次近邻相互作用对Heisenberg XX链纠缠影响的研究

研究了存在次近邻相互作用(耦合)时Heisenberg XX链的纠缠特性. 结果表明对近邻格点, 随着耦合常数J的变化, 次近邻相互作用的存在可能使其纠缠度增大或者减小; 而对次近邻格点, 引进次近邻相互作用却可以产生纠缠, 并且使其随着|J|的增大而增大. 近邻格点间纠缠存在的临界温度T_c随着J的增大而降低, 次近邻格点间纠缠存在的临界温度T_c随着|J|的增大而升高. 此外对纠缠W态的制备, 次近邻相互作用的存在还使得三量子位情形时W态产生的时刻改变, 而对于四量子位情形却没有影响.     

Thermal properties of poly(styrene) containing brominated aryl phosphate additives

General purpose poly(styrene) is a large volume commodity polymer widely used in a range of applications. For many of these the presence of an additive to impart some flammability resistance is required. Most commonly, brominated aromatics are used for this purpose. As the polymer undergoes combustion these compounds decompose to generate bromine atoms and/or hydrogen bromide which escape to the gas phase and trap flame propagating radicals. While these species are effective in inhibiting flame propagation they present the opportunity for loss of halogen to the atmosphere. For this reason, the use of these compounds is being limited in some parts of the world. Phosphorus compounds, on the other had, impart a flame retarding influence by promoting char formation at the surface of the burning polymer. This prevents heat feedback to the polymer and consequent pyrolysis to generate fuel fragments. The combination of both bromine and phosphorus present in a single compound might generate a superior flame-retarding additive in that both modes of retardancy might be promoted simultaneously. Should this be the case smaller amounts of additive might be necessary to achieve a satisfactory level of flame retardancy. A series of such additives, brominated aryl phosphates, has been synthesized and fully characterized spectroscopically. Blends of these additives, at various levels, with poly(styrene) have been examined by DSC, TG and in the UL-94 flame test. The flammability of the polymer is dramatically diminished by the presence of the additive.     

Spatiotemporal and Thermal Analysis of VCSEL for Short-range Gigabit Optical Links

High-speed Optoelectronic Modules using Vertical Cavity Surface Emitting Lasers (VCSEL) coupled to Multi Mode Fibers (MMF) are a performing and low-cost solution for 10 Gigabit Ethernet (10 GbE) in short-distance optical links. A complete model of the spatiotemporal behavior of multimode VCSELs, through static and dynamic response, noise, thermal effects, and its coupling to MMF has been investigated. Relative Intensity Noise shows modal dependence and can be affected by spatial filtering due to coupling and fiber propagation. Simulations permit to evaluate critical parameters, such as modulation formats, launching conditions, and operating temperature for global bandwidth and eye diagram optimization up to 10 Gb/s. Simulation results are compared to measurements on prototype optoelectronic modules.     

Pulsed pump: Thermal effects in solid state lasers under super-Gaussian pulses

Solid state laser (SSL) powers can be realistically scaled when pumped by a real, efficient and multimode pulse. In this work, a fourth-order super-Gaussian pulse was assumed as a pump for SSL’s and a complete analytical expression for the thermal phase shift is given. Moreover, the focal length of thermal lens in paraxial ray approximation regime was studied. The results when applied to a Ti: sapphire crystal show an appreciable correction for abberation compared to a top-hat pulse.     

Effect of a thermal radiation field on the γ-luminescence of alkali-silicate glass

We revealed the changes in the γ-luminescence spectra under the influence of a thermal radiation field on high-purity alkali-silicate glasses (I) and those with addition of Fe³⁺ ions (II). We explain the obtained results within the framework of the L-model of edge absorption and electron-hole recombination processes. Samarkand State University, 15, Universitetskii Bul., Samarkand, 703004, Republic of Uzbekistan. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 453–455, May–June, 1998.     

Synthesis,characterization, spectroscopy and thermal analysis of rare earth picrate complexes with <Emphasis Type="Italic">L</Emphasis>-lysine

Summary Rare earth picrate (RE) complexes with L-lysine (Lys) were synthesized and characterized. Elemental analysis (CHN), EDTA titrations and thermogravimetry data suggest a general formula RE(pic)₃·2Lys·2H₂O, where RE=La-Lu (without Pm) and Y, pic=picrate). IR spectra suggest that Lys is coordinated to the central ion through the nitrogen of the α-amino group. Parameters obtained from the absorption spectrum of the Nd compound indicated that the metal-ligand bonds are essentially electrostatic. Emission spectrum and biexponential behavior of the luminescence decay of the Eu compound suggest the existence of polymeric species. Thermogravimetric/derivative thermogravimetric (TG/DTG) and differential scanning calorimetry (DSC) curves of all complexes are very similar, with five events. The final products are the corresponding rare earth oxides and their X-ray diffraction patterns are identical to the calcinated oxides.</o:p>     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.