Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

SBA-15介孔分子筛负载型过渡金属催化燃烧脱除乙腈废气

制备了具有规则孔道结构和较高比表面积的SBA-15介孔分子筛,采用真空旋转蒸发法将过渡金属(Cu,Co,Cr和Mn)负载到SBA-15表面,得到负载型过渡金属催化剂,并将其用于含氰废气催化燃烧的实验中,考察了其催化活性.催化剂的理化性能通过X射线衍射(XRD)、氮气吸附-脱附、透射电子显微镜(TEM)、H2-程序升温还...     

Modified SBA-15 as the carrier for metoprolol and papaverine: Adsorption and release study

A series of modified SBA-15 materials were applied in drug delivery systems. The internal surface of siliceous hexagonal structure of SBA-15 was modified with different amount of (3-mercaptopropyl)trimethoxysilane (MPTMS) and oxidized in the presence of hydrogen peroxide. The sulfonated material was loaded with metoprolol tartrate or papaverine hydrochloride. Both drugs indicated strong chemical interaction with modified mesoporous surface. The characteristic of the obtained materials was performed with XRD and DRUV-vis spectrometry, themogravimetry and nitrogen adsorption (BET) measurements. The obtained results show that modification of the mesoporous materials leads towards significant decrease of the drug delivery rate.     

担载钒氧化物催化剂对丙烷选择氧化性能

用等体积浸渍法制备了SBA-15担载的钒基氧化物催化剂,使用X射线衍射（XRD）分析、氮气吸附、紫外激光拉曼、傅里叶变换红外（FTIR）光谱和紫外-可见漫反射（UV-Vis DRS）光谱对催化剂的结构进行了表征,并评价了催化剂对丙烷选择氧化的活性与选择性.实验结果表明SBA-15载体对丙烷选择氧化的活性优于常规的SiO₂载体.SBA-15担载的低载量催化剂是高分散的催化剂体系,在低钒载量（n（V）/n（Si）<2.5%）时,催化剂具有规则的六方介孔结构.低钒载量（n（V）/n（Si）<0.1%）时,隔离四配位的钒氧化物是丙烷选择氧化生成醛类化合物的活性物种;高钒载量（n（V）/n（Si）>2.5%）时,聚合六配位的钒氧化物和微晶钒氧化物是丙烷脱氢或深度氧化的活性物种.     

Preparation of highly ordered mesoporous AlSBA-15-SO3H hybrid material for the catalytic synthesis of chalcone under solvent-free condition

Single-step preparation of SBA-15 materials functionalized with both propylsulfonic acid groups and aluminum species (AlSBA-15-SO₃H) was carried out by hydrothermal treatment of a mixture of aluminum isopropoxide, 3-mercaptopropyltriethoxysilane, tetraethoxysilane, and triblock copolymer surfactant. At Si/Al molar ratio of 11-96, the materials exhibited well-ordered hexagonally arranged mesopores with pore diameter of ca. 9 nm, BET surface area of 546.9-666.0 m² g⁻¹, and pore volume of 0.82-1.03 cm³ g⁻¹. As-prepared AlSBA-15-SO₃H was successfully used in the Claisen-Schmidt condensation reaction of benzaldehyde with acetophenone to produce chalcone under solvent-free condition, and the influence of the reaction parameters including temperatures, molar ratios of BZD to APN, and aluminum loadings were considered during the chalcone synthesis procedure. It showed that AlSBA-15-SO₃H exhibited significantly high catalytic activity and selectivity, outperforming the reference catalysts such as sulfuric acid, ZSM-5, and acidic MCM-49. In addition, the catalytic stability and regeneration of AlSBA-15-SO₃H was studied.     

不同助剂对CuO-ZnO/SBA-15催化CO_2加氢制甲醇性能影响的研究

以硅质骨架结构介孔分子筛SBA-15为载体,采用浸渍法合成CuO-ZnO/SBA-15(CZ/SBA-15)、CuO-ZnO-MnO_2/SBA-15(CZM/SBA-15)、CuO-ZnO-ZrO_2/SBA-15(CZZ/SBA-15)三组多孔催化剂,在固定床反应器上评价了各组催化剂催化CO_2加氢合成甲醇的性能,同时结合N_2吸附-脱附(BET)、X射线衍射(XRD)、H_2程序升温还原(H_2-TPR)、程序升温脱附(H_2-TPD、CO_2-TPD)、N_2O滴定、X射线光电子能谱(XPS)、透射电子显微镜(TEM)等表征研究了不同助剂对CO_2催化加氢制甲醇的影响。结果表明,催化剂中的金属氧化物改变了SBA-15分子筛载体的孔径大小和比表面积;催化剂CuO-ZnO-MnO_2/SBA-15、CuO-Zn O-ZrO_2/SBA-15中铜的分散度(D_(Cu))和比表面积(A_(Cu))更大,表面CuO粒径更小,更易被还原;相比Mn-O簇,Zr-O簇为增强了碱性位点,提高了甲醇选择性。此外,CuO-ZnO-ZrO_2/SBA-15具有更高的氧空位浓度,催化活性更好,其甲醇选择性为25.02%,与CuO-ZnO/SBA-15、CuO-ZnO-Mn O_2/SBA-15相比分别提高了28%和136.9%,催化效果最好。     

Enhanced blue emission from ZnS–ZnO composites confined in SBA-15

A new optical material, the ZnO nanoparticles that are modified with ZnS and confined in SBA-15, has been prepared through the controllable sulfuration at relatively low temperature (40 °C) from the ZnO/SBA-15 composites. The precursor composites can be prepared through a novel path in which the zinc is well dispersed by directly grinding zinc nitrate into the as-synthesized SBA-15 occluded with template followed by calcination, and it is possible to control the conversion of ZnO to ZnS by adjusting the reaction time. The resulting samples are characterized by XRD, nitrogen adsorption–desorption and photoluminescence (PL) spectroscopy. ZnO–ZnS composites, mainly confined in the mesopore of SBA-15, exhibit dramatically enhanced blue emission at the expense of the UV emission.     

Direct synthesis and characterization of phenyl-functionalized SBA-15

Phenyl-functionalized SBA-15 materials (Ph-SBA-15) were directly synthesized by using tri-block copolymer Pluronic P123 as templating agent under acidic conditions. The samples were characterized by Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and N₂ adsorption-desorption. The results show that the phenyl groups are covalently attached to the pore wall of SBA-15 after modification. The functionalized materials still preserve a desirable two-dimensional P6mm hexagonal structure and have large specific surface area and pore volume although the molar ratio of phenyltrimethoxysilane in total silica precursors is as high as 23.0%.     

A mesoporous silica/fluorinated alcohol adduct: an efficient metal-free,three-component synthesis of indazolophthalazinetrione heterocycles using a reusable nanoporous/trifluoroethanol adduct (SBA-15/TFE)

The channels of mesoporous (SBA-15) represent a straightforward reactor for the rapid synthesis of indazolophthalazinetrione skeletons via three-component coupling reactions in 2,2,2-trifluoroethanol. The solid SBA-15 and TFE could be recovered and reused. The present method carries the advantage of being performed under neutral conditions and requires no activation or modification of the substrates.     

以SBA-15为硅源合成多级孔SAPO-11分子筛及其在正十二烷临氢异构化中的应用

以脱除模板剂后的SBA-15为硅源和间接模板剂,在水热条件下制备多级孔SAPO-11分子筛,并通过XRD、SEM、红外光谱、氮气物理吸附-脱附等表征手段对样品的晶相、形貌、酸性和织构性质进行表征。结果表明,以焙烧后的SBA-15为硅源合成出纯相的SAPO-11分子筛,且SBA-15已完全转化。合成的SAPO-11样品呈空心的近方柱体形貌,由宽度为100 nm左右的细条聚集而成,晶粒粒径为1-3 μm。与白炭黑、硅溶胶合成的常规SAPO-11分子筛对比发现,添加SBA-15可在SAPO-11中引入介孔孔道,孔径为5-10 nm,且样品以中强度的Brønsted酸为主,弱Brønsted酸相对较少。以正十二烷为探针分子,考察Pt/SAPO-11催化剂的临氢异构化反应性能。结果表明,多级孔Pt/SAPO-11催化剂具有优良的异构化反应性能。催化剂的高活性和选择性与SAPO-11分子筛的酸性质和孔道结构密切相关,中强度的Brønsted酸量的增加有助于活性提高,同时介孔孔道有利于产物扩散,异构产物的选择性明显提高。