Synthesis of PbTiO3 ceramics using mechanical alloying and solid state sintering

The pressure-less sintering behavior of PbTiO₃ powders synthesized by mechanical alloying TiO₂ and PbO was investigated using dilatometry and Rietveld refinements of X-ray diffraction patterns. As-synthesized, the powders are nanocrystalline with a mean particle size of 20 nm. Pressure-less sintering in the range 500-1050°C gives single phase ceramics with densities of 85-90% and crystallite sizes in the range 80-400 nm. Cracking due to the paraelectric-ferroelectric phase transition was not observed in samples sintered below 700°C due to the small crystallite size whereas macroscopic cracks formed in samples sintered above 700°C. Rietveld analysis indicates the formation of Pb vacancies in samples sintered and held for 24 h at intermediate temperatures (600-1000°C) which gives some insight into the mechanism of Pb loss and second phase formation in this system.     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

Modeling of an inductively coupled plasma at reduced pressures

Plasma sintering experiments in this laboratory at reduced pressures revealed efficient heating of the ceramic sample due to recombination of dissociated and/or ionized species on the surface. For establishing a model for this plasma sintering process, it is necessary to first consider the plasma itself. Therefore, a suitable model for an RF inductively coupled plasma has been developed considering reduced pressures. As the pressure decreases, the electron density also decreases at a fixed electron temperature, causing substantial deviations from chemical equilibrium. Due to the poor collisional coupling between electrons and heavy particles at reduced pressures, large deviations from kinetic equilibrium have also to be expected. The model is based on a rotationally symmetric plasma contained in a quartz tube. The power level ranges from 1.5 to 3 kW and the operating pressure is varied from 1 to 0.01 atm. Both deviations from chemical and kinetic equilibrium are included in this model. Thermodynamic and transport properties for two-temperature plasmas are used for this modeling work. The results indicate that for pressures below 0.1 atm, there is a strong ambipolar flux of charge carriers to the confining walls, leading to significant variations of the temperature across the tube. The electron temperature increases rapidly as the pressure decreases, whereas the heavy-particle temperature decreases.     

Effect of Copper on Solid Electrolytes (Ce0.8Sm0.2)1 ? xCuxO2 ? δ and Composite Cathodes Based on La0.8Sr0.2MnO3

The phase composition and electroconduction in air of solid electrolytes (Ce_0.8Sm_0.2)_{1 − x} Cu_xO_{2 − δ} (CSCu), where x = 0, 2, 5, 10, and 20 mol % and which are synthesized using the ceramic technology, are studied. Adding an additive of CuO lowers the CSCu sintering temperature by 100– 200°C and leads to the formation of single-phase solid solutions of a fluorite type up to x = 10 mol %. The electroconductivity of the CSCu electrolytes remains practically invariant upon adding up to 5 mol % Cu and equals 0.089–0.095 and 0.017–0.021 S cm⁻¹ at 800 and 600°C. The sintering, adhesion, and electroconductance of composite cathodes based on La_0.8Sr_0.2MnO₃ with 40% CSCu and their electrochemical behavior in air in the temperature interval 900–1000°C on carrying electrolyte Zr^0.9Y_0.1O_1.95 with a CSCu sublayer containing 2 mol % Cu are studied.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 656–661.Original Russian Text Copyright © 2005 by Bogdanovich, Gorelov, Balakireva, Dem’yanenko.     

Raman Spectroscopy Investigation of Nano Hydroxyapatite Doped with Yttrium and Fluoride Ions

In this study, nano hydroxyapatite doped with yttrium (2.5, 5, and 7.5 mol%) and fluoride (2.5 mol%) ions were synthesized by precipitation method and sintered at 900°C, 1100°C, and 1300°C. Raman spectroscopy was applied to track the structural modifications in pure and doped hydroxyapatites. The results showed that the main characteristic band of pure hydroxyapatite at 963 cm^?1 was not affected significantly by ion doping but exhibited higher intensity with increasing sintering temperature. Due to fluoride substitution, the 1048 and 1034 cm^?1 bands of pure hydroxyapatites appeared with a wavenumber shift in the spectra of ion-doped hydroxyapatites. The 333 cm^?1 band of pure hydroxyapatite disappeared and an additional calcium–fluor bond at 322 cm^?1 was observable in ion-doped hydroxyapatites. Two fluorescence bands at 770 and 697 cm^?1, which were also observed in the spectra of pure hydroxyapatites, shifted to higher wavenumbers in the spectra of ion-doped hydroxyapatites. This was considered to result from the perturbation in the hexagonal structure of hydroxyapatite due to yttrium and fluoride codoping.     

DYE SENSITIZED TITANIA PHOTOVOLTAIC CELLS ON FLEXIBLE SUBSTRATES—CONCEPT TO COMMERCIALIZATION

ABSTRACT

Methods have been found for sintering titania nanoparticles at low temperature, e.g., <150°C, and for rapid sensitization of the sintered particles. This discovery means that dye-sensitized, titania solar cells can be made on flexible substrates, such as poly(ethylene terephthalate), in a continuous roll-to-roll manufacturing process. The ability to produce solar cells in a continuous fashion should substantially lower the cost of the cells compared to batch processed, on-glass cells. The combined attributes of spectral sensitivity, flexibility, light weight, impact resistance and low cost should find utility a variety of handheld appliances in both indoor and outdoor situations. In its most advanced state of development, this technology would find application in off-grid power generation and thus provide the opportunity of bringing solar generated electricity to rural areas of the world.     

硫酸铜掺杂TiO2涂层对碳纤维抗氧化性能的影响

采用溶胶-浸渍法,以CuSO₄为烧结助剂在碳纤维表面制得TiO₂涂层。利用XRD、SEM和TEM分析了涂层相组成及形貌,通过静态等温氧化实验考察了涂层碳纤维抗氧化性能。结果表明：掺杂CuSO₄制备TiO₂涂层均匀完整致密,涂层相组成均为锐钛矿型TiO₂,且涂层厚度从45 nm提高至185 nm;与普通TiO₂涂层碳纤维相比,完全氧化温度从667 ℃上升到800 ℃,氧化活化能从118.390 kJ·mol^-1提高到152.562 kJ·mol^-1,CuSO₄的掺杂大大提高了TiO₂涂层碳纤维的抗氧化性能。     

On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Structural and magnetic studies on spark plasma sintered SmCo5/Fe bulk nanocomposite magnets

SmCo₅+x wt% Fe (x=0$x=0$, 5 and 10) nanocomposite powders were synthesized by mechanical milling and were consolidated into bulk shape by spark plasma sintering (SPS) technique. The evolution of structure and magnetic properties were systematically investigated in milled powders as well as in SPS samples. A maximum coercivity of 8.9 kOe was achieved in spark plasma sintered SmCo₅+5 wt% Fe sample. The exchange spring interaction between the hard and soft magnetic phases was evaluated using δM–H measurements and the analysis revealed that the SPS sample containing 5 wt% Fe had a stronger exchange coupling between the magnetic phases than that of the sample with10 wt% Fe.     

固相烧结法制备锂离子电池正极材料Li2FeP2O7及其电化学性能研究

介绍了一种先冷冻干燥后固相烧结制备正极材料Li₂FeP₂O₇的方法. 利用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和傅里叶变换红外光谱(FTIR)对材料的组成和形态进行表征, 并通过循环伏安曲线(CV)和电化学阻抗谱(EIS)研究了Li₂FeP₂O₇材料的电化学性能. 研究发现, 合成Li₂FeP₂O₇的最佳温度为590 ℃, 此温度下反应较完全且产物杂质较少, 1.6C倍率下的放电比容量达到55 mA·h·g^?1, 明显高于其它温度下合成样品的放电比容量. 该温度下合成的Li₂FeP₂O₇还具有低阻抗和较大的交换电流密度, 说明这种合成方式有利于提高锂离子在Li₂FeP₂O₇中的扩散.