Solubility Measurements of Surfactants and Dissolution of Cytochrome c in 1,1,1,2‐Tetrafluoroethane Modified with Organic Solvents

The solubilities of four surfactants, sodium bis‐2‐ethylhexyl sulfosuccinate (AOT), cetyltrimethylammonium chloride, didodecyldimethylammonium bromide, and n‐dodecyltrimethylammonium chloride in liquid refrigerant 1,1,1,2‐tetrafluoroethane (R134a) modified with methanol, ethanol, and 2‐propanol were measured. The measurements were performed under 25 and 50 bar at 25 °C. The solubility of AOT was as high as 92 mM in R134a with addition of 2% ethanol. Cytochrome c molecules were then verified to be soluble in the AOT‐containing and ethanol‐modified R134a solution. Accordingly, liquid R134a is suggested as a potential extraction solvent for hydrophilic compounds.     

Voltammetric Determination of Antibacterial Nitro‐Compounds at Activated Carbon Fibre Microelectrodes

The electrochemical behavior of the nitrofuran antibiotics nitrofurantoin (NFA) and nitrofurazone (NFZ), as well as the related nitroimidazole drug, metronidazole (MNZ) at electrochemically activated carbon fibre microelectrodes (CFMEs) is reported. These nitrofurans have been widely used in the form of feed additives for the treatment of gastrointestinal infections in cattle, pigs and poultry. Electrochemical activation of CFMEs by repetitive square‐wave (SW) voltammetric scans between 0.0 and +2.6 V, produced an unexpected high cathodic response from these compounds. This is attributed to the increase of the carbon fibre surface area due to its fracture and the appearance of deep fissures along the main fibre axis. Penetration of the nitroderivative compounds into the micro‐channels of the activated fibres was profited to develop a sensitive and selective method for NFA based on stripping SW voltammetry. The metabolite of NFA, 1‐aminohydantoin (AHD), did not exhibit cathodic response in the potential range between ?0.9 and +0.1 V. However, AHD gave a SW oxidation signal at activated CFMEs, with a potential of +0.95 V, which did not appear at non‐activated microelectrodes. Based on this finding, the simultaneous determination of NFA and AHD was performed by amperometry using two activated CFMEs in a parallel configuration connected to a multichannel detector. This methodology was also used to carry out degradation studies of NFA in acidic and basic media under photodegradation or thermal degradation conditions.     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Stereochemical analysis of N-cyclohexylidene-N-(1-phenylethyl)amine derivatives

The configurational properties of a series of cyclohexylidene imines are discussed on the basis of their 1H, 13C and 15N NMR spectral data.     

A two-stage approach to automatic determination of 1H NMR coupling constants

(1)H NMR scalar coupling constants are a rich source of information on molecular structure, but their extraction from spectra can be less than straightforward. Previous approaches to J extraction include methods proposed by Hoye, Golotvin, and the 'modified J-doubling' method. Here we describe the ACCA method, currently implemented in the NMR package MestReC, which allows a high degree of automation in the extraction of coupling patterns even in the case of complex multiplets with sublinewidth splitting. The new approach is illustrated by application to strychnine, for which it has detected previously unreported couplings.     

The Reactivity of Cr‐Te Superlattice Reactants and of Co‐deposited Cr‐Te Films: Studies with in‐situ X‐ray Diffractometry

The reactivity of a Cr‐Te multilayer film consisting of 326 Cr/Te double‐layers with about 88(3) at% Te was investigated with in‐situ X‐ray diffraction. The occurrence of a superstructure reflection caused by the multilayer system is observed. During the annealing procedure between 80 and 90 °C the layer‐by‐layer arrangement is destroyed and elemental Te crystallizes. After 6 h isothermal annealing at 140 °C CrTe₃ starts to crystallize. The amount and the crystal size of CrTe₃ increase with raising temperature and Te is consumed during the growth process. At 220 °C the formation of crystalline Cr₂Te₃ is observed and between 220 and 260 °C CrTe₃ is completely decomposed into Cr₂Te₃. The two Cr tellurides grow as highly textured materials. The size of CrTe₃ crystals is significantly larger than that of Cr₂Te₃. For a co‐deposited Cr‐Te film with composition 77(3) at% Te the tri‐telluride and elemental Te crystallize simultaneously. The texture of CrTe₃ is less pronounced and different reflections of the tri‐telluride occur besides the (h00)‐reflections. Up to 160 °C a pronounced increase of the crystallite size is observed and the crystals are significantly larger than those obtained with the multifilm sample. At 130 °C the crystallization kinetics seem to be controlled by nucleation.     

Predicting the shape and structure of face-centered cubic gold nanocrystals smaller than 3 nm.

Although a number of computational studies have examined the relative stability of icosahedral and decahedral gold clusters from 1 to 3 nm in size, few studies have focussed on the variety of face-centered cubic (fcc) nanoparticles in this size regime. In most cases small fcc gold particles are assumed to adopt the truncated octahedral shape, but in light of the fact that the shape and structure of gold nanoparticles is known to vary, the relative stability of fcc polyhedra may change with size. Presented here are results of first-principles calculations investigating the preferred shape of gold particles less than 3 nm in size. Our results indicate that the equilibrium shape of fcc gold nanoparticles less than 1 nm is the cuboctahedron, but this shape rapidly becomes energetically unstable with respect to the truncated octahedron, octahedron and truncated cube shapes as the size increases.     

烷氧桥相连的四苯基双金属卟啉配合物的红外光谱研究

研究了烷氧桥相连的四苯基双卟啉及其Ｍｎ（Ⅱ），Ｆｅ（Ⅲ），Ｃｏ（Ⅱ）配合物的红外光谱（３６００～１５０ｃｍ＾－１），对一些主要吸收谱带进行了经验归属，金属敏感谱带出现１５５８．２（以Ｈ２Ｐ－Ｈ２Ｐ为例）、１４７７．２，１４０１．９，１３５０．５，１００１．７，９６５．９，８７７．３和７９８．８ｃｍ＾－１附近，金属和烷氧桥都敏感的谱带出现在１５９５．１（以Ｈ２Ｐ为例）、１４９１．１，８５１．１和７２     

Analytical assays based on detecting conformational changes of single molecules.

One common strategy for the detection of biomolecules is labeling either the target itself or an antibody that binds to it. Herein, a different approach, based on detecting the conformational change of a probe molecule induced by binding of the target is discussed. That is, what is being detected is not the presence of the target or the probe, but the conformational change of the probe. Recently, a single-molecule sensor has been developed that exploits this mechanism to detect hybridization of a single DNA oligomer to a DNA probe, as well as specific binding of a single protein to a DNA probe. Biomolecular recognition often involves large conformational changes of the molecules involved, and therefore this strategy may be applicable to other assays.     

Determination of Nonsteroidal Anti‐inflammatory Drugs in Serum by Microchip Capillary Electrophoresis with Electrochemical Detection

A simple and rapid method has been developed for the analysis of four nonsteroidal anti‐inflammatory drugs (NSAIDs) in serum using microchip capillary electrophoresis with pulsed amperometric detection. The selected NSAIDs (salicylic acid, acetaminophen, diflunisal, and diclofenac) are among the most commonly used drugs to treat fever, inflammation, and pain. Used above the therapeutic levels, these drugs can cause a wide variety of adverse effects and their fast analysis could have a significant impact in treatment and recovery of the patients. Several conditions, including separation potential, pH, and concentration of the electrolyte solution were studied to optimize the separation and detection. In this study, salicylic acid, acetaminophen, diflunisal, and diclofenac were separated in less than 2 minutes using a 5 mM borate buffer at pH 11.5 and a separation potential of +1200 V. Linear relationships were obtained between the concentration and peak current in the 0.5–15.3 μg/mL range and detection limits around 0.26 μg/mL. After 30 consecutive injections, the stability of both the response and migration time of the analytes showed relative related deviations of less than 4.6% and 1.0%, respectively. The potential of this method was verified by spiking a bovine serum sample with the four NSAIDs and analyzing the recovery ratio.