气提浓缩仪分析水中痕量挥发性有机物研究

本文描述了气提浓缩仪的设计及操作程序用于对水中痕量挥发性有机物的测定。分析物被气提吸附于TenaxGC柱上,然后直接脱附到毛细管气相色谱柱上进行分析,并用FID或MS鉴定。本文除对色谱条件进行优化外,对气提时间和脱附温度等分析操作条件也进行了研究。检测下限为0.01-0.30PPb,峰面积检测精度优于6.9％,对16种化合物的回收率优于74％。     

Effect of biotic and abiotic stresses on volatile emission of Achillea collina Becker ex Rchb

This study describes the application of headspace solid-phase microextraction (HS-SPME)–gas chromatography/mass spectrometry (GC/MS) to characterise the volatile fingerprint changes of Achillea collina, induced by aphids' infestation, mechanical damage and jasmonic acid (JA) treatment. The volatile organic compound profiles of A. collina, Prunus persica and Pisum sativum infested by Myzus persicae were also compared. Several changes were observed between control, infested, mechanically damaged and JA-treated plants, and new inducible volatile organic compounds (IVOCs) were emitted in response to biotic or abiotic stresses. Some of these were in common for all stresses and other compounds were in common only for two types of stress. Conversely some IVOCs were emitted only in response to the specific stimuli. The results suggested that there were species-specific and common IVOCs emitted by A. collina, P. persica and P. sativum in response to M. persicae infestation. In conclusion, HS-SPME–GC/MS seems to be a reliable analytical approach to study in vivo plant reaction to external stimuli.     

Gas Chromatography - Mass Spectroscopy (GC/MS) of Single and Double Spin Adducts of PBN and the Hydroxylamines of Corresponding Structure

Abstract

The GC/MS spectra of the methyl adduct of PBN as the aminoxyl and as the corresponding hydroxylamine are reported. Similar results are obtained with higher alkyl analogues. With excess alkyl Grignard the O-alkyl hydroxylamine ether (PBN double adduct) is obtained if the solution is exposed to O₂ in the presence of the alkyl spin adduct of PBN. A mechanism involving radical trapping by the alkyl spin adduct is proposed.     

The Observation of Metastable Transitions in a High Resolution Double Focussing Mass Spectrometer

Three metastable transitions are observed with 3₁ 5-t-butyldimethylsiloxy-dehydrosterone (BDMS-DHEA) by detecting their daughter ion at m/z 269 in a double focussing mass spectrometer. Because of their specificity, the transitions of molecular ion could be served as quantitation routes for the determination of the steroid in human blood plasma using direct insertion probe with ionization chamber temperature ≥230°C. Thus, as is in MS/MS it would significantly reduce sample work-up time and possibly eliminate the need for a GC separation in detecting the level of this steroid in human blood.     

Sample introduction in high speed capillary gas chromatography; input band width and detection limits

The speed of analysis in capillary gas chromatography can be substantially increased by reduction of the column inner diameter. However, special demands are then posed upon instrumental design. In particular, the sampling system is highly critical because it has to be capable of delivering extremely small injection band widths which must be compatible with the column inside diameter. This study focuses on the evaluation of two potentially suitable sample introduction systems with respect to input band width and detection limits and their compatibility with small bore (≦ 100 μm) columns in capillary gas chromatography. One of them allows liquid on-column injection, based on liquid splitting, of only a few nl onto small bore (≦ 100 ?m) fused silica columns. For gases, input band widths as low as 1 ms are obtained with this system. The other one is part of a miniaturized gas chromatograph with extremely low dead volume interfaces and detector volumes. It allows input band widths for gases of a few ms. Without any preconcentration ppm concentrations are measured in gaseous samples with a 80 ?m thick film capillary column. It will be shown that a further reduction of the minimum detectable amount and analysis time is possible with this equipment.     

Mechanism of plasma polymerization ofN-silyl-substituted cyclodisilazane: Structure and properties of polymer film

NN-Bis(dimethylsilyl)tetramethylcyclodisilazane (NSCDSN) was selected for plasma polymerization as a model monomer representing N-silyl-substituted cyclodisilazanes. Owing to the aromatic character resulting from the strong (d-p) coupling between silicon and nitrogen atoms, these compounds manifest the highest thermal stability among the organosilicones. GC/MS examination of a low-molecular-weight fraction evaporated from the plasma polymer revealed the presence of various monomer derivatives having mostly the general structure of N-silyl-substituted cyclodisilazane (Si₄N₂) units. GC/MS and ATR/IR studies have shown that the Si₄N₂ skeleton displays a high resistance to plasma fragmentation and that it was incorporated as such into the polymer film. A radical mechanism for plasma polymerization was postulated assuming the formation of and propagation precursors. The low value found for the polar component of the surface free energy confirmed the contribution of Si₄N₂ units to the polymer film. TGA investigation showed the rate and degree of thermal decomposition of plasma-polymerized (PP) NSCDSN to be lower than those of plasma polymers from N-hydrogen-substituted silazanes. Vacuum pyrolysis, at 800°C, converted the polymer film into a glassy, dense, and almost inorganic material with a strong adhesion to the metal substrates.     

Description of a Method for Automated Determination of Organic Pollutants in Water

Abstract

A method for automated determination of 73 organic pollutants in water is described. The compounds, which are key representatives for different types of pollutants are determined in two chromatographic runs. 11 halogenated aliphatic hydrocarbons are determined using capillary GC equipped with electron capture detector. The remaining pollutants, representing both basic/neutral and acidic compounds are determined by using GC/MS combined with an automated search computer program. The majority of the compounds have a limit of quantitation at 1 ig/1 or lower. The precision of the GC method is in the range of 1.8% to 4.3%, with an average of 3.2%. The precision for compounds determined by GC/MS is in the range of 1% to 38%, with an average of 14%.

So far 30 water samples representing both polluted fjord areas as well as effluents from municipal treatment plants, refineries, petrochemical industries and metallurgic industries have been analysed. The method has been found to be an interesting alternative to traditional methods for monitoring water quality, and has demonstrated its potential both as a screening method for detecting “hot spots” as well as for routine monitoring of specific hazardous compounds.     

Nonlinear variation of sorption parameters of n-alkane homologsl in temperature-programmed gas chromatography (tpgc) and new equation for calculation of retention indixces

It has been demonstated that the considaerable difference in temperature increments of sorption parameters of n-alkanes under isothermal conditions is the main reason for nonlinear dependence of sorption parameters on molecular mass of homolog in temperaturre programmed gas chromatography (TPGC). A new nonlinear 4th parameter equation has been given for calculation of the retention indices. Coefficients of the equation are calculated from n-alkanes. The equation allows extrapolation and interpolation calculations of retention indices under TPGC conditions with experimental precision. The results obtained; for fatty acidkl methyl esters demonstrate the advantage of ovr equation in comparison with van den Dool and Kratz's equation.     

Temperature programmed retention indices: Calculation from isothermal data. Part 1: Theory

Direct conversion of isothermal to temperature programmed indices is not possible. In this work it is shown that linear temperature programmed retention indices can only be calculated from isothermal retention data if the temperature dependence of both the distribution coefficients and the column dead time are taken into account. Procedures are described which allow calculation of retention temperatures and from these, accurate programmed retention indices. Within certain limits the initial oven temperature and programming rate can be chosen freely. The prerequisite for this calculation is the availability of reliable isothermal retention data (retention times, retention factors, relative retention times, or retention indices) at two different temperatures for one column. The use of compiled isothermal retention indices at two different temperatures for the calculation of retention temperatures and thus temperature programmed indices is demonstrated. For the column for which programmed retention indices have to be determined, the isothermal retention times of the n-alkanes and the column dead time as a function of temperature have to be known in addition to the compiled data for a given stationary phase. Once the programmed retention indices have been calculated for a given column the concept allows the calculation of temperature programmed indices for columns with different specifications. The characteristics which can be varied are: column length, column inner diameter, phase-ratio, initial oven temperature, and programming rate.     

Enhancing the Limit of Detection for Comprehensive Two‐Dimensional Gas Chromatography (GC×GC) using Bilinear Chemometric Analysis

The chemometric method referred to as the generalized rank annihilation method (GRAM) is used to improve the precision, accuracy, and resolution of comprehensive two‐dimensional gas chromatography (GC×GC) data. Because GC×GC signals follow a bilinear structure, GC×GC signals can be readily extracted from noise by chemometric techniques such as GRAM. This resulting improvement in signal‐to‐noise ratio (S/N) and detectability is referred to as bilinear signal enhancement. Here, GRAM uses bilinear signal enhancement on both resolved and unresolved GC×GC peaks that initially have a low S/N in the original GC×GC data. In this work, the chemometric method of GRAM is compared to two traditional peak integration methods for quantifying GC×GC analyte signals. One integration method uses a threshold to determine the signal of a peak of interest. With this integration method only those data points above the limit of detection and within a selected area are integrated to produce the total analyte signal for calibration and quantification. The other integration method evaluated did not employ a threshold, and simply summed all the data points in a selected region to obtain a total analyte signal. Substantial improvements in quantification precision, accuracy, and limit of detection are obtained by using GRAM, as compared to when either peak integration method is applied. In addition, the GRAM results are found to be more accurate than results obtained by peak integration, because GRAM more effectively corrects for the slight baseline offset remaining after the background subtraction of data. In the case of a 2.7‐ppm propylbenzene synthetic sample the quantification result with GRAM is 2.6 times more precise and 4.2 times more accurate than the integration method without a threshold, and 18 times more accurate than the integration method with a threshold. The limit of detection for propylbenzene was 0.6 ppm (parts per million by mass) using GRAM, without implementing any sample preconcentration prior to injection. GRAM is also demonstrated as a means to resolve overlapped signals, while enhancing the S/N. Four alkyl benzene signals of low S/N which were not resolved by GC×GC are mathematically resolved and quantified.