聚醚醚酮酮（PEEKK）和含联苯结构聚醚醚酮酮（PEBEKK）共聚物的SAXS研究

应用一维电子密度相关函数方法，对含不同联苯结构的ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物样品小角Ｘ射线散射（ＳＡＸＳ）去模糊强度分析计算表明：ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物的聚集态结构明显地依赖于共聚物中联苯含量。当联苯含量ｎｂ＝０．３５时，积分不变量Ｑ，长周期Ｌ，平均结晶片层厚ｄ，电子密度差η_ｃ－η_ａ和结晶度Ｗ_（ｃ，ｘ）值为最小，比表面积Ｏ_ｓ为最大。     

A deblurring procedure for two-dimensional small angle X-ray scattering patterns

A general pre-processing procedure of the measured SAXS patterns for reducing the effect of beam stop and beam stop holder is described. A proper method for automatically choosing the regularization parameter is implemented. The method works out on the two-dimensional SAXS patterns. After deblurring, the corresponding two-dimensional patterns will be converted into one-dimensional integrated intensity distribution curves. We tested the program using both calculated artificial data and real experimental data such as polystyrene and poly(methyl methacrylate) latices. The deblurred results are satisfactory showing the effectiveness of the method. The deblurring process of a typical two-dimensional SAXS pattern using the Matlab based program can be completed in few seconds on normal personal computers.     

Curcumin-Encapsulated Hexagonal Liquid Crystalline Formed by Brij 97/NaDC Mixtures

The phase diagram of a five-components Brij 97-NaDC/IPM-PEG 400/H₂O system was determined at 25°C. The hexagonal liquid crystalline phase (H₁) was found in this system. By use of small-angle x-ray scattering (SAXS), polarization microscopy, and rheology techniques, the influence of composition, temperature, and addition of curcumin on H₁ phase was studied. It is shown that: 1) the investigated hexagonal liquid crystals exhibit a strong shear thinning behavior and viscoelasticity and the strength of the network of H₁ phase becomes weaker with increasing oil content; 2) the frequency-dependent moduli of H₁ samples decreases as the temperature increases and the steady-state limiting viscosity of the hexagonal samples shows an Arrhenius-like dependence on temperature; and 3) samples in H₁ phase containing curcumin retained their organized hexagonal structure. The SAXS results show that the curcumin molecules may be solubilized both into the apolar core of cylinders together with IPM and in the polar domain coexisting with PEG 400 between the cylinders. When curcumin is encapsulated in samples with low oil content, there is a significant decrease in the frequency-dependent moduli. The tendency of frequency behavior for samples incorporating curcumin as a function of temperature is weakened.     

Charge Neutralization Drives the Shape Reconfiguration of DNA Nanotubes

Reconfiguration of membrane protein channels for gated transport is highly regulated under physiological conditions. However, a mechanistic understanding of such channels remains challenging owing to the difficulty in probing subtle gating‐associated structural changes. Herein, we show that charge neutralization can drive the shape reconfiguration of a biomimetic 6‐helix bundle DNA nanotube (6HB). Specifically, 6HB adopts a compact state when its charge is neutralized by Mg²⁺; whereas Na⁺ switches it to the expanded state, as revealed by MD simulations, small‐angle X‐ray scattering (SAXS), and FRET characterization. Furthermore, partial neutralization of the DNA backbone charges by chemical modification renders 6HB compact and insensitive to ions, suggesting an interplay between electrostatic and hydrophobic forces in the channels. This system provides a platform for understanding the structure–function relationship of biological channels and designing rules for the shape control of DNA nanostructures in biomedical applications.     

Plasticization and cocrystallization in LLDPE/wax blends

The structure and thermal properties of linear low‐density polyethylene (LLDPE)/medium soft paraffin wax blends, prepared by melt mixing, were investigated by differential scanning calorimetry (DSC) and small‐ and wide‐angle X‐ray scattering (SAXS and WAXS). The blends form a single phase in the melt as determined by SAXS. Upon cooling from the melt, two crystalline phases develop for blends with more than 10 wt % wax characterized by widely different melting points. The wax acts as an effective plasticizer for LLDPE, decreasing both its crystallization and melting temperature. The higher melting point crystalline phase is formed by less branched LLDPE fractions. On the other hand, the lower melting point crystalline phase is a wax‐rich phase constituted by cocrystals of extended chain wax and short linear sequences of highly branched LLDPE chains. The presence of cocrystals was evidenced by standard DSC results, successive self‐nucleation and annealing (SSA) thermal fractionation and by the detection of a new SAXS signal attributed to the lamellar long period of the cocrystals. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1469–1482     

Transmission X‐ray scattering as a probe for complex liquid‐surface structures

The need for functional materials calls for increasing complexity in self‐assembly systems. As a result, the ability to probe both local structure and heterogeneities, such as phase‐coexistence and domain morphologies, has become increasingly important to controlling self‐assembly processes, including those at liquid surfaces. The traditional X‐ray scattering methods for liquid surfaces, such as specular reflectivity and grazing‐incidence diffraction, are not well suited to spatially resolving lateral heterogeneities due to large illuminated footprint. A possible alternative approach is to use scanning transmission X‐ray scattering to simultaneously probe local intermolecular structures and heterogeneous domain morphologies on liquid surfaces. To test the feasibility of this approach, transmission small‐ and wide‐angle X‐ray scattering (TSAXS/TWAXS) studies of Langmuir films formed on water meniscus against a vertically immersed hydrophilic Si substrate were recently carried out. First‐order diffraction rings were observed in TSAXS patterns from a monolayer of hexagonally packed gold nanoparticles and in TWAXS patterns from a monolayer of fluorinated fatty acids, both as a Langmuir monolayer on water meniscus and as a Langmuir–Blodgett monolayer on the substrate. The patterns taken at multiple spots have been analyzed to extract the shape of the meniscus surface and the ordered‐monolayer coverage as a function of spot position. These results, together with continual improvement in the brightness and spot size of X‐ray beams available at synchrotron facilities, support the possibility of using scanning‐probe TSAXS/TWAXS to characterize heterogeneous structures at liquid surfaces.     

Microfibril diameter in celery collenchyma cellulose: X-ray scattering and NMR evidence

Cellulose isolated from celery collenchyma is typical of the low-crystallinity celluloses that can be isolated from primary cell-walls of higher plants, except that it is oriented with high uniformity. The diameter of the microfibrils of celery collenchyma cellulose was estimated by three separate approaches: ¹³C NMR measurement of the ratio of surface to interior chains; estimation of the dimensions of the crystalline lattice from wide angle X-ray scattering (WAXS) measurements using the Scherrer equation; and the observation that microfibrils of this form of cellulose have the unusual property of packing into an irregular array from which small angle X-ray scattering (SAXS) shows features of both form and interference functions. The interference function contributing to the SAXS pattern implied a mean microfibril centre-to-centre distance of 3.6 nm, providing an upper limit for the diameter. However modelling of the scattering pattern from an irregular array of microfibrils showed that the observed scattering curve could be matched at a range of diameters down to 2.4 nm, with the intervening space more or less sparsely occupied by hemicellulose chains. The lateral extent of the crystalline lattice normal to the 200 plane was estimated as a minimum of 2.4 nm by WAXS through the Scherrer equation, and a diameter of 2.6 nm was implied by the surface: volume ratio determined by ¹³C NMR. The WAXS and NMR measurements both depended on the assumption that the surface chains were positioned within an extension of the crystalline lattice. The reliability of this assumption is uncertain. If the surface chains deviated from the lattice, both the WAXS and the NMR data would imply larger microfibril diameters within the range consistent with the SAXS pattern. The evidence presented is therefore all consistent with microfibril diameters from about 2.4 to 3.6 nm, larger than has previously been suggested for primary-wall cellulose. Some degree of aggregation may have occurred during the isolation of the cellulose, but the larger microfibril diameters within the range proposed are a consequence of the novel interpretation of the experimental data from WAXS and NMR and are consistent with previously published data if these are similarly interpreted.     

A dedicated small‐angle X‐ray scattering beamline with a superconducting wiggler source at the NSRRC

At the National Synchrotron Radiation Research Center (NSRRC), which operates a 1.5 GeV storage ring, a dedicated small‐angle X‐ray scattering (SAXS) beamline has been installed with an in‐achromat superconducting wiggler insertion device of peak magnetic field 3.1 T. The vertical beam divergence from the X‐ray source is reduced significantly by a collimating mirror. Subsequently the beam is selectively monochromated by a double Si(111) crystal monochromator with high energy resolution (ΔE/E? 2 × 10^?4) in the energy range 5–23 keV, or by a double Mo/B₄C multilayer monochromator for 10–30 times higher flux (～10¹¹ photons s^?1) in the 6–15 keV range. These two monochromators are incorporated into one rotating cradle for fast exchange. The monochromated beam is focused by a toroidal mirror with 1:1 focusing for a small beam divergence and a beam size of ～0.9 mm × 0.3 mm (horizontal × vertical) at the focus point located 26.5 m from the radiation source. A plane mirror installed after the toroidal mirror is selectively used to deflect the beam downwards for grazing‐incidence SAXS (GISAXS) from liquid surfaces. Two online beam‐position monitors separated by 8 m provide an efficient feedback control for an overall beam‐position stability in the 10 µm range. The beam features measured, including the flux density, energy resolution, size and divergence, are consistent with those calculated using the ray‐tracing program SHADOW. With the deflectable beam of relatively high energy resolution and high flux, the new beamline meets the requirements for a wide range of SAXS applications, including anomalous SAXS for multiphase nanoparticles (e.g. semiconductor core‐shell quantum dots) and GISAXS from liquid surfaces.     

Synthesis and morphology of model PS‐b‐PDMS copolymers

True model linear poly(styrene‐b‐dimethylsiloxane) PS‐b‐PDMS copolymers were synthesized by using sequential addition of monomers and anionic polymerization (high‐vacuum techniques), employing the most recent experimental procedures that allow the controlled polymerization of each monomer to obtain blocks with controlled molar masses. The model diblock copolymers obtained were analyzed by using different techniques, such as size‐exclusion chromatography, ¹H NMR, Fourier transform infrared spectroscopy, small angle X‐rays scattering (SAXS), and wide angle X‐rays scattering (WAXS). The PS‐b‐PDMS copolymers obtained showed narrow molar mass distribution and variable PDMS content, ranging from 2 up to 55 wt %. Compacted powder samples were investigated by SAXS to reveal their structure and morphology changes on thermal treatment in the interval from 30 to 200 °C. The sample with the highest PDMS content exhibits a lamellar morphology, whereas two other samples show hexagonally packed cylinders of PDMS in a PS matrix. For the lowest PDMS content samples, the SAXS pattern corresponds to a disordered morphology and did not show any changes on thermal treatment. Detailed information about the morphology of scattering domains was obtained by fitting the SAXS scattering curves. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3119–3127, 2010     

Effect of homopolymer solubilization on triblock gel structure and mechanical response

The linear modulus, swelling behavior, and high strain response of a set of well-characterized model triblock gels were investigated to understand the effect of homopolymer solubilized within the micelle core on gel structure and mechanical properties. Structural parameters were obtained from small-angle X-ray scattering (SAXS) as well as from self-consistent field theory (SCFT) calculations. Experimental results are compared with Neo-Hookean and exponentially strain hardening models for gel behavior and rigid filler effects are discussed. The main conclusion is that the addition of homopolymer to the micelle core increases the chain stretching in both the core and coronal blocks. The total extension of a chain for a given external load is fixed by its length; however, the initial prestretch imparted to the chain due to micellization changes with the size of the micelle core and can greatly reduce the amount of extension observed for a given external force. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1395–1408, 2010