worked well over a wide concentration range (1.45 × 10⁻⁶ to 0.1 mol L⁻¹) with a Nernstian slope of 28.7 mV per decade of activity between pH 4.0 and 10.0. This electrode showed a fast response time of 12 s and was used over a period of 100 days with good reproducibility (s = 0.3 mV). The selectivity coefficients for monovalent, divalent and trivalent cations indicate excellent selectivity for Ga(III) ions over a large number of cations. Anions such as Cl⁻ and SO₄²⁻ do not interfere and the electrode also works satisfactorily in partially water-alcohol medium. The practical utility of the membrane sensor has also been observed in solutions contaminated with detergents, i.e., cetyltrimethylammonium bromide and sodium dodecyl sulfate and used for the determination of gallium in nickel alloy, fly-ash and biological samples.     

微波增压溶样-石墨炉原子吸收光谱法同时测定植物性样品中微量铅镉

使用微波增压溶样法，将样品用HNO3—HClO4溶解后，用石墨炉原子吸收光谱法同时测定植物性样品中铅和镉。以磷酸二氢铵—硝酸镁作为基体改进剂，可使灰化温度大大提高，克服了基体的干扰。铅和镉的回收率分别为95．3％—104．8％和96．2％—105．5％，RSD分别为4．8％-7．2％和4．3％-7．6％。     

Kinetic Analysis of Cobalt in Veterinary Products

A novel kinetic method for the determination of trace amounts of Co(II) has been developed. The proposed method based on the catalytic effect of Co(II) on the oxidation of xylenol orange tetra sodium salt by H₂O₂ in the presence of cationic surfactant (N‐dodecylpyridinium chloride). Co(II) at μg.mL^?1 was determined spectrophotometrically by measuring the decrease in the absorbance of xylenol orange at 577 nm by the differential method. The method is precise, selective, and sensitive. The detection limit of the procedure was 0.058 μg.mL^?1. The relative standard deviation for the replicate determination (n = 6) of 0.7 μg.mL^?1 was 1.285%. The results compared satisfactorily with those of atomic absorption spectrometry. The method was successful for the analysis of Co(II) in veterinary and synthetic samples.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

β-Cyclodextrin-polyurethane polymer as solid phase extraction material for the analysis of carcinogenic aromatic amines

β-Cyclodextrin-polyurethane (β-CDPU) polymer was synthesized by the reaction of β-cyclodextrin with hexamethylene diisocyanate in dry dimethylformamide and used as a sorbent for the solid phase extraction (SPE) of carcinogenic aromatic amines from water. The polymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and particle size analysis. The separation and quantification was performed by Liquid chromatography with RP-C₁₈ column and diode array detection using standard arylamines for quantification. When compared with commercially available sorbents, β-CDPU gave better recovery for the aromatic amines. From the variation of pH of the extractant from 4.0 to 8.5 recovery was highest at pH 8.5. The breakthrough volume has been ascertained to be 100 ml for 200 mg of the resin. The new SPE material offers better recovery and estimation of banned arylamines.     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.     

Derivatisation in gas chromatographic determination of acidic herbicides in aqueous environmental samples

This paper reviews derivatisation processes applied in chromatographic determination of acidic herbicides (with carboxyl and phenol groups), mainly in aqueous environmental samples. The discussion focuses on the basic derivatisation reactions used to convert herbicides to derivatives to make them analysable by gas chromatography, and possibly to reduce detection limits and/or increase extraction recovery from aqueous samples. The reactions are transesterification, esterification, silylation, alkylation, and extractive and pyrolytic alkylation. The reagents used to conduct the reactions are numerous. Diazomethane is a very efficient methylation reagent but explosive and toxic. Methyl iodide also ensures rapid and efficient methylation. Benzyl bromide can be used directly in water but derivatisation yield is low and reproducibility is poor. Butyl chloroformate and dimethyl sulfite can also be used for derivatisation in water, and acetic anhydride can be used for in-situ derivatisation of phenolic herbicides. For increasing selectivity of GC detection pentafluorobenzyl bromide (for ECD) and (2-cyanethyl)dimethyl(diethylamino)silane (for NPD) have been applied. Very characteristic ions are produced in mass spectra if silyl groups are introduced, e.g. by using bis(trimethylsilyl)trifluoroacetamide. Tetramethylammonium, trimethylphenylammonium, tetraalkylammonium, and trimethylsulfonium hydroxides and salts can by used for derivatisation at elevated temperature in the GC injection port. Extractive alkylation is relatively efficient if tetraalkylammonium salts with long chain alkyl groups are used.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Ruthenium(II) complexes with mono and ditertiary arsines and phosphines and their reaction with small molecules

Dichlorotetrakis(dimethylsulphoxide)ruthenium(II) reacts with AsPh₃ AsMePh₂, AsMe₂Ph and SbPh₃ in ethanolic hydrochloric acid solution to yield the complexes RuCl₂(DMSO)₂(AsPh₃)₂, RuCl₂(DMSO) L₂ (L = AsMePh₂, AsMe₂Ph, SbPh₃) respectively. The treatment of ruthenium(II) blue solution with AsMePh₂, AsMe₂Ph and SbPh₃ in alcohol resulted in the formation of the complexes; RuCl₂L₃ (L = AsMePh₂, AsMe₂Ph and SbPh₂), respectively. The reaction of RuCl₂(DMSO)₄ with the bidentate ligands 1,2 bis (diphenylarsino)methane (DPAM), 1,2 bis(diphenylarsino)ethane (DPAE) and 1,2 bis (diphenylphosphino)methane (DPPM). 1,2 bis(diphenylphosphino)ethane (DPPE), in ethanol gave the complexes RuCl₂(DPAM)₂, RuCl₂(DPAE)₂, RuCl₂ (DPPM)₂ RuCl₂(DPPE)₂, respectively. The complexes thus obtained undergo reaction with carbon monoxide, hydrogen, molecular nitrogen and nitric oxide to yield a variety of mixed ligand complexes.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.