Development and Validation of Liquid Chromatography Method for the Separation of Valdecoxib and its SC‐77852 Impurity

Abstract

A reversed‐phase liquid chromatography method has been developed for the separation of valdecoxib and impurity SC‐77852. The best results were achieved using a mobile phase—methanol: 1% water solution TEA (52∶48 v/v), pH 7.35 (adjusted with 85% orthophosphoric acid), column temperature 24°C. Separation was carried out on XTerra? RP₁₈ (150 mm×4,6 mm), particle size 5 µm, flow rate 1 ml/min, using detection on 220 nm. The method was statistically validated for its selectivity, linearity, precision (repeatability), and robustness. Quantitation and detection limits were determined for both valdecoxib and SC‐77852. Method robustness was further evaluated by performing full factorial design experiment. Validated method was used for assay of valdecoxib and SC‐77852 in Bextra^® film‐coated tablets.     

Chiral separation of agricultural fungicides

Fungicides are very important and diverse environmental and agricultural concern species. Their determination in commercial formulations or environmental matrices, requires highly efficient, selective and sensitive methods. A significant number of these chemicals are chiral with the activity residing usually in one of the enantiomers. The different toxicological and degradation behavior observed in many cases for fungicide enantiomers, results in the need to investigate them separately. For this purpose, separation techniques such as GC, HPLC, supercritical fluid chromatography (SFC) and CE have widely been employed although, at present, HPLC still dominates chromatographic chiral analysis of fungicides. This review covers the literature concerning the enantiomeric separation of fungicides usually employed in agriculture grouping the chiral separation methodologies developed for their analysis in environmental, biological, and food samples.     

Short Chain Branches Distribution Characterization of Ethylene/1-Hexene Copolymers by Using TREF + 13C-NMR and TREF + SC Methods

Summary: Short chain branches distribution (SCBD) is the key factor for high density polyethylene (HDPE) pipe materials to achieve their excellent performance for long term (50 years) applications. However, the precise SCBD characterization of these HDPE materials with relatively low content of comonomer incorporation still remained as a challenge in this field. In this work, two characterization methods, namely temperature rising elution fractionation (TREF) cross step crystallization (SC) (TREF + SC) and TREF cross ¹³C-NMR (TREF + ¹³C-NMR), have been respectively used to qualitatively and quantitatively investigate the SCBD for two HDPE pipe materials (PE-1 and PE-2 with different long term performances) with small amount of 1-hexene incorporation prepared from SiO₂-supported silyl chromate catalyst system (S-2 catalyst) during UNIPOL gas phase polymerization. The comparison of SCBD between the two samples showed that: although short chain branches of PE-2 with good performance were less than those of PE-1 with bad performance, PE-2 showed less comonomer incorporation on the low crystallinity and low molecular weight (MW) fractions keeping even higher comonomer incorporation on the high crystallinity and high MW parts compared with PE-1. This difference on the SCBD for PE-1 and PE-2 was thought to be the key factor which is responsible for their great difference on environment slow crack resistance (ESCR). Moreover, TREF + SC method further reflected the intra- and inter-molecular heterogeneities of each fraction from the two HDPE samples through the lamella thickness distribution compared with TREF + ¹³C-NMR.     

固相配位化学反应研究(LXI)——[Cu(SC(Ph)NHPh)(PPh_3)_2X](X+Cl,Br,I)的固相合成和晶体结构(X=Cl)

SC(Ph)NHPh,CuX(X=Cl,Br,I)和PPh_3的固相反应产物经CS_2处理得红黄色立方晶体[Cu(SC(Ph)NHPh)(PPh_3)_2X],其中X=Cl的单晶用X射线衍射法收集晶胞参数,此晶体属单斜晶系,空间群P2_1/c,α=1.8013(5)nm,b=1.4588(5)nm,c=1.7222(4)nm,β=105.54(3)°,F=4.3601nm~3,Z=4。中心铜离子以扭曲四面体配位,Cu原子周围的平均键角为109.4°,其中Cu—S键、Cu—Cl键、Cu—P(1)键和Cu—P(2)键的键长分别为0.2352(3)nm、0.2375(4)nm、0.2297(4)nm和0.2282(3)nm.     

Signal processing of GC-MS data of complex environmental samples: characterization of homologous series

Identification and characterization of homologous series by GC-MS analysis provide very relevant information on organic compounds in complex mixtures. A chemometric approach, based on the study of the autocovariance function, EACVF_tot, is described as a suitable tool for extracting molecular-structural information from the GC signal, in particular for identifying the presence of homologous series and quantifying the number of their terms. A data pre-processing procedure is introduced to transform the time axis in order to display a strictly homogenous retention pattern: n-alkanes are used as external standard to stretch or shrink the original chromatogram in order to build up a linear GC retention scale. This addition can be regarded as a further step in the direction of a signal processing procedure for achieving a systematic characterization of complex mixture from experimental chromatograms. The EACVF_tot was computed on the linearized chromatogram: if the sample presents terms of homologous series, the EACVF_tot plot shows well-defined deterministic peaks at repeated constant interdistances. By comparison with standard references, the presence of such peaks is diagnostic for the presence of the ordered series, their position can be related to the chemical structure of the compounds, their height is the basis for estimating the number of terms in the series. The power of the procedure can be magnified by studying SIM chromatograms acquired at specific m/z values characteristic of the compounds of interest: the EACVF_tot on these selective signals makes it possible to confirm the results obtained from an unknown mixture and check their reliability.The procedure was validated on standard mixtures of known composition and applied to an unknown gas oil sample. In particular, the paper focuses on the study of two specific classes of compounds: n-alkanes and oxygen-containing compounds, since their identification provides information useful for characterizing the chemical composition of many samples of different origin. The robustness of the method was tested in experimental chromatograms obtained under unfavorable conditions: chromatograms acquired in non-optimal temperature program conditions and chromatographic data affected by signal noise.     

Further thermoanalytical investigations of annealed keratins: The time and temperature dependence

DSC investigations of various keratins, modified keratins, and keratin model substances have shown that the first of the two endothermic peaks in the temperature range 230 °–255 °C is a microfibrillar helix peak and that the area under the peak represents a measure of the relative helix content of the sample. The peak area of every untreated keratin sample is equal to 100 % and decreases continuously with increasing extension or thermal degradation of the fiber. The relative helix content of annealed keratins depends upon the annealing time and the annealing temperature. Short annealing times at high temperatures, principally, have the same effect as long annealing times, at lower temperatures with one decisive difference: In the first case, the helix peak maximum is shifted to lower temperatures and, in the second case, to higher temperatures. It seems that these shifts, combined with amino acid analyses, are essential to the further understanding of the complicated thermal decomposition of keratins.     

Profile of Parkia speciosa Hassk Metabolites Extracted with SFE using FTIR‐PCA Method

A rapid identification, classification and discrimination tool, using Fourier Transform Infrared (FTIR) spectroscopy combined with Principal Component Analysis (PCA), was developed and applied to determine the profile of the Supercritical Fluid Extraction (SFE) of Parkia speciosa seeds under various temperature and pressure conditions (313, 323, 333, 343, 353 and 363 K and 20.68, 27.58, 34.47, 41.37, 48.26, and 55.16 MPa). The separation and identification of the compounds was carried out by Gas Chromatography coupled with Time of Flight Mass Spectrometry (GC/TOF‐MS). This technique has made it possible to detect the variability obtained under different SFE conditions and the separation of different chemical compounds in P. speciosa seeds. The FTIR‐PCA results were verified by GC/TOF‐MS, and the FTIR‐PCA method successfully identified the unsaturated carboxylic acids with the highest percentage area under the different conditions.     

Preparative size exclusion chromatography combined with detergent removal as a versatile tool to prepare unilamellar and spherical liposomes of highly uniform size distribution

Detergent removal from mixed micelles was combined with preparative size exclusion chromatography (SEC) on Sephacryl S 500 HR to prepare unilamellar and spherical liposomes of defined sizes between 50 and 100 nm with a very narrow size distribution (RSD of vesicle diameter between 13% and 25%). For neutral phosphatidylcholine and negatively charged phosphatidylcholine/phosphatidylglycerol liposome preparations, efficient sizing at the preparative scale was demonstrated by analyzing isolated SEC peak fractions with cryo-transmission electron microscopy and dynamic light scattering. The number-weighted average vesicle diameters obtained using both methods are in very good agreement for fractions of low polydispersity.     

Tunneling conductance through the half-metal/conical magnet/superconductor junctions in the adiabatic and non-adiabatic regimes: Self-consistent calculations

The tunneling conductance through the half-metal/conical magnet/superconductor (HM/CM/SC) junctions is investigated with the use of the Bogoliubov–de Gennes equations in the framework of Blonder–Tinkham–Klapwijk formalism. Due to the spin band separation in the HM, the conductance in the subgap region is mainly determined by the anomalous Andreev reflection, the probability of which strongly depends on the spin transmission in the CM layer. We show that the spins of electrons injected from the HM can be transmitted through the CM to the SC either adiabatically or non-adiabatically depending on the period of the spatial modulation of the exchange field. We find that the conductance in the subgap region oscillates as a function of the CM layer thickness wherein the oscillations transform from the irregular pattern in the non-adiabatic regime to the regular one in the adiabatic regime. For both adiabatic and non-adiabatic transport regimes the conductance is studied over a broad range of parameters determining the spiral magnetization in the CM. We find that in the non-adiabatic regime, the decrease of the exchange field amplitude in the CM leads to the emergence of the conductance peak for the particular CM thickness in agreement with recent experiments.     

HTS电流引线助推超导磁体应用开发

对磁体致冷是维持超导态必不可少的条件,由于深低温技术的复杂性和昂贵的造价曾制约了超导磁体应用的推广,其中电流引线是磁体系统最主要热负荷。经历高温超导(HTS)材料20多年的研发,人们认识到产生强磁场的超导磁体仍需运行在30K以下。热导率与不锈钢可比的HTS材料在80K以下可承载电流而无焦耳热,采用HTS电流引线可使超导磁体的致冷运行费和设备投资大幅度降低,操作简便。因此,它是超导磁体扩大应用的助推器。介绍其使用特点和应用举例。